[dpdk-dev] [PATCH v11 7/7] app/test-pmd: add latency statistics calculation

Remy Horton remy.horton at intel.com
Thu Mar 9 17:25:34 CET 2017


From: Harry van Haaren <harry.van.haaren at intel.com>

This patch adds latency stats commandline argument to testpmd,
allowing to specify the lcore to use for latencystats updates.

Signed-off-by: Reshma Pattan <reshma.pattan at intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren at intel.com>
Signed-off-by: Remy Horton <remy.horton at intel.com>
---
 app/test-pmd/parameters.c | 20 +++++++++++++++++++-
 app/test-pmd/testpmd.c    | 37 +++++++++++++++++++++++++++++++++++++
 app/test-pmd/testpmd.h    |  6 +++++-
 3 files changed, 61 insertions(+), 2 deletions(-)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 28db8cd..30b60ba 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -149,6 +149,10 @@ usage(char* progname)
 	       "the packet will be enqueued into the rx drop-queue. "
 	       "If the drop-queue doesn't exist, the packet is dropped. "
 	       "By default drop-queue=127.\n");
+#ifdef RTE_LIBRTE_LATENCY_STATS
+	printf("  --latencystats=N: enable latency and jitter statistcs "
+	       "monitoring on lcore id N.\n");
+#endif
 	printf("  --crc-strip: enable CRC stripping by hardware.\n");
 	printf("  --enable-lro: enable large receive offload.\n");
 	printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
@@ -526,6 +530,7 @@ launch_args_parse(int argc, char** argv)
 		{ "pkt-filter-report-hash",     1, 0, 0 },
 		{ "pkt-filter-size",            1, 0, 0 },
 		{ "pkt-filter-drop-queue",      1, 0, 0 },
+		{ "latencystats",               1, 0, 0 },
 		{ "crc-strip",                  0, 0, 0 },
 		{ "enable-lro",                 0, 0, 0 },
 		{ "enable-rx-cksum",            0, 0, 0 },
@@ -766,6 +771,19 @@ launch_args_parse(int argc, char** argv)
 						 "drop queue %d invalid - must"
 						 "be >= 0 \n", n);
 			}
+#ifdef RTE_LIBRTE_LATENCY_STATS
+			if (!strcmp(lgopts[opt_idx].name,
+				    "latencystats")) {
+				n = atoi(optarg);
+				if (n >= 0) {
+					latencystats_lcore_id = (lcoreid_t) n;
+					latencystats_enabled = 1;
+				} else
+					rte_exit(EXIT_FAILURE,
+						 "invalid lcore id %d for latencystats"
+						 " must be >= 0\n", n);
+			}
+#endif
 			if (!strcmp(lgopts[opt_idx].name, "crc-strip"))
 				rx_mode.hw_strip_crc = 1;
 			if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index b31a300..524e758 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -83,6 +83,10 @@
 #ifdef RTE_LIBRTE_BITRATE
 #include <rte_bitrate.h>
 #endif
+#include <rte_metrics.h>
+#ifdef RTE_LIBRTE_LATENCY_STATS
+#include <rte_latencystats.h>
+#endif
 
 #include "testpmd.h"
 
@@ -276,6 +280,20 @@ uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
 
 #endif
 
+#ifdef RTE_LIBRTE_LATENCY_STATS
+
+/*
+ * Set when latency stats is enabled in the commandline
+ */
+uint8_t latencystats_enabled;
+
+/*
+ * Lcore ID to serive latency statistics.
+ */
+lcoreid_t latencystats_lcore_id = -1;
+
+#endif
+
 /*
  * Ethernet device configuration.
  */
@@ -955,6 +973,11 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 			tics_datum = tics_current;
 		}
 #endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+		if (latencystats_lcore_id == rte_lcore_id())
+			rte_latencystats_update();
+#endif
+
 	} while (! fc->stopped);
 }
 
@@ -2108,6 +2131,9 @@ signal_handler(int signum)
 		/* uninitialize packet capture framework */
 		rte_pdump_uninit();
 #endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+		rte_latencystats_uninit();
+#endif
 		force_quit();
 		/* exit with the expected status */
 		signal(signum, SIG_DFL);
@@ -2169,6 +2195,17 @@ main(int argc, char** argv)
 	/* Init metrics library */
 	rte_metrics_init(rte_socket_id());
 
+#ifdef RTE_LIBRTE_LATENCY_STATS
+	if (latencystats_enabled != 0) {
+		int ret = rte_latencystats_init(1, NULL);
+		if (ret)
+			printf("Warning: latencystats init()"
+				" returned error %d\n",	ret);
+		printf("Latencystats running on lcore %d\n",
+			latencystats_lcore_id);
+	}
+#endif
+
 	/* Setup bitrate stats */
 #ifdef RTE_LIBRTE_BITRATE
 	bitrate_data = rte_stats_bitrate_create();
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 8cf2860..f0652ee 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -381,6 +381,10 @@ extern enum dcb_queue_mapping_mode dcb_q_mapping;
 extern uint16_t mbuf_data_size; /**< Mbuf data space size. */
 extern uint32_t param_total_num_mbufs;
 
+
+extern uint8_t latencystats_enabled;
+extern lcoreid_t latencystats_lcore_id;
+
 extern struct rte_fdir_conf fdir_conf;
 
 /*
-- 
2.5.5



More information about the dev mailing list