[dpdk-dev] [PATCH v2 2/2] doc: update PMD options for mlx5
Shahaf Shuler
shahafs at mellanox.com
Wed Mar 15 08:30:36 CET 2017
Saturday, March 11, 2017 1:14 AM, Yongseok Koh:
> Enhanced multi-packet send mode is newly introduced for ConnectX-5
> families of adaptors.
>
> Signed-off-by: Yongseok Koh <yskoh at mellanox.com>
> ---
> doc/guides/nics/mlx5.rst | 31 +++++++++++++++++++++++++++----
> 1 file changed, 27 insertions(+), 4 deletions(-)
>
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index
> 41f3a472e..0783aebdd 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -183,10 +183,17 @@ Run-time configuration
>
> - ``txq_mpw_en`` parameter [int]
>
> - A nonzero value enables multi-packet send. This feature allows the TX
> - burst function to pack up to five packets in two descriptors in order to
> - save PCI bandwidth and improve performance at the cost of a slightly
> - higher CPU usage.
> + A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and
> + enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows
> + the TX burst function to pack up multiple packets in a single
> + descriptor session in order to save PCI bandwidth and improve
> + performance at the cost of a slightly higher CPU usage. When
> + ``txq_inline`` is set along with ``txq_mpw_en``, TX burst function
> + tries to copy entire packet data on to TX descriptor instead of
> + including pointer of packet only if there is enough room remained in
> + the descriptor. ``txq_inline`` sets per-descriptor space for either
> + pointers or inlined packets. In addition, Enhanced MPS supports
> + hybrid mode - mixing inlined packets and pointers in the same descriptor.
>
> This option cannot be used in conjunction with ``tso`` below. When ``tso``
> is set, ``txq_mpw_en`` is disabled.
> @@ -194,6 +201,22 @@ Run-time configuration
> It is currently only supported on the ConnectX-4 Lx and ConnectX-5
> families of adapters. Enabled by default.
>
> +- ``txq_mpw_hdr_dseg_en`` parameter [int]
> +
> + A nonzero value enables including two pointers in the first block of
> + TX descriptor. This can be used to lessen CPU load for memory copy.
> +
> + Effective only when Enhanced MPS is supported. Disabled by default.
> +
> +- ``txq_max_inline_len`` parameter [int]
> +
> + Maximum size of packet to be inlined. This limits the size of packet
> + to be inlined. If the size of a packet is larger than configured
> + value, the packet isn't inlined even though there's enough space
> + remained in the descriptor. Instead, the packet is included with pointer.
> +
> + Effective only when Enhanced MPS is supported. The default value is 256.
> +
> - ``tso`` parameter [int]
>
> A nonzero value enables hardware TSO.
> --
Acked-by: Shahaf Shuler <shahafs at mellanox.com>
> 2.11.0
More information about the dev
mailing list