[dpdk-dev] [PATCH 2/2] net/i40e: remove option to disable offload flags

Bruce Richardson bruce.richardson at intel.com
Mon Apr 3 16:39:44 CEST 2017


Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little to no
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.

Signed-off-by: Bruce Richardson <bruce.richardson at intel.com>
---
 config/common_base                      |  1 -
 doc/guides/nics/i40e.rst                |  5 -----
 drivers/net/i40e/i40e_rxtx_vec_common.h |  8 --------
 drivers/net/i40e/i40e_rxtx_vec_neon.c   | 11 -----------
 drivers/net/i40e/i40e_rxtx_vec_sse.c    | 11 -----------
 5 files changed, 36 deletions(-)

diff --git a/config/common_base b/config/common_base
index 38e9483..e898f51 100644
--- a/config/common_base
+++ b/config/common_base
@@ -186,7 +186,6 @@ CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
 CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst
index 043de34..1daf63d 100644
--- a/doc/guides/nics/i40e.rst
+++ b/doc/guides/nics/i40e.rst
@@ -105,11 +105,6 @@ Please note that enabling debugging options may affect system performance.
   Toggle the use of Vector PMD instead of normal RX/TX path.
   To enable vPMD for RX, bulk allocation for Rx must be allowed.
 
-- ``CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE`` (default ``y``)
-
-  Toggle to enable RX ``olflags``.
-  This is only meaningful when Vector PMD is used.
-
 - ``CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC`` (default ``n``)
 
   Toggle to use a 16-byte RX descriptor, by default the RX descriptor is 32 byte.
diff --git a/drivers/net/i40e/i40e_rxtx_vec_common.h b/drivers/net/i40e/i40e_rxtx_vec_common.h
index 76031fe..952fd4b 100644
--- a/drivers/net/i40e/i40e_rxtx_vec_common.h
+++ b/drivers/net/i40e/i40e_rxtx_vec_common.h
@@ -224,14 +224,6 @@ i40e_rx_vec_dev_conf_condition_check_default(struct rte_eth_dev *dev)
 	struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
 	struct rte_fdir_conf *fconf = &dev->data->dev_conf.fdir_conf;
 
-#ifndef RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE
-	/* whithout rx ol_flags, no VP flag report */
-	if (rxmode->hw_vlan_strip != 0 ||
-	    rxmode->hw_vlan_extend != 0 ||
-	    rxmode->hw_ip_checksum != 0)
-		return -1;
-#endif
-
 	/* no fdir support */
 	if (fconf->mode != RTE_FDIR_MODE_NONE)
 		return -1;
diff --git a/drivers/net/i40e/i40e_rxtx_vec_neon.c b/drivers/net/i40e/i40e_rxtx_vec_neon.c
index 011c54e..adfd3e5 100644
--- a/drivers/net/i40e/i40e_rxtx_vec_neon.c
+++ b/drivers/net/i40e/i40e_rxtx_vec_neon.c
@@ -116,14 +116,6 @@ i40e_rxq_rearm(struct i40e_rx_queue *rxq)
 	I40E_PCI_REG_WRITE(rxq->qrx_tail, rx_id);
 }
 
-/* Handling the offload flags (olflags) field takes computation
- * time when receiving packets. Therefore we provide a flag to disable
- * the processing of the olflags field when they are not needed. This
- * gives improved performance, at the cost of losing the offload info
- * in the received packet
- */
-#ifdef RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE
-
 static inline void
 desc_to_olflags_v(uint64x2_t descs[4], struct rte_mbuf **rx_pkts)
 {
@@ -187,9 +179,6 @@ desc_to_olflags_v(uint64x2_t descs[4], struct rte_mbuf **rx_pkts)
 	rx_pkts[2]->ol_flags = vgetq_lane_u32(vlan0, 2);
 	rx_pkts[3]->ol_flags = vgetq_lane_u32(vlan0, 3);
 }
-#else
-#define desc_to_olflags_v(descs, rx_pkts) do {} while (0)
-#endif
 
 #define PKTLEN_SHIFT     10
 
diff --git a/drivers/net/i40e/i40e_rxtx_vec_sse.c b/drivers/net/i40e/i40e_rxtx_vec_sse.c
index 09a33c3..ace5bd7 100644
--- a/drivers/net/i40e/i40e_rxtx_vec_sse.c
+++ b/drivers/net/i40e/i40e_rxtx_vec_sse.c
@@ -124,14 +124,6 @@ desc_to_olflags_v(struct i40e_rx_queue *rxq, __m128i descs[4] __rte_unused,
 	const __m128i mbuf_init = _mm_set_epi64x(0, rxq->mbuf_initializer);
 	__m128i rearm0, rearm1, rearm2, rearm3;
 
-/* Handling the offload flags (olflags) field takes computation
- * time when receiving packets. Therefore we provide a flag to disable
- * the processing of the olflags field when they are not needed. This
- * gives improved performance, at the cost of losing the offload info
- * in the received packet
- */
-#ifdef RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE
-
 	__m128i vlan0, vlan1, rss, l3_l4e;
 
 	/* mask everything except RSS, flow director and VLAN flags
@@ -212,9 +204,6 @@ desc_to_olflags_v(struct i40e_rx_queue *rxq, __m128i descs[4] __rte_unused,
 	rearm1 = _mm_blend_epi16(mbuf_init, _mm_slli_si128(vlan0, 4), 0x10);
 	rearm2 = _mm_blend_epi16(mbuf_init, vlan0, 0x10);
 	rearm3 = _mm_blend_epi16(mbuf_init, _mm_srli_si128(vlan0, 4), 0x10);
-#else
-	rearm0 = rearm1 = rearm2 = rearm3 = mbuf_init;
-#endif
 	_mm_store_si128((__m128i *)&rx_pkts[0]->rearm_data, rearm0);
 	_mm_store_si128((__m128i *)&rx_pkts[1]->rearm_data, rearm1);
 	_mm_store_si128((__m128i *)&rx_pkts[2]->rearm_data, rearm2);
-- 
2.9.3



More information about the dev mailing list