[dpdk-dev] [PATCH] net/mlx5: fix TSO segment size

[Nélio Laranjeiro]

On Tue, Jun 20, 2017 at 08:24:47AM +0300, Shahaf Shuler wrote:
> In case on multi segment packet, the TSO segment size
> was taken from the last segment. This may lead to incorrect
> values in case not all segments are initialized with the field.
> 
> Fixing it by taking the value from the first segment.
> 
> Fixes: 3f13f8c23a7c ("net/mlx5: support hardware TSO")
> Cc: stable at dpdk.org
> 
> Signed-off-by: Shahaf Shuler <shahafs at mellanox.com>
> Acked-by: Yongseok Koh <yskoh at mellanox.com>
> ---
>  drivers/net/mlx5/mlx5_rxtx.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
> index cade625f9..70314b393 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.c
> +++ b/drivers/net/mlx5/mlx5_rxtx.c
> @@ -527,6 +527,7 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
>  		uint16_t ehdr;
>  		uint8_t cs_flags = 0;
>  		uint64_t tso = 0;
> +		uint16_t tso_segsz = 0;
>  #ifdef MLX5_PMD_SOFT_COUNTERS
>  		uint32_t total_length = 0;
>  #endif
> @@ -622,6 +623,7 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
>  
>  				tso_header_sz = buf->l2_len + vlan_sz +
>  						buf->l3_len + buf->l4_len;
> +				tso_segsz = buf->tso_segsz;
>  
>  				if (is_tunneled	&& txq->tunnel_en) {
>  					tso_header_sz += buf->outer_l2_len +
> @@ -821,7 +823,7 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
>  			};
>  			wqe->eseg = (rte_v128u32_t){
>  				0,
> -				cs_flags | (htons(buf->tso_segsz) << 16),
> +				cs_flags | (htons(tso_segsz) << 16),
>  				0,
>  				(ehdr << 16) | htons(tso_header_sz),
>  			};
> -- 
> 2.12.0

Acked-by: Nelio Laranjeiro <nelio.laranjeiro at 6wind.com>

-- 
Nélio Laranjeiro
6WIND