[dpdk-dev] [PATCH v5 2/2] examples/ipsec-secgw: add support for inline protocol

Anoob Joseph anoob.joseph at caviumnetworks.com
Fri Dec 15 09:43:16 CET 2017


Adding support for inline protocol processing

In ingress side, application will receive regular IP packets, without
any IPsec related info. Application will do a selector check (SP-SA
check) by making use of the metadata from the packet. The
device-specific metadata in mbuf would aid in determing the security
session which processed the packet.

In egress side, the plain packet would be submitted to the driver. The
packet will have optional metadata, which could be used to identify the
security session associated with the packet.

Signed-off-by: Anoob Joseph <anoob.joseph at caviumnetworks.com>
---
v5:
* Fixed checkpatch reported warnings

v4:
* Directly using rte_mbuf.udata64 as the metadata from the packet
* Removed usage of rte_security_get_pkt_metadata API

v3:
* Using (void *)userdata instead of 64 bit metadata in conf
* Changes parallel to the change in API

v2:
* Using get_pkt_metadata API instead of get_session & get_cookie APIs

 examples/ipsec-secgw/esp.c         |   6 +-
 examples/ipsec-secgw/ipsec-secgw.c |  42 ++++++++++++-
 examples/ipsec-secgw/ipsec.c       | 121 +++++++++++++++++++++++++++++++------
 3 files changed, 147 insertions(+), 22 deletions(-)

diff --git a/examples/ipsec-secgw/esp.c b/examples/ipsec-secgw/esp.c
index c3efe52..561f873 100644
--- a/examples/ipsec-secgw/esp.c
+++ b/examples/ipsec-secgw/esp.c
@@ -178,7 +178,8 @@ esp_inbound_post(struct rte_mbuf *m, struct ipsec_sa *sa,
 	RTE_ASSERT(sa != NULL);
 	RTE_ASSERT(cop != NULL);
 
-	if (sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO) {
+	if ((sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL) ||
+			(sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO)) {
 		if (m->ol_flags & PKT_RX_SEC_OFFLOAD) {
 			if (m->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED)
 				cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
@@ -474,7 +475,8 @@ esp_outbound_post(struct rte_mbuf *m,
 	RTE_ASSERT(m != NULL);
 	RTE_ASSERT(sa != NULL);
 
-	if (sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO) {
+	if ((sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL) ||
+			(sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO)) {
 		m->ol_flags |= PKT_TX_SEC_OFFLOAD;
 	} else {
 		RTE_ASSERT(cop != NULL);
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index c98454a..8254056 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -265,6 +265,40 @@ prepare_one_packet(struct rte_mbuf *pkt, struct ipsec_traffic *t)
 		RTE_LOG(ERR, IPSEC, "Unsupported packet type\n");
 		rte_pktmbuf_free(pkt);
 	}
+
+	/* Check if the packet has been processed inline. For inline protocol
+	 * processed packets, the metadata in the mbuf can be used to identify
+	 * the security processing done on the packet. The metadata will be
+	 * used to retrieve the application registered userdata associated
+	 * with the security session.
+	 */
+
+	if (pkt->ol_flags & PKT_RX_SEC_OFFLOAD) {
+		struct ipsec_sa *sa;
+		struct ipsec_mbuf_metadata *priv;
+		struct rte_security_ctx *ctx = (struct rte_security_ctx *)
+						rte_eth_dev_get_sec_ctx(
+						pkt->port);
+
+		/* Retrieve the userdata registered. Here, the userdata
+		 * registered is the SA pointer.
+		 */
+
+		sa = (struct ipsec_sa *)
+				rte_security_get_userdata(ctx, pkt->udata64);
+
+		if (sa == NULL) {
+			/* userdata could not be retrieved */
+			return;
+		}
+
+		/* Save SA as priv member in mbuf. This will be used in the
+		 * IPsec selector(SP-SA) check.
+		 */
+
+		priv = get_priv(pkt);
+		priv->sa = sa;
+	}
 }
 
 static inline void
@@ -401,11 +435,17 @@ inbound_sp_sa(struct sp_ctx *sp, struct sa_ctx *sa, struct traffic_type *ip,
 			ip->pkts[j++] = m;
 			continue;
 		}
-		if (res & DISCARD || i < lim) {
+		if (res & DISCARD) {
 			rte_pktmbuf_free(m);
 			continue;
 		}
+
 		/* Only check SPI match for processed IPSec packets */
+		if (i < lim && ((m->ol_flags & PKT_RX_SEC_OFFLOAD) == 0)) {
+			rte_pktmbuf_free(m);
+			continue;
+		}
+
 		sa_idx = ip->res[i] & PROTECT_MASK;
 		if (sa_idx == 0 || !inbound_sa_check(sa, m, sa_idx)) {
 			rte_pktmbuf_free(m);
diff --git a/examples/ipsec-secgw/ipsec.c b/examples/ipsec-secgw/ipsec.c
index 70ed227..bd68ec6 100644
--- a/examples/ipsec-secgw/ipsec.c
+++ b/examples/ipsec-secgw/ipsec.c
@@ -46,6 +46,27 @@
 #include "ipsec.h"
 #include "esp.h"
 
+static inline void
+set_ipsec_conf(struct ipsec_sa *sa, struct rte_security_ipsec_xform *ipsec)
+{
+	if (ipsec->mode == RTE_SECURITY_IPSEC_SA_MODE_TUNNEL) {
+		struct rte_security_ipsec_tunnel_param *tunnel =
+				&ipsec->tunnel;
+		if (sa->flags == IP4_TUNNEL) {
+			tunnel->type =
+				RTE_SECURITY_IPSEC_TUNNEL_IPV4;
+			tunnel->ipv4.ttl = IPDEFTTL;
+
+			memcpy((uint8_t *)&tunnel->ipv4.src_ip,
+				(uint8_t *)&sa->src.ip.ip4, 4);
+
+			memcpy((uint8_t *)&tunnel->ipv4.dst_ip,
+				(uint8_t *)&sa->dst.ip.ip4, 4);
+		}
+		/* TODO support for Transport and IPV6 tunnel */
+	}
+}
+
 static inline int
 create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
 {
@@ -95,7 +116,8 @@ create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
 					RTE_SECURITY_IPSEC_SA_MODE_TUNNEL :
 					RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
 			} },
-			.crypto_xform = sa->xforms
+			.crypto_xform = sa->xforms,
+			.userdata = NULL,
 
 		};
 
@@ -104,23 +126,8 @@ create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
 							rte_cryptodev_get_sec_ctx(
 							ipsec_ctx->tbl[cdev_id_qp].id);
 
-			if (sess_conf.ipsec.mode ==
-					RTE_SECURITY_IPSEC_SA_MODE_TUNNEL) {
-				struct rte_security_ipsec_tunnel_param *tunnel =
-						&sess_conf.ipsec.tunnel;
-				if (sa->flags == IP4_TUNNEL) {
-					tunnel->type =
-						RTE_SECURITY_IPSEC_TUNNEL_IPV4;
-					tunnel->ipv4.ttl = IPDEFTTL;
-
-					memcpy((uint8_t *)&tunnel->ipv4.src_ip,
-						(uint8_t *)&sa->src.ip.ip4, 4);
-
-					memcpy((uint8_t *)&tunnel->ipv4.dst_ip,
-						(uint8_t *)&sa->dst.ip.ip4, 4);
-				}
-				/* TODO support for Transport and IPV6 tunnel */
-			}
+			/* Set IPsec parameters in conf */
+			set_ipsec_conf(sa, &(sess_conf.ipsec));
 
 			sa->sec_session = rte_security_session_create(ctx,
 					&sess_conf, ipsec_ctx->session_pool);
@@ -206,6 +213,70 @@ create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
 					err.message);
 				return -1;
 			}
+		} else if (sa->type ==
+				RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL) {
+			struct rte_security_ctx *ctx =
+					(struct rte_security_ctx *)
+					rte_eth_dev_get_sec_ctx(sa->portid);
+			const struct rte_security_capability *sec_cap;
+
+			if (ctx == NULL) {
+				RTE_LOG(ERR, IPSEC,
+				"Ethernet device doesn't have security features registered\n");
+				return -1;
+			}
+
+			/* Set IPsec parameters in conf */
+			set_ipsec_conf(sa, &(sess_conf.ipsec));
+
+			/* Save SA as userdata for the security session. When
+			 * the packet is received, this userdata will be
+			 * retrieved using the metadata from the packet.
+			 *
+			 * This is required only for inbound SAs.
+			 */
+
+			if (sa->direction == RTE_SECURITY_IPSEC_SA_DIR_INGRESS)
+				sess_conf.userdata = (void *) sa;
+
+			sa->sec_session = rte_security_session_create(ctx,
+					&sess_conf, ipsec_ctx->session_pool);
+			if (sa->sec_session == NULL) {
+				RTE_LOG(ERR, IPSEC,
+				"SEC Session init failed: err: %d\n", ret);
+				return -1;
+			}
+
+			sec_cap = rte_security_capabilities_get(ctx);
+
+			if (sec_cap == NULL) {
+				RTE_LOG(ERR, IPSEC,
+				"No capabilities registered\n");
+				return -1;
+			}
+
+			/* iterate until ESP tunnel*/
+			while (sec_cap->action !=
+					RTE_SECURITY_ACTION_TYPE_NONE) {
+
+				if (sec_cap->action == sa->type &&
+				    sec_cap->protocol ==
+					RTE_SECURITY_PROTOCOL_IPSEC &&
+				    sec_cap->ipsec.mode ==
+					RTE_SECURITY_IPSEC_SA_MODE_TUNNEL &&
+				    sec_cap->ipsec.direction == sa->direction)
+					break;
+				sec_cap++;
+			}
+
+			if (sec_cap->action == RTE_SECURITY_ACTION_TYPE_NONE) {
+				RTE_LOG(ERR, IPSEC,
+				"No suitable security capability found\n");
+				return -1;
+			}
+
+			sa->ol_flags = sec_cap->ol_flags;
+			sa->security_ctx = ctx;
 		}
 	} else {
 		sa->crypto_session = rte_cryptodev_sym_session_create(
@@ -323,7 +394,19 @@ ipsec_enqueue(ipsec_xform_fn xform_func, struct ipsec_ctx *ipsec_ctx,
 			}
 			break;
 		case RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL:
-			break;
+			if ((unlikely(sa->sec_session == NULL)) &&
+					create_session(ipsec_ctx, sa)) {
+				rte_pktmbuf_free(pkts[i]);
+				continue;
+			}
+
+			cqp = &ipsec_ctx->tbl[sa->cdev_id_qp];
+			cqp->ol_pkts[cqp->ol_pkts_cnt++] = pkts[i];
+			if (sa->ol_flags & RTE_SECURITY_TX_OLOAD_NEED_MDATA)
+				rte_security_set_pkt_metadata(
+						sa->security_ctx,
+						sa->sec_session, pkts[i], NULL);
+			continue;
 		case RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO:
 			priv->cop.type = RTE_CRYPTO_OP_TYPE_SYMMETRIC;
 			priv->cop.status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
-- 
2.7.4



More information about the dev mailing list