[dpdk-dev] [PATCH v2 1/3] app/testpmd: add support for MPLS and GRE items
Adrien Mazarguil
adrien.mazarguil at 6wind.com
Thu Mar 23 20:39:28 CET 2017
Hi Beilei,
On Thu, Mar 23, 2017 at 06:57:47PM +0800, Beilei Xing wrote:
> This patch adds sopport for MPLS and GRE items to generic filter
> API.
Besides the typo, my previous comment about the title line still stands
("app/testpmd" is not accurate regarding the intent of this patch).
>
> Signed-off-by: Beilei Xing <beilei.xing at intel.com>
> ---
> app/test-pmd/cmdline_flow.c | 46 +++++++++++++++++++++++++++++
> app/test-pmd/config.c | 2 ++
> doc/guides/prog_guide/rte_flow.rst | 20 +++++++++++--
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 8 +++++
> lib/librte_ether/rte_flow.h | 45 ++++++++++++++++++++++++++++
> 5 files changed, 119 insertions(+), 2 deletions(-)
>
> diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
> index ff98690..ff1e47c 100644
> --- a/app/test-pmd/cmdline_flow.c
> +++ b/app/test-pmd/cmdline_flow.c
> @@ -159,6 +159,10 @@ enum index {
> ITEM_SCTP_CKSUM,
> ITEM_VXLAN,
> ITEM_VXLAN_VNI,
> + ITEM_MPLS,
> + ITEM_MPLS_LABEL,
> + ITEM_GRE,
> + ITEM_GRE_PROTO,
>
> /* Validate/create actions. */
> ACTIONS,
> @@ -432,6 +436,8 @@ static const enum index next_item[] = {
> ITEM_TCP,
> ITEM_SCTP,
> ITEM_VXLAN,
> + ITEM_MPLS,
> + ITEM_GRE,
> ZERO,
> };
>
> @@ -538,6 +544,18 @@ static const enum index item_vxlan[] = {
> ZERO,
> };
>
> +static const enum index item_mpls[] = {
> + ITEM_MPLS_LABEL,
> + ITEM_NEXT,
> + ZERO,
> +};
> +
> +static const enum index item_gre[] = {
> + ITEM_GRE_PROTO,
> + ITEM_NEXT,
> + ZERO,
> +};
> +
> static const enum index next_action[] = {
> ACTION_END,
> ACTION_VOID,
> @@ -1279,6 +1297,34 @@ static const struct token token_list[] = {
> .next = NEXT(item_vxlan, NEXT_ENTRY(UNSIGNED), item_param),
> .args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_vxlan, vni)),
> },
> + [ITEM_MPLS] = {
> + .name = "mpls",
> + .help = "match MPLS header",
> + .priv = PRIV_ITEM(MPLS, sizeof(struct rte_flow_item_mpls)),
> + .next = NEXT(item_mpls),
> + .call = parse_vc,
> + },
> + [ITEM_MPLS_LABEL] = {
> + .name = "label",
I didn't catch this during my previous review, naming it "label" is wrong
because users will actually specify the entire "label_tc_s_ttl" field at
once.
If you really want to name it "label" with the intent of only assigning the
initial 20b, have a look at ITEM_IPV6_TC and ITEM_IPV6_FLOW entries in the
same array.
> + .help = "MPLS label",
> + .next = NEXT(item_mpls, NEXT_ENTRY(UNSIGNED), item_param),
> + .args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_mpls,
> + label_tc_s_ttl)),
> + },
> + [ITEM_GRE] = {
> + .name = "gre",
> + .help = "match GRE header",
> + .priv = PRIV_ITEM(GRE, sizeof(struct rte_flow_item_gre)),
> + .next = NEXT(item_gre),
> + .call = parse_vc,
> + },
> + [ITEM_GRE_PROTO] = {
> + .name = "protocol",
> + .help = "GRE protocol type",
> + .next = NEXT(item_gre, NEXT_ENTRY(UNSIGNED), item_param),
> + .args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gre,
> + protocol)),
> + },
> /* Validate/create actions. */
> [ACTIONS] = {
> .name = "actions",
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index eb3d572..90d153e 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -963,6 +963,8 @@ static const struct {
> MK_FLOW_ITEM(TCP, sizeof(struct rte_flow_item_tcp)),
> MK_FLOW_ITEM(SCTP, sizeof(struct rte_flow_item_sctp)),
> MK_FLOW_ITEM(VXLAN, sizeof(struct rte_flow_item_vxlan)),
> + MK_FLOW_ITEM(MPLS, sizeof(struct rte_flow_item_mpls)),
> + MK_FLOW_ITEM(GRE, sizeof(struct rte_flow_item_gre)),
> };
>
> /** Compute storage space needed by item specification. */
> diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
> index 3bf8871..45897cd 100644
> --- a/doc/guides/prog_guide/rte_flow.rst
> +++ b/doc/guides/prog_guide/rte_flow.rst
> @@ -187,8 +187,8 @@ Pattern item
> Pattern items fall in two categories:
>
> - Matching protocol headers and packet data (ANY, RAW, ETH, VLAN, IPV4,
> - IPV6, ICMP, UDP, TCP, SCTP, VXLAN and so on), usually associated with a
> - specification structure.
> + IPV6, ICMP, UDP, TCP, SCTP, VXLAN, MPLS, GRE and so on), usually
> + associated with a specification structure.
>
> - Matching meta-data or affecting pattern processing (END, VOID, INVERT, PF,
> VF, PORT and so on), often without a specification structure.
> @@ -863,6 +863,22 @@ Matches a VXLAN header (RFC 7348).
> - ``rsvd1``: reserved, normally 0x00.
> - Default ``mask`` matches VNI only.
>
> +Item: ``MPLS``
> +^^^^^^^^^^^^^^
> +
> +Matches a MPLS header.
> +
> +- ``label_tc_s_ttl``: Lable, TC, Bottom of Stack and TTL.
Typo, "Lable". Also a minor comment, this word should be lower case since it
comes after a colon.
> +- Default ``mask`` matches label only.
> +
> +Item: ``GRE``
> +^^^^^^^^^^^^^^
> +
> +Matches a GRE header.
> +
> +- ``c_rsvd0_ver``: Checksum, reserved 0 and version.
> +- ``protocol``: Protocol type.
"Checksum" and "Protocol" should be lower case.
You must define a default mask as well.
> +[
> Actions
> ~~~~~~~
>
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index bdc6a14..f9fa5d6 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -2453,6 +2453,14 @@ This section lists supported pattern items and their attributes, if any.
>
> - ``vni {unsigned}``: VXLAN identifier.
>
> +- ``mpls``: match MPLS header.
> +
> + - ``label {unsigned}``: MPLS label.
> +
> +- ``gre``: match GRE header.
> +
> + - ``protocol {unsigned}``: Protocol type.
> +
Indentation issue, also "Protocol" should be lower case.
> Actions list
> ^^^^^^^^^^^^
>
> diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
> index 171a569..f855090 100644
> --- a/lib/librte_ether/rte_flow.h
> +++ b/lib/librte_ether/rte_flow.h
> @@ -282,6 +282,20 @@ enum rte_flow_item_type {
> * See struct rte_flow_item_nvgre.
> */
> RTE_FLOW_ITEM_TYPE_NVGRE,
> +
> + /**
> + * Matches a MPLS header.
> + *
> + * See struct rte_flow_item_mpls.
> + */
> + RTE_FLOW_ITEM_TYPE_MPLS,
> +
> + /**
> + * Matches a GRE header.
> + *
> + * See struct rte_flow_item_gre.
> + */
> + RTE_FLOW_ITEM_TYPE_GRE,
> };
>
> /**
> @@ -599,6 +613,37 @@ struct rte_flow_item_nvgre {
> };
>
> /**
> + * RTE_FLOW_ITEM_TYPE_MPLS.
> + *
> + * Matches a MPLS header.
> + */
> +struct rte_flow_item_mpls {
> + /**
> + * Lable (20b), TC (3b), Bottom of Stack (1b), TTL (8b).
Typo, "Lable".
> + */
> + uint32_t label_tc_s_ttl;
> +};
> +
> +/** Default mask for RTE_FLOW_ITEM_TYPE_MPLS. */
> +static const struct rte_flow_item_mpls rte_flow_item_mpls_mask = {
> + .label_tc_s_ttl = 0xfffff,
> +};
This default mask is wrong, it has to be specified in network order (you can
include rte_byteorder.h if you need some #ifdef).
> +
> +/**
> + * RTE_FLOW_ITEM_TYPE_GRE.
> + *
> + * Matches a GRE header.
> + */
> +struct rte_flow_item_gre {
> + /**
> + * Checksum (1b), reserved 0 (12b), version (3b).
> + * Refer to RFC 2784.
> + */
> + uint16_t c_rsvd0_ver;
> + uint16_t protocol; /**< Protocol type. */
> +};
Default mask is missing, you must add one.
> +
> +/**
> * Matching pattern item definition.
> *
> * A pattern is formed by stacking items starting from the lowest protocol
> --
> 2.5.5
>
--
Adrien Mazarguil
6WIND
More information about the dev
mailing list