[dpdk-dev] [PATCH v3 1/2] net/i40e: new API to add VF MAC address from PF

[Wenzhuo Lu]

Currently, rte_eth_dev_mac_addr_add is used by a
testpmd CLI to add a MAC address for VF. But the
parameter 'pool' of this API means the VMDq pool,
not VF.
So, it's wrong to use it to add the VF MAC address.
This patch provides a new API that can be used to
add VF MAC address on i40e.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
 drivers/net/i40e/rte_pmd_i40e.c           | 44 +++++++++++++++++++++++++++++++
 drivers/net/i40e/rte_pmd_i40e.h           | 20 ++++++++++++++
 drivers/net/i40e/rte_pmd_i40e_version.map |  7 +++++
 3 files changed, 71 insertions(+)

diff --git a/drivers/net/i40e/rte_pmd_i40e.c b/drivers/net/i40e/rte_pmd_i40e.c
index f12b7f4..8877239 100644
--- a/drivers/net/i40e/rte_pmd_i40e.c
+++ b/drivers/net/i40e/rte_pmd_i40e.c
@@ -2115,3 +2115,47 @@ int rte_pmd_i40e_ptype_mapping_replace(uint8_t port,
 
 	return 0;
 }
+
+int
+rte_pmd_i40e_add_vf_mac_addr(uint8_t port, uint16_t vf_id,
+			     struct ether_addr *mac_addr)
+{
+	struct rte_eth_dev *dev;
+	struct i40e_pf_vf *vf;
+	struct i40e_vsi *vsi;
+	struct i40e_pf *pf;
+	struct i40e_mac_filter_info mac_filter;
+	int ret;
+
+	if (i40e_validate_mac_addr((u8 *)mac_addr) != I40E_SUCCESS)
+		return -EINVAL;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+	dev = &rte_eth_devices[port];
+
+	if (!is_i40e_supported(dev))
+		return -ENOTSUP;
+
+	pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+
+	if (vf_id >= pf->vf_num || !pf->vfs)
+		return -EINVAL;
+
+	vf = &pf->vfs[vf_id];
+	vsi = vf->vsi;
+	if (!vsi) {
+		PMD_DRV_LOG(ERR, "Invalid VSI.");
+		return -EINVAL;
+	}
+
+	mac_filter.filter_type = RTE_MACVLAN_PERFECT_MATCH;
+	ether_addr_copy(mac_addr, &mac_filter.mac_addr);
+	ret = i40e_vsi_add_mac(vsi, &mac_filter);
+	if (ret != I40E_SUCCESS) {
+		PMD_DRV_LOG(ERR, "Failed to add MAC filter.");
+		return -1;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/i40e/rte_pmd_i40e.h b/drivers/net/i40e/rte_pmd_i40e.h
index 356fa89..155b7e8 100644
--- a/drivers/net/i40e/rte_pmd_i40e.h
+++ b/drivers/net/i40e/rte_pmd_i40e.h
@@ -637,4 +637,24 @@ int rte_pmd_i40e_ptype_mapping_replace(uint8_t port,
 				       uint8_t mask,
 				       uint32_t pkt_type);
 
+/**
+ * Add a VF MAC address.
+ *
+ * Add more MAC address for VF. The existing MAC addresses
+ * are still effective.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param vf_id
+ *   VF id.
+ * @param mac_addr
+ *   VF MAC address.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if *vf* or *mac_addr* is invalid.
+ */
+int rte_pmd_i40e_add_vf_mac_addr(uint8_t port, uint16_t vf_id,
+				 struct ether_addr *mac_addr);
+
 #endif /* _PMD_I40E_H_ */
diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map b/drivers/net/i40e/rte_pmd_i40e_version.map
index 20cc980..ef8882b 100644
--- a/drivers/net/i40e/rte_pmd_i40e_version.map
+++ b/drivers/net/i40e/rte_pmd_i40e_version.map
@@ -45,3 +45,10 @@ DPDK_17.08 {
 	rte_pmd_i40e_get_ddp_info;
 
 } DPDK_17.05;
+
+DPDK_17.11 {
+	global:
+
+	rte_pmd_i40e_add_vf_mac_addr;
+
+} DPDK_17.08;
-- 
1.9.3