[dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update

[Lu, Wenzhuo]

Hi,


> -----Original Message-----
> From: Wang, Xiao W
> Sent: Sunday, September 25, 2016 5:00 PM
> To: Lu, Wenzhuo
> Cc: dev at dpdk.org; Yigit, Ferruh; Wang, Xiao W
> Subject: [PATCH v2 00/40] net/ixgbe: base code update
> 
> v2: - Moved minor changes into a cleanup patch.
>     - Removed some unofficial names in commit log.
> 	- Rewrote the commit log of patch 05/40 to describe what the patch
>       actually does.
>     - Improved the wording of some commit log.
> 
> Update ixgbe base driver, including the following changes:
> 
> * add X550em_a 10G PHY support
> * support flow control auto negotiation for X550em_a 1G PHY
> * add X550em_a FW ALEF support
> * increase mailbox version to ixgbe_mbox_api_13
> * add two MAC ops for Hyper-V support
> * some functional fixes
> 
> Xiao Wang (40):
>   net/ixgbe/base: fix delta check for setting VFTA
>   net/ixgbe/base: remove X550em SFP iXFI setup
>   net/ixgbe/base: change endianness of PHY data
>   net/ixgbe/base: add X550em_a 10G PHY support
>   net/ixgbe/base: move vf_update_xcast_mode to base code
>   net/ixgbe/base: introduce new ops init functions
>   net/ixgbe/base: separate PHY probe code
>   net/ixgbe/base: fully initialize X550em_a 1G PHYs
>   net/ixgbe/base: add macros for VF promiscuous mode
>   net/ixgbe/base: add FC setup for X550em_a fiber
>   net/ixgbe/base: add FC autoneg for X550em_a fiber
>   net/ixgbe/base: clear page register in error path
>   net/ixgbe/base: configure DMAC for 10Mb operation
>   net/ixgbe/base: fix function comments about X550
>   net/ixgbe/base: report setting LPE register error
>   net/ixgbe/base: bump mailbox version
>   net/ixgbe/base: access IOSF by host interface
>   net/ixgbe/base: fix check on NACK
>   net/ixgbe/base: define X550 PCIe serial MAC addr
>   net/ixgbe/base: bypass checking link for crosstalk
>   net/ixgbe/base: support X550em_a SGMII FC autoneg
>   net/ixgbe/base: add macros for GENEVE UDP port
>   net/ixgbe/base: add bound check in LED functions
>   net/ixgbe/base: use default check link function
>   net/ixgbe/base: set default autoneg speed at reset
>   net/ixgbe/base: add missing FDIRSCTPM mask setting
>   net/ixgbe/base: commonize mailbox write and read
>   net/ixgbe/base: reduce delay for SWFW semaphore
>   net/ixgbe/base: report autoneg supported for X550
>   net/ixgbe/base: remove X550em_a 100Mbps support
>   net/ixgbe/base: unify link speed value
>   net/ixgbe/base: separate ops init from PHY init
>   net/ixgbe/base: add X550em_a FW ALEF support
>   net/ixgbe/base: add two MAC ops for Hyper-V
>   net/ixgbe/base: hold semaphore for shadow RAM access
>   net/ixgbe/base: update X550em_a backplane speed
>   net/ixgbe/base: clean code of flow control autoneg
>   net/ixgbe/base: do not skip PHY configuration
>   net/ixgbe/base: clean up
>   net/ixgbe/base: add base driver update brief
> 
>  doc/guides/rel_notes/release_16_11.rst |    9 +
>  drivers/net/ixgbe/base/README          |    2 +-
>  drivers/net/ixgbe/base/ixgbe_82598.c   |    6 +-
>  drivers/net/ixgbe/base/ixgbe_82599.c   |   16 +-
>  drivers/net/ixgbe/base/ixgbe_api.c     |   11 +-
>  drivers/net/ixgbe/base/ixgbe_api.h     |    2 +
>  drivers/net/ixgbe/base/ixgbe_common.c  |  258 +++++--
>  drivers/net/ixgbe/base/ixgbe_common.h  |    3 +-
>  drivers/net/ixgbe/base/ixgbe_mbx.h     |    7 +-
>  drivers/net/ixgbe/base/ixgbe_osdep.h   |    1 +
>  drivers/net/ixgbe/base/ixgbe_phy.c     |  100 ++-
>  drivers/net/ixgbe/base/ixgbe_phy.h     |   71 +-
>  drivers/net/ixgbe/base/ixgbe_type.h    |   73 +-
>  drivers/net/ixgbe/base/ixgbe_vf.c      |  103 ++-
>  drivers/net/ixgbe/base/ixgbe_vf.h      |    3 +-
>  drivers/net/ixgbe/base/ixgbe_x540.c    |   10 +-
>  drivers/net/ixgbe/base/ixgbe_x550.c    | 1262 +++++++++++++++++++++---------
> --
>  drivers/net/ixgbe/base/ixgbe_x550.h    |   61 +-
>  drivers/net/ixgbe/ixgbe_ethdev.c       |   43 +-
>  19 files changed, 1360 insertions(+), 681 deletions(-)
> 
> --
> 1.9.3
Series-Acked-by: Wenzhuo Lu <Wenzhuo.lu at intel.com>