[dpdk-dev] [PATCH v3 00/61] net/qede/base: qede PMD enhancements

Ferruh Yigit ferruh.yigit at intel.com
Fri Mar 24 12:08:01 CET 2017

On 3/24/2017 7:27 AM, Rasesh Mody wrote:
> Hi Ferruh,
> This patch set adds support for new firmware, new features and
> bug fixes.
> Please apply to dpdk-net-next for 17.05 release.
> v1..v3
>  - address all the review comments received so far including addressal of
>    clang and 32-bit compilation errors.
> Thanks!
> Rasesh
> Harish Patil (3):
>   net/qede/base: add support for arfs mode
>   net/qede: add ntuple and flow director filter support
>   net/qede: add LRO/TSO offloads support
> Rasesh Mody (58):
>   net/qede/base: return an initialized return value
>   net/qede/base: send FW version driver state to MFW
>   net/qede/base: mask Rx buffer attention bits
>   net/qede/base: print various indication on Tx-timeouts
>   net/qede/base: utilize FW
>   net/qede: upgrade the FW to
>   net/qede/base: decrease maximum HW func per device
>   net/qede/base: move mask constants defining NIC type
>   net/qede/base: remove attribute from update current config
>   net/qede/base: add nvram options
>   net/qede/base: add comment
>   net/qede/base: use default MTU from shared memory
>   net/qede/base: change queue/sb-id from 8 bit to 16 bit
>   net/qede/base: update MFW when default MTU is changed
>   net/qede/base: prevent device init failure
>   net/qede/base: read card personality via MFW commands
>   net/qede/base: allow probe to succeed with minor HW-issues
>   net/qede/base: remove unneeded step in HW init
>   net/qede/base: allow only trusted VFs to be promisc
>   net/qede/base: qm initialization revamp
>   net/qede/base: print firmware MFW and MBI versions
>   net/qede/base: check active VF queues before stopping
>   net/qede/base: set driver type before sending load request
>   net/qede/base: prevent driver laod with invalid resources
>   net/qede/base: add interfaces for MFW TLV request processing
>   net/qede/base: code refactoring of SP queues
>   net/qede/base: make L2 queues handle based
>   net/qede/base: add support for handling TLV request from MFW
>   net/qede/base: optimize cache-line access
>   net/qede/base: infrastructure changes for VF tunnelling
>   net/qede/base: revise tunnel APIs/structs
>   net/qede/base: add tunnelling support for VFs
>   net/qede/base: formatting changes
>   net/qede/base: prevent transmitter stuck condition
>   net/qede/base: add mask/shift defines for resource command
>   net/qede/base: add API for using MFW resource lock
>   net/qede/base: remove clock slowdown option
>   net/qede/base: add new image types
>   net/qede/base: use L2-handles for RSS configuration
>   net/qede/base: change valloc to vzalloc
>   net/qede/base: add support for previous driver unload
>   net/qede/base: add non-L2 dcbx tlv application support
>   net/qede/base: update bulletin board during VF init
>   net/qede/base: add coalescing support for VFs
>   net/qede/base: add macro got resource value message
>   net/qede/base: add mailbox for resource allocation
>   net/qede/base: add macro for unsupported command
>   net/qede/base: set max values for soft resoruces
>   net/qede/base: add return code check
>   net/qede/base: zero out MFW mailbox data
>   net/qede/base: move code bits
>   net/qede/base: add PF parameter
>   net/qede/base: allow PMD to control vport and RSS engine ids
>   net/qede/base: add udp ports in bulletin board message
>   net/qede/base: prevent DMAE transactions during recovery
>   net/qede/base: multi-Txq support on same queue-zone for VFs
>   net/qede/base: prevent race condition during unload
>   net/qede/base: semantic changes

Can you also check following commit log spellings [1] for next version,

--->  net/qede/base: allow PMD to control vport and RSS engine ids

--->  net/qede/base: set max values for soft resoruces

--->  net/qede/base: add macro for unsupported command

--->  net/qede/base: prevent driver laod with invalid resources

More information about the dev mailing list