[dpdk-dev] [PATCH 22/22] cryptodev: remove AAD from authentication structure

Pablo de Lara pablo.de.lara.guarch at intel.com
Wed Jun 21 09:47:31 CEST 2017


Now that AAD is only used in AEAD algorithms,
there is no need to keep AAD in the authentication
structure.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch at intel.com>
---
 app/test-crypto-perf/cperf_ops.c         |  2 --
 drivers/crypto/openssl/rte_openssl_pmd.c |  1 -
 lib/librte_cryptodev/rte_crypto_sym.h    | 24 ------------------------
 test/test/test_cryptodev.c               |  4 ----
 test/test/test_cryptodev_perf.c          |  1 -
 5 files changed, 32 deletions(-)

diff --git a/app/test-crypto-perf/cperf_ops.c b/app/test-crypto-perf/cperf_ops.c
index a76ad8c..1076ef8 100644
--- a/app/test-crypto-perf/cperf_ops.c
+++ b/app/test-crypto-perf/cperf_ops.c
@@ -394,7 +394,6 @@ cperf_create_session(uint8_t dev_id,
 					test_vector->auth_iv.length;
 		} else {
 			auth_xform.auth.digest_length = 0;
-			auth_xform.auth.add_auth_data_length = 0;
 			auth_xform.auth.key.length = 0;
 			auth_xform.auth.key.data = NULL;
 			auth_xform.auth.iv.length = 0;
@@ -447,7 +446,6 @@ cperf_create_session(uint8_t dev_id,
 					test_vector->auth_key.data;
 		} else {
 			auth_xform.auth.digest_length = 0;
-			auth_xform.auth.add_auth_data_length = 0;
 			auth_xform.auth.key.length = 0;
 			auth_xform.auth.key.data = NULL;
 			auth_xform.auth.iv.length = 0;
diff --git a/drivers/crypto/openssl/rte_openssl_pmd.c b/drivers/crypto/openssl/rte_openssl_pmd.c
index a33c36e..e08eb5f 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd.c
@@ -412,7 +412,6 @@ openssl_set_session_auth_parameters(struct openssl_session *sess,
 		return -EINVAL;
 	}
 
-	sess->auth.aad_length = xform->auth.add_auth_data_length;
 	sess->auth.digest_length = xform->auth.digest_length;
 
 	return 0;
diff --git a/lib/librte_cryptodev/rte_crypto_sym.h b/lib/librte_cryptodev/rte_crypto_sym.h
index 9d9592e..4f49119 100644
--- a/lib/librte_cryptodev/rte_crypto_sym.h
+++ b/lib/librte_cryptodev/rte_crypto_sym.h
@@ -326,13 +326,6 @@ struct rte_crypto_auth_xform {
 	 * the result shall be truncated.
 	 */
 
-	uint16_t add_auth_data_length;
-	/**< The length of the additional authenticated data (AAD) in bytes.
-	 * The maximum permitted value is 65535 (2^16 - 1) bytes, unless
-	 * otherwise specified below.
-	 *
-	 */
-
 	struct {
 		uint16_t offset;
 		/**< Starting point for Initialisation Vector or Counter,
@@ -644,23 +637,6 @@ struct rte_crypto_sym_op {
 					phys_addr_t phys_addr;
 					/**< Physical address of digest */
 				} digest; /**< Digest parameters */
-
-				struct {
-					uint8_t *data;
-					/**< Pointer to Additional Authenticated Data (AAD)
-					 * needed for authenticated cipher mechanisms (CCM and
-					 * GCM).
-					 *
-					 * The length of the data pointed to by this field is
-					 * set up for the session in the @ref
-					 * rte_crypto_auth_xform structure as part of the @ref
-					 * rte_cryptodev_sym_session_create function call.
-					 * This length must not exceed 65535 (2^16-1) bytes.
-					 *
-					 */
-					phys_addr_t phys_addr;	/**< physical address */
-				} aad;
-				/**< Additional authentication parameters */
 			} auth;
 		};
 	};
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index 77407f7..e1f7105 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -5531,7 +5531,6 @@ static int MD5_HMAC_create_session(struct crypto_testsuite_params *ts_params,
 	ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_MD5_HMAC;
 
 	ut_params->auth_xform.auth.digest_length = MD5_DIGEST_LEN;
-	ut_params->auth_xform.auth.add_auth_data_length = 0;
 	ut_params->auth_xform.auth.key.length = test_case->key.len;
 	ut_params->auth_xform.auth.key.data = key;
 
@@ -6304,7 +6303,6 @@ static int create_gmac_session(uint8_t dev_id,
 	ut_params->auth_xform.auth.algo = RTE_CRYPTO_AUTH_AES_GMAC;
 	ut_params->auth_xform.auth.op = auth_op;
 	ut_params->auth_xform.auth.digest_length = tdata->gmac_tag.len;
-	ut_params->auth_xform.auth.add_auth_data_length = 0;
 	ut_params->auth_xform.auth.key.length = tdata->key.len;
 	ut_params->auth_xform.auth.key.data = auth_key;
 	ut_params->auth_xform.auth.iv.offset = IV_OFFSET;
@@ -6684,7 +6682,6 @@ create_auth_session(struct crypto_unittest_params *ut_params,
 	ut_params->auth_xform.auth.key.length = reference->auth_key.len;
 	ut_params->auth_xform.auth.key.data = auth_key;
 	ut_params->auth_xform.auth.digest_length = reference->digest.len;
-	ut_params->auth_xform.auth.add_auth_data_length = reference->aad.len;
 
 	/* Create Crypto session*/
 	ut_params->sess = rte_cryptodev_sym_session_create(dev_id,
@@ -6722,7 +6719,6 @@ create_auth_cipher_session(struct crypto_unittest_params *ut_params,
 		ut_params->auth_xform.auth.iv.length = reference->iv.len;
 	} else {
 		ut_params->auth_xform.next = &ut_params->cipher_xform;
-		ut_params->auth_xform.auth.add_auth_data_length = reference->aad.len;
 
 		/* Setup Cipher Parameters */
 		ut_params->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
diff --git a/test/test/test_cryptodev_perf.c b/test/test/test_cryptodev_perf.c
index 8e9c33a..e938812 100644
--- a/test/test/test_cryptodev_perf.c
+++ b/test/test/test_cryptodev_perf.c
@@ -2936,7 +2936,6 @@ test_perf_set_crypto_op_aes(struct rte_crypto_op *op, struct rte_mbuf *m,
 	if (chain == CIPHER_ONLY) {
 		op->sym->auth.digest.data = NULL;
 		op->sym->auth.digest.phys_addr = 0;
-		op->sym->auth.aad.data = NULL;
 		op->sym->auth.data.offset = 0;
 		op->sym->auth.data.length = 0;
 	} else {
-- 
2.9.4



More information about the dev mailing list