[dpdk-dev] [PATCH v5 1/2] lib/security: add support for get userdata

Anoob Joseph anoob.joseph at caviumnetworks.com
Fri Dec 15 09:43:15 CET 2017


In case of inline protocol processed ingress traffic, the packet may not
have enough information to determine the security parameters with which
the packet was processed. In such cases, application could get metadata
from the packet which could be used to identify the security parameters
with which the packet was processed.

Application could register "userdata" with the security session, and
this could be retrieved from the metadata of inline processed packets.
The metadata returned by "rte_security_get_pkt_metadata()" will be
device specific. Also the driver is expected to return the application
registered "userdata" as is, without any modifications.

Signed-off-by: Anoob Joseph <anoob.joseph at caviumnetworks.com>
---
v5:
* No change

v4:
* Documented the usage of rte_mbuf.udata64 field by security library
* Removed (rte_security_get_pkt_metadata() API as the udata64 field itself
  will have device-specific metadata, and could be directly used

v3:
* Replaced 64 bit metadata in conf with (void *)userdata
* The API(rte_security_get_pkt_metadata) would return void * instead of
  uint64_t

v2:
* Replaced get_session and get_cookie APIs with get_pkt_metadata API

 doc/guides/prog_guide/rte_security.rst       | 22 +++++++++++++++++++++-
 lib/librte_security/rte_security.c           | 12 ++++++++++++
 lib/librte_security/rte_security.h           | 20 ++++++++++++++++++++
 lib/librte_security/rte_security_driver.h    | 18 ++++++++++++++++++
 lib/librte_security/rte_security_version.map |  1 +
 5 files changed, 72 insertions(+), 1 deletion(-)

diff --git a/doc/guides/prog_guide/rte_security.rst b/doc/guides/prog_guide/rte_security.rst
index 71be036..6768ebe 100644
--- a/doc/guides/prog_guide/rte_security.rst
+++ b/doc/guides/prog_guide/rte_security.rst
@@ -148,7 +148,9 @@ packet. e.g. in the case of IPSec, the IPSec tunnel headers (if any),
 ESP/AH headers will be removed from the packet and the received packet
 will contains the decrypted packet only. The driver Rx path checks the
 descriptors and based on the crypto status sets additional flags in
-``rte_mbuf.ol_flags`` field.
+``rte_mbuf.ol_flags`` field. The driver would also set device-specific
+metadata in ``rte_mbuf.udata64`` field. This will allow the application
+to identify the security processing done on the packet.
 
 .. note::
 
@@ -421,6 +423,22 @@ For Inline Crypto and Inline protocol offload, device specific defined metadata
 updated in the mbuf using ``rte_security_set_pkt_metadata()`` if
 ``DEV_TX_OFFLOAD_SEC_NEED_MDATA`` is set.
 
+For inline protocol offloaded ingress traffic, the application can register a
+pointer, ``userdata`` , in the security session. When the packet is received,
+``rte_security_get_userdata()`` would return the userdata registered for the
+security session which processed the packet.
+
+.. note::
+
+    In case of inline processed packets, ``rte_mbuf.udata64`` field would be
+    used by the driver to relay information on the security processing
+    associated with the packet. In ingress, the driver would set this in Rx
+    path while in egress, ``rte_security_set_pkt_metadata()`` would perform a
+    similar operation. The application is expected not to modify the field
+    when it has relevant info. For ingress, this device-specific 64 bit value
+    is required to derive other information (like userdata), required for
+    identifying the security processing done on the packet.
+
 Security session configuration
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -440,6 +458,8 @@ Security Session configuration structure is defined as ``rte_security_session_co
         /**< Configuration parameters for security session */
         struct rte_crypto_sym_xform *crypto_xform;
         /**< Security Session Crypto Transformations */
+        void *userdata;
+        /**< Application specific userdata to be saved with session */
     };
 
 The configuration structure reuses the ``rte_crypto_sym_xform`` struct for crypto related
diff --git a/lib/librte_security/rte_security.c b/lib/librte_security/rte_security.c
index 1227fca..5805051 100644
--- a/lib/librte_security/rte_security.c
+++ b/lib/librte_security/rte_security.c
@@ -108,6 +108,18 @@ rte_security_set_pkt_metadata(struct rte_security_ctx *instance,
 					       sess, m, params);
 }
 
+void *
+rte_security_get_userdata(struct rte_security_ctx *instance, uint64_t md)
+{
+	void *userdata = NULL;
+
+	RTE_FUNC_PTR_OR_ERR_RET(*instance->ops->get_userdata, NULL);
+	if (instance->ops->get_userdata(instance->device, md, &userdata))
+		return NULL;
+
+	return userdata;
+}
+
 const struct rte_security_capability *
 rte_security_capabilities_get(struct rte_security_ctx *instance)
 {
diff --git a/lib/librte_security/rte_security.h b/lib/librte_security/rte_security.h
index 653929b..a34cbba 100644
--- a/lib/librte_security/rte_security.h
+++ b/lib/librte_security/rte_security.h
@@ -274,6 +274,8 @@ struct rte_security_session_conf {
 	/**< Configuration parameters for security session */
 	struct rte_crypto_sym_xform *crypto_xform;
 	/**< Security Session Crypto Transformations */
+	void *userdata;
+	/**< Application specific userdata to be saved with session */
 };
 
 struct rte_security_session {
@@ -346,6 +348,24 @@ rte_security_set_pkt_metadata(struct rte_security_ctx *instance,
 			      struct rte_mbuf *mb, void *params);
 
 /**
+ * Get userdata associated with the security session which processed the
+ * packet. This userdata would be registered while creating the session, and
+ * application can use this to identify the SA etc. Device-specific metadata
+ * in the mbuf would be used for this.
+ *
+ * This is valid only for inline processed ingress packets.
+ *
+ * @param   instance	security instance
+ * @param   md		device-specific metadata set in mbuf
+ *
+ * @return
+ *  - On success, userdata
+ *  - On failure, NULL
+ */
+void *
+rte_security_get_userdata(struct rte_security_ctx *instance, uint64_t md);
+
+/**
  * Attach a session to a symmetric crypto operation
  *
  * @param	sym_op	crypto operation
diff --git a/lib/librte_security/rte_security_driver.h b/lib/librte_security/rte_security_driver.h
index 997fbe7..4e93362 100644
--- a/lib/librte_security/rte_security_driver.h
+++ b/lib/librte_security/rte_security_driver.h
@@ -122,6 +122,22 @@ typedef int (*security_set_pkt_metadata_t)(void *device,
 		void *params);
 
 /**
+ * Get application specific userdata associated with the security session which
+ * processed the packet. This would be retrieved using the metadata obtained
+ * from packet.
+ *
+ * @param	device		Crypto/eth device pointer
+ * @param	md		Metadata
+ * @param	userdata	Pointer to receive userdata
+ *
+ * @return
+ *  - Returns 0 if userdata is retrieved successfully.
+ *  - Returns -ve value for errors.
+ */
+typedef int (*security_get_userdata_t)(void *device,
+		uint64_t md, void **userdata);
+
+/**
  * Get security capabilities of the device.
  *
  * @param	device		crypto/eth device pointer
@@ -145,6 +161,8 @@ struct rte_security_ops {
 	/**< Clear a security sessions private data. */
 	security_set_pkt_metadata_t set_pkt_metadata;
 	/**< Update mbuf metadata. */
+	security_get_userdata_t get_userdata;
+	/**< Get userdata associated with session which processed the packet. */
 	security_capabilities_get_t capabilities_get;
 	/**< Get security capabilities. */
 };
diff --git a/lib/librte_security/rte_security_version.map b/lib/librte_security/rte_security_version.map
index e12c04b..87f35d7 100644
--- a/lib/librte_security/rte_security_version.map
+++ b/lib/librte_security/rte_security_version.map
@@ -9,6 +9,7 @@ EXPERIMENTAL {
 	rte_security_session_stats_get;
 	rte_security_session_update;
 	rte_security_set_pkt_metadata;
+	rte_security_get_userdata;
 
 	local: *;
 };
-- 
2.7.4



More information about the dev mailing list