[dpdk-dev] [PATCH 4/5] net/tap: fix up log message to correct channel
Pascal Mazon
pascal.mazon at 6wind.com
Fri Feb 3 10:45:32 CET 2017
On Thu, 2 Feb 2017 16:33:29 -0600
Keith Wiles <keith.wiles at intel.com> wrote:
> Signed-off-by: Keith Wiles <keith.wiles at intel.com>
> ---
> drivers/net/tap/rte_eth_tap.c | 39 +++++++++++++++++++--------------------
> 1 file changed, 19 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
> index 6673182..4f7eacf 100644
> --- a/drivers/net/tap/rte_eth_tap.c
> +++ b/drivers/net/tap/rte_eth_tap.c
> @@ -167,7 +167,7 @@ tun_alloc(char *name, uint16_t qid)
>
> /* Set the TUN/TAP configuration and get the name if needed
> */ if (ioctl(fd, TUNSETIFF, (void *)&ifr) < 0) {
> - RTE_LOG(ERR, PMD, "Unable to set TUNSETIFF for %s\n",
> + RTE_LOG(WARNING, PMD, "Unable to set TUNSETIFF for
> %s\n", ifr.ifr_name);
> perror("TUNSETIFF");
> goto error;
> @@ -206,7 +206,7 @@ pmd_rx_burst(void *queue, struct rte_mbuf **bufs,
> uint16_t nb_pkts) /* allocate the next mbuf */
> mbuf = rte_pktmbuf_alloc(rxq->mp);
> if (unlikely(!mbuf)) {
> - RTE_LOG(WARNING, PMD, "Unable to allocate mbuf\n");
> + RTE_LOG(WARNING, PMD, "TAP unable to allocate
> mbuf\n"); break;
> }
>
> @@ -559,8 +559,8 @@ tap_rx_queue_setup(struct rte_eth_dev *dev,
> int fd;
>
> if ((rx_queue_id >= internals->nb_queues) || !mp) {
> - RTE_LOG(ERR, PMD, "nb_queues %d mp %p\n",
> - internals->nb_queues, mp);
> + RTE_LOG(WARNING, PMD, "nb_queues %d too small or mempool
> NULL\n",
> + internals->nb_queues);
> return -1;
> }
>
> @@ -572,7 +572,7 @@ tap_rx_queue_setup(struct rte_eth_dev *dev,
> RTE_PKTMBUF_HEADROOM);
>
> if (buf_size < ETH_FRAME_LEN) {
> - RTE_LOG(ERR, PMD,
> + RTE_LOG(WARNING, PMD,
> "%s: %d bytes will not fit in mbuf (%d bytes)\n",
> dev->data->name, ETH_FRAME_LEN, buf_size);
> return -ENOMEM;
> @@ -582,7 +582,7 @@ tap_rx_queue_setup(struct rte_eth_dev *dev,
> if (fd == -1)
> return -1;
>
> - RTE_LOG(INFO, PMD, "RX TAP device name %s, qid %d on fd %d\n",
> + RTE_LOG(DEBUG, PMD, " RX TAP device name %s, qid %d on fd %d\n",
> internals->name, rx_queue_id,
> internals->rxq[rx_queue_id].fd);
> return 0;
> @@ -605,7 +605,7 @@ tap_tx_queue_setup(struct rte_eth_dev *dev,
> if (ret == -1)
> return -1;
>
> - RTE_LOG(INFO, PMD, "TX TAP device name %s, qid %d on fd %d\n",
> + RTE_LOG(DEBUG, PMD, " TX TAP device name %s, qid %d on fd %d\n",
> internals->name, tx_queue_id,
> internals->txq[tx_queue_id].fd);
> return 0;
> @@ -643,7 +643,7 @@ pmd_mac_address(int fd, struct rte_eth_dev *dev, struct
> ether_addr *addr) memset(&ifr, 0, sizeof(ifr));
>
> if (ioctl(fd, SIOCGIFHWADDR, &ifr) == -1) {
> - RTE_LOG(ERR, PMD, "ioctl failed (SIOCGIFHWADDR) (%s)\n",
> + RTE_LOG(WARNING, PMD, "ioctl failed (SIOCGIFHWADDR) (%s)\n",
> ifr.ifr_name);
> return -1;
> }
> @@ -662,26 +662,25 @@ eth_dev_tap_create(const char *name, char *tap_name)
> struct rte_eth_dev_data *data = NULL;
> int i, fd = -1;
>
> - RTE_LOG(INFO, PMD,
> - "%s: Create TAP Ethernet device with %d queues on numa %u\n",
> - name, RTE_PMD_TAP_MAX_QUEUES, rte_socket_id());
> + RTE_LOG(DEBUG, PMD, " TAP device with %d queues on numa %u\n",
> + RTE_PMD_TAP_MAX_QUEUES, rte_socket_id());
>
> data = rte_zmalloc_socket(tap_name, sizeof(*data), 0, numa_node);
> if (!data) {
> - RTE_LOG(ERR, PMD, "Failed to allocate data\n");
> + RTE_LOG(ERR, PMD, "TAP Failed to allocate data\n");
> goto error_exit;
> }
>
> pmd = rte_zmalloc_socket(tap_name, sizeof(*pmd), 0, numa_node);
> if (!pmd) {
> - RTE_LOG(ERR, PMD, "Unable to allocate internal struct\n");
> + RTE_LOG(ERR, PMD, "TAP Unable to allocate internal
> struct\n"); goto error_exit;
> }
>
> /* Use the name and not the tap_name */
> dev = rte_eth_dev_allocate(tap_name);
> if (!dev) {
> - RTE_LOG(ERR, PMD, "Unable to allocate device struct\n");
> + RTE_LOG(ERR, PMD, "TAP Unable to allocate device struct\n");
> goto error_exit;
> }
>
> @@ -712,7 +711,7 @@ eth_dev_tap_create(const char *name, char *tap_name)
> /* Create the first Tap device */
> fd = tun_alloc(tap_name, 0);
> if (fd < 0) {
> - RTE_LOG(ERR, PMD, "tun_alloc() failed\n");
> + RTE_LOG(ERR, PMD, "TAP tun_alloc() failed for %s\n",
> tap_name); goto error_exit;
> }
>
> @@ -734,7 +733,7 @@ eth_dev_tap_create(const char *name, char *tap_name)
> return 0;
>
> error_exit:
> - RTE_PMD_DEBUG_TRACE("Unable to initialize %s\n", name);
> + RTE_LOG(DEBUG, PMD, "TAP Unable to initialize %s\n", name);
>
> if (fd > 0)
> close(fd);
> @@ -787,7 +786,7 @@ rte_pmd_tap_probe(const char *name, const char *params)
> DEFAULT_TAP_NAME, tap_unit++);
>
> if (params && (params[0] != '\0')) {
> - RTE_LOG(INFO, PMD, "paramaters (%s)\n", params);
> + RTE_LOG(DEBUG, PMD, "paramaters (%s)\n", params);
>
> kvlist = rte_kvargs_parse(params, valid_arguments);
> if (kvlist) {
> @@ -812,14 +811,14 @@ rte_pmd_tap_probe(const char *name, const char *params)
> }
> pmd_link.link_speed = speed;
>
> - RTE_LOG(INFO, PMD, "Initializing pmd_tap for %s as %s\n",
> + RTE_LOG(NOTICE, PMD, "Initializing pmd_tap for %s as %s\n",
> name, tap_name);
>
> ret = eth_dev_tap_create(name, tap_name);
>
> leave:
> if (ret == -1) {
> - RTE_LOG(INFO, PMD, "Failed to create pmd for %s as %s\n",
> + RTE_LOG(ERR, PMD, "Failed to create pmd for %s as %s\n",
> name, tap_name);
> tap_unit--; /* Restore the unit number */
> }
> @@ -837,7 +836,7 @@ rte_pmd_tap_remove(const char *name)
> struct pmd_internals *internals;
> int i;
>
> - RTE_LOG(INFO, PMD, "Closing TUN/TAP Ethernet device on numa %u\n",
> + RTE_LOG(DEBUG, PMD, "Closing TUN/TAP Ethernet device on numa %u\n",
> rte_socket_id());
>
> /* find the ethdev entry */
Acked-by: Pascal Mazon <pascal.mazon at 6wind.com>
More information about the dev
mailing list