[dpdk-dev] [PATCH v2 3/3] doc: add support for Intel QAT device D15xx

[Fiona Trahe]

Add instructions for D15xx device to the QAT PMD guide.

Signed-off-by: Fiona Trahe <fiona.trahe at intel.com>
---
 doc/guides/cryptodevs/qat.rst | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 4927a00..897919e 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -36,6 +36,7 @@ hardware accelerator devices:
 * ``Intel QuickAssist Technology DH895xCC``
 * ``Intel QuickAssist Technology C62x``
 * ``Intel QuickAssist Technology C3xxx``
+* ``Intel QuickAssist Technology D15xx``
 
 
 Features
@@ -111,12 +112,15 @@ available kernel drivers and device ids are :
    DH895xCC,4.4+,qat_dh895xcc,dh895xcc,435,1,443,32
    C62x,4.5+,qat_c62x,c6xx,37c8,3,37c9,16
    C3xxx,4.5+,qat_c3xxx,c3xxx,19e2,1,19e3,16
+   D15xx,**,qat_d15xx,d15xx,6f54,1,6f55,16
 
 
 The ``driver`` column indicates either the linux kernel version in which support
 for this device was introduced or a driver available on Intel's 01.org website.
 There are both linux and 01.org kernel drivers available for some devices.
 
+    ** Release to be confirmed.
+
 
 If you are running on a kernel which includes a driver for your device, see
 `Installation using kernel.org driver`_ below. Otherwise see
@@ -308,7 +312,7 @@ the unbind command below::
         done; \
     done
 
-For **Intel(R) QuickAssist Technology C3xxx** device:
+For **Intel(R) QuickAssist Technology C3xxx or D15xx** device:
 
 The unbind command below assumes ``bdfs`` of ``01:01.00-01:02.07``,
 if your VFs are different adjust the unbind command below::
-- 
2.5.0