[dpdk-dev] [PATCH v8 2/3] doc: add SW eventdev pipeline to sample app ug

David Hunt david.hunt at intel.com
Thu Jul 6 16:35:15 CEST 2017


From: Harry van Haaren <harry.van.haaren at intel.com>

Add a new entry in the sample app user-guides,
which details the working of the eventdev_pipeline_sw.

Signed-off-by: Harry van Haaren <harry.van.haaren at intel.com>
Signed-off-by: David Hunt <david.hunt at intel.com>
Acked-by: John McNamara <john.mcnamara at intel.com>
Acked-by: Jerin Jacob <jerin.jacob at caviumnetworks.com>
---
 MAINTAINERS                                        |   1 +
 .../sample_app_ug/eventdev_pipeline_sw_pmd.rst     | 190 +++++++++++++++++++++
 doc/guides/sample_app_ug/index.rst                 |   1 +
 3 files changed, 192 insertions(+)
 create mode 100644 doc/guides/sample_app_ug/eventdev_pipeline_sw_pmd.rst

diff --git a/MAINTAINERS b/MAINTAINERS
index 860621a..4479906 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -580,6 +580,7 @@ F: drivers/event/sw/
 F: test/test/test_eventdev_sw.c
 F: doc/guides/eventdevs/sw.rst
 F: examples/eventdev_pipeline_sw_pmd/
+F: doc/guides/sample_app_ug/eventdev_pipeline_sw_pmd.rst
 
 NXP DPAA2 Eventdev PMD
 M: Hemant Agrawal <hemant.agrawal at nxp.com>
diff --git a/doc/guides/sample_app_ug/eventdev_pipeline_sw_pmd.rst b/doc/guides/sample_app_ug/eventdev_pipeline_sw_pmd.rst
new file mode 100644
index 0000000..b1b18dd
--- /dev/null
+++ b/doc/guides/sample_app_ug/eventdev_pipeline_sw_pmd.rst
@@ -0,0 +1,190 @@
+
+..  BSD LICENSE
+    Copyright(c) 2017 Intel Corporation. All rights reserved.
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Eventdev Pipeline SW PMD Sample Application
+===========================================
+
+The eventdev pipeline sample application is a sample app that demonstrates
+the usage of the eventdev API using the software PMD. It shows how an
+application can configure a pipeline and assign a set of worker cores to
+perform the processing required.
+
+The application has a range of command line arguments allowing it to be
+configured for various numbers worker cores, stages,queue depths and cycles per
+stage of work. This is useful for performance testing as well as quickly testing
+a particular pipeline configuration.
+
+
+Compiling the Application
+-------------------------
+
+To compile the application:
+
+#.  Go to the sample application directory:
+
+    .. code-block:: console
+
+        export RTE_SDK=/path/to/rte_sdk
+        cd ${RTE_SDK}/examples/eventdev_pipeline_sw_pmd
+
+#.  Set the target (a default target is used if not specified). For example:
+
+    .. code-block:: console
+
+        export RTE_TARGET=x86_64-native-linuxapp-gcc
+
+    See the *DPDK Getting Started Guide* for possible RTE_TARGET values.
+
+#.  Build the application:
+
+    .. code-block:: console
+
+        make
+
+Running the Application
+-----------------------
+
+The application has a lot of command line options. This allows specification of
+the eventdev PMD to use, and a number of attributes of the processing pipeline
+options.
+
+An example eventdev pipeline running with the software eventdev PMD using
+these settings is shown below:
+
+ * ``-r1``: core mask 0x1 for RX
+ * ``-t1``: core mask 0x1 for TX
+ * ``-e4``: core mask 0x4 for the software scheduler
+ * ``-w FF00``: core mask for worker cores, 8 cores from 8th to 16th
+ * ``-s4``: 4 atomic stages
+ * ``-n0``: process infinite packets (run forever)
+ * ``-c32``: worker dequeue depth of 32
+ * ``-W1000``: do 1000 cycles of work per packet in each stage
+ * ``-D``: dump statistics on exit
+
+.. code-block:: console
+
+    ./build/eventdev_pipeline_sw_pmd --vdev event_sw0 -- -r1 -t1 -e4 -w FF00 -s4 -n0 -c32 -W1000 -D
+
+The application has some sanity checking built-in, so if there is a function
+(eg; the RX core) which doesn't have a cpu core mask assigned, the application
+will print an error message:
+
+.. code-block:: console
+
+  Core part of pipeline was not assigned any cores. This will stall the
+  pipeline, please check core masks (use -h for details on setting core masks):
+          rx: 0
+          tx: 1
+
+Configuration of the eventdev is covered in detail in the programmers guide,
+see the Event Device Library section.
+
+
+Observing the Application
+-------------------------
+
+At runtime the eventdev pipeline application prints out a summary of the
+configuration, and some runtime statistics like packets per second. On exit the
+worker statistics are printed, along with a full dump of the PMD statistics if
+required. The following sections show sample output for each of the output
+types.
+
+Configuration
+~~~~~~~~~~~~~
+
+This provides an overview of the pipeline,
+scheduling type at each stage, and parameters to options such as how many
+flows to use and what eventdev PMD is in use. See the following sample output
+for details:
+
+.. code-block:: console
+
+  Config:
+        ports: 2
+        workers: 8
+        packets: 0
+        priorities: 1
+        Queue-prio: 0
+        qid0 type: atomic
+        Cores available: 44
+        Cores used: 10
+        Eventdev 0: event_sw
+  Stages:
+        Stage 0, Type Atomic    Priority = 128
+        Stage 1, Type Atomic    Priority = 128
+        Stage 2, Type Atomic    Priority = 128
+        Stage 3, Type Atomic    Priority = 128
+
+Runtime
+~~~~~~~
+
+At runtime, the statistics of the consumer are printed, stating the number of
+packets received, runtime in milliseconds, average mpps, and current mpps.
+
+.. code-block:: console
+
+  # consumer RX= xxxxxxx, time yyyy ms, avg z.zzz mpps [current w.www mpps]
+
+Shutdown
+~~~~~~~~
+
+At shutdown, the application prints the number of packets received and
+transmitted, and an overview of the distribution of work across worker cores.
+
+.. code-block:: console
+
+        Signal 2 received, preparing to exit...
+          worker 12 thread done. RX=4966581 TX=4966581
+          worker 13 thread done. RX=4963329 TX=4963329
+          worker 14 thread done. RX=4953614 TX=4953614
+          worker 0 thread done. RX=0 TX=0
+          worker 11 thread done. RX=4970549 TX=4970549
+          worker 10 thread done. RX=4986391 TX=4986391
+          worker 9 thread done. RX=4970528 TX=4970528
+          worker 15 thread done. RX=4974087 TX=4974087
+          worker 8 thread done. RX=4979908 TX=4979908
+          worker 2 thread done. RX=0 TX=0
+
+        Port Workload distribution:
+        worker 0 :      12.5 % (4979876 pkts)
+        worker 1 :      12.5 % (4970497 pkts)
+        worker 2 :      12.5 % (4986359 pkts)
+        worker 3 :      12.5 % (4970517 pkts)
+        worker 4 :      12.5 % (4966566 pkts)
+        worker 5 :      12.5 % (4963297 pkts)
+        worker 6 :      12.5 % (4953598 pkts)
+        worker 7 :      12.5 % (4974055 pkts)
+
+To get a full dump of the state of the eventdev PMD, pass the ``-D`` flag to
+this application. When the app is terminated using ``Ctrl+C``, the
+``rte_event_dev_dump()`` function is called, resulting in a dump of the
+statistics that the PMD provides. The statistics provided depend on the PMD
+used, see the Event Device Drivers section for a list of eventdev PMDs.
diff --git a/doc/guides/sample_app_ug/index.rst b/doc/guides/sample_app_ug/index.rst
index 02611ef..f9239e3 100644
--- a/doc/guides/sample_app_ug/index.rst
+++ b/doc/guides/sample_app_ug/index.rst
@@ -69,6 +69,7 @@ Sample Applications User Guides
     netmap_compatibility
     ip_pipeline
     test_pipeline
+    eventdev_pipeline_sw_pmd
     dist_app
     vm_power_management
     tep_termination
-- 
2.7.4



More information about the dev mailing list