[dpdk-dev] [PATCH v1 6/6] net: fix rte_ether conflicts with libc

Adrien Mazarguil adrien.mazarguil at 6wind.com
Thu Dec 21 14:00:06 CET 2017


Applications can't combine either net/ethernet.h or netinet/ether.h
together with rte_ether.h due to the redefinition of struct ether_addr and
various macros by the latter.

This patch adapts rte_ether.h to rely on system definitions while
maintaining DPDK additions.

An unforeseen consequence of involving more system header files compilation
issues with some base drivers (i40e, ixgbe) defining their own conflicting
types (e.g. __le64). This is addressed by explicitly including rte_ether.h
where missing to ensure system definitions always come first.

Signed-off-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
Cc: Olivier Matz <olivier.matz at 6wind.com>
Cc: Bruce Richardson <bruce.richardson at intel.com>
---
This patch should work but wasn't validated on FreeBSD, any volunteers?
---
 drivers/net/i40e/base/i40e_osdep.h   |  1 +
 drivers/net/ixgbe/base/ixgbe_osdep.h |  1 +
 drivers/net/qede/base/bcm_osal.h     |  1 -
 lib/librte_net/rte_ether.h           | 30 ++++++++++++++++++++----------
 4 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/net/i40e/base/i40e_osdep.h b/drivers/net/i40e/base/i40e_osdep.h
index 8e5c593c9..0f53d8f66 100644
--- a/drivers/net/i40e/base/i40e_osdep.h
+++ b/drivers/net/i40e/base/i40e_osdep.h
@@ -40,6 +40,7 @@
 #include <stdarg.h>
 
 #include <rte_common.h>
+#include <rte_ether.h>
 #include <rte_memcpy.h>
 #include <rte_byteorder.h>
 #include <rte_cycles.h>
diff --git a/drivers/net/ixgbe/base/ixgbe_osdep.h b/drivers/net/ixgbe/base/ixgbe_osdep.h
index bb5dfd2af..a59d2a63f 100644
--- a/drivers/net/ixgbe/base/ixgbe_osdep.h
+++ b/drivers/net/ixgbe/base/ixgbe_osdep.h
@@ -41,6 +41,7 @@
 #include <stdarg.h>
 #include <rte_common.h>
 #include <rte_debug.h>
+#include <rte_ether.h>
 #include <rte_cycles.h>
 #include <rte_log.h>
 #include <rte_byteorder.h>
diff --git a/drivers/net/qede/base/bcm_osal.h b/drivers/net/qede/base/bcm_osal.h
index 52c2f0ec9..c4c8e179e 100644
--- a/drivers/net/qede/base/bcm_osal.h
+++ b/drivers/net/qede/base/bcm_osal.h
@@ -334,7 +334,6 @@ u32 qede_find_first_zero_bit(unsigned long *, u32);
 	qede_find_first_zero_bit(bitmap, length)
 
 #define OSAL_BUILD_BUG_ON(cond)		nothing
-#define ETH_ALEN			ETHER_ADDR_LEN
 
 #define OSAL_BITMAP_WEIGHT(bitmap, count) 0
 
diff --git a/lib/librte_net/rte_ether.h b/lib/librte_net/rte_ether.h
index 06d7b486c..19e62ea89 100644
--- a/lib/librte_net/rte_ether.h
+++ b/lib/librte_net/rte_ether.h
@@ -44,6 +44,7 @@
 extern "C" {
 #endif
 
+#include <net/ethernet.h>
 #include <stdint.h>
 #include <stdio.h>
 
@@ -52,15 +53,7 @@ extern "C" {
 #include <rte_mbuf.h>
 #include <rte_byteorder.h>
 
-#define ETHER_ADDR_LEN  6 /**< Length of Ethernet address. */
-#define ETHER_TYPE_LEN  2 /**< Length of Ethernet type field. */
-#define ETHER_CRC_LEN   4 /**< Length of Ethernet CRC. */
-#define ETHER_HDR_LEN   \
-	(ETHER_ADDR_LEN * 2 + ETHER_TYPE_LEN) /**< Length of Ethernet header. */
-#define ETHER_MIN_LEN   64    /**< Minimum frame len, including CRC. */
-#define ETHER_MAX_LEN   1518  /**< Maximum frame len, including CRC. */
-#define ETHER_MTU       \
-	(ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN) /**< Ethernet MTU. */
+#define ETHER_MTU ETHERMTU /**< Deprecated, defined for compatibility. */
 
 #define ETHER_MAX_VLAN_FRAME_LEN \
 	(ETHER_MAX_LEN + 4) /**< Maximum VLAN frame length, including CRC. */
@@ -72,8 +65,11 @@ extern "C" {
 
 #define ETHER_MIN_MTU 68 /**< Minimum MTU for IPv4 packets, see RFC 791. */
 
+#ifdef __DOXYGEN__
+
 /**
- * Ethernet address:
+ * Ethernet address.
+ *
  * A universally administered address is uniquely assigned to a device by its
  * manufacturer. The first three octets (in transmission order) contain the
  * Organizationally Unique Identifier (OUI). The following three (MAC-48 and
@@ -82,11 +78,25 @@ extern "C" {
  * A locally administered address is assigned to a device by a network
  * administrator and does not contain OUIs.
  * See http://standards.ieee.org/regauth/groupmac/tutorial.html
+ *
+ * This structure is defined system-wide by "net/ethernet.h", however since
+ * the name of its data field is OS-dependent, a macro named "addr_bytes" is
+ * defined as an alias for the convenience of DPDK applications.
+ *
+ * The following definition is only for documentation purposes.
  */
 struct ether_addr {
 	uint8_t addr_bytes[ETHER_ADDR_LEN]; /**< Addr bytes in tx order */
 } __attribute__((__packed__));
 
+#endif /* __DOXYGEN__ */
+
+#if defined(__FreeBSD__)
+#define addr_bytes octet
+#else
+#define addr_bytes ether_addr_octet
+#endif
+
 #define ETHER_LOCAL_ADMIN_ADDR 0x02 /**< Locally assigned Eth. address. */
 #define ETHER_GROUP_ADDR       0x01 /**< Multicast or broadcast Eth. address. */
 
-- 
2.11.0


More information about the dev mailing list