[dpdk-dev] [PATCH 6/6] doc: add DPAA eventdev guide

Sunil Kumar Kori sunil.kori at nxp.com
Fri Dec 15 13:59:33 CET 2017


Signed-off-by: Sunil Kumar Kori <sunil.kori at nxp.com>
---
 doc/guides/eventdevs/dpaa.rst  | 144 +++++++++++++++++++++++++++++++++++++++++
 doc/guides/eventdevs/index.rst |   1 +
 2 files changed, 145 insertions(+)
 create mode 100644 doc/guides/eventdevs/dpaa.rst

diff --git a/doc/guides/eventdevs/dpaa.rst b/doc/guides/eventdevs/dpaa.rst
new file mode 100644
index 0000000..9224ebc
--- /dev/null
+++ b/doc/guides/eventdevs/dpaa.rst
@@ -0,0 +1,144 @@
+.. SPDX-License-Identifier:        BSD-3-Clause
+   Copyright 2017 NXP
+
+NXP DPAA Eventdev Driver
+=========================
+
+The dpaa eventdev is an implementation of the eventdev API, that provides a
+wide range of the eventdev features. The eventdev relies on a dpaa based
+platform to perform event scheduling.
+
+More information can be found at `NXP Official Website
+<http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-arm-processors:QORIQ-ARM>`_.
+
+Features
+--------
+
+The DPAA EVENTDEV implements many features in the eventdev API;
+
+- Hardware based event scheduler
+- 4 event ports
+- 4 event queues
+- Parallel flows
+- Atomic flows
+
+Supported DPAA SoCs
+--------------------
+
+- LS1046A
+- LS1043A
+
+Prerequisites
+-------------
+
+There are following pre-requisities for executing EVENTDEV on a DPAA compatible
+platform:
+
+1. **ARM 64 Tool Chain**
+
+  For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08/aarch64-linux-gnu/>`_.
+
+2. **Linux Kernel**
+
+   It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
+
+3. **Rootfile system**
+
+   Any *aarch64* supporting filesystem can be used. For example,
+   Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
+   from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
+
+As an alternative method, DPAA EVENTDEV can also be executed using images provided
+as part of SDK from NXP. The SDK includes all the above prerequisites necessary
+to bring up a DPAA board.
+
+The following dependencies are not part of DPDK and must be installed
+separately:
+
+- **NXP Linux SDK**
+
+  NXP Linux software development kit (SDK) includes support for family
+  of QorIQ® ARM-Architecture-based system on chip (SoC) processors
+  and corresponding boards.
+
+  It includes the Linux board support packages (BSPs) for NXP SoCs,
+  a fully operational tool chain, kernel and board specific modules.
+
+  SDK and related information can be obtained from:  `NXP QorIQ SDK  <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
+
+- **DPDK Extra Scripts**
+
+  DPAA based resources can be configured easily with the help of ready to use
+  xml files as provided in the DPDK Extra repository.
+
+  `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
+
+Currently supported by DPDK:
+
+- NXP SDK **2.0+** or LSDK **17.09+**
+- Supported architectures:  **arm64 LE**.
+
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+
+Pre-Installation Configuration
+------------------------------
+
+Config File Options
+~~~~~~~~~~~~~~~~~~~
+
+The following options can be modified in the ``config`` file.
+Please note that enabling debugging options may affect system performance.
+
+- ``CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV`` (default ``y``)
+
+  Toggle compilation of the ``librte_pmd_dpaa_event`` driver.
+
+- ``CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV_DEBUG`` (default ``n``)
+
+  Toggle display of generic debugging messages
+
+Driver Compilation
+~~~~~~~~~~~~~~~~~~
+
+To compile the DPAA EVENTDEV PMD for Linux arm64 gcc target, run the
+following ``make`` command:
+
+.. code-block:: console
+
+   cd <DPDK-source-directory>
+   make config T=arm64-dpaa-linuxapp-gcc install
+
+Initialization
+--------------
+
+The dpaa eventdev is exposed as a vdev device which consists of a set of channels
+and queues. On EAL initialization, dpaa components will be
+probed and then vdev device can be created from the application code by
+
+* Invoking ``rte_vdev_init("event_dpaa")`` from the application
+
+* Using ``--vdev="event_dpaa"`` in the EAL options, which will call
+  rte_vdev_init() internally
+
+Example:
+
+.. code-block:: console
+
+    ./your_eventdev_application --vdev="event_dpaa"
+
+Limitations
+-----------
+
+1. DPAA eventdev can not work with DPAA PUSH mode queues configured for ethdev.
+   Please configure export DPAA_NUM_PUSH_QUEUES=0
+
+Platform Requirement
+~~~~~~~~~~~~~~~~~~~~
+
+DPAA drivers for DPDK can only work on NXP SoCs as listed in the
+``Supported DPAA SoCs``.
+
+Port-core binding
+~~~~~~~~~~~~~~~~~
+
+DPAA EVENTDEV driver requires event port 'x' to be used on core 'x'.
diff --git a/doc/guides/eventdevs/index.rst b/doc/guides/eventdevs/index.rst
index ba2048c..22f6480 100644
--- a/doc/guides/eventdevs/index.rst
+++ b/doc/guides/eventdevs/index.rst
@@ -38,5 +38,6 @@ application trough the eventdev API.
     :numbered:
 
     dpaa2
+    dpaa
     sw
     octeontx
-- 
2.9.3



More information about the dev mailing list