[dpdk-dev] [PATCH] net/ixgbe: fix build on gcc 4.5.1

[Radu Nicolau]

Fixes: 9a0752f498d2 ("net/ixgbe: enable inline IPsec")

Signed-off-by: Radu Nicolau <radu.nicolau at intel.com>
---
 drivers/net/ixgbe/ixgbe_ipsec.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ipsec.c b/drivers/net/ixgbe/ixgbe_ipsec.c
index 99c0a73..105da11 100644
--- a/drivers/net/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ixgbe/ixgbe_ipsec.c
@@ -576,48 +576,48 @@ ixgbe_crypto_capabilities_get(void *device __rte_unused)
 		{ /* IPsec Inline Crypto ESP Transport Egress */
 			.action = RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO,
 			.protocol = RTE_SECURITY_PROTOCOL_IPSEC,
-			.ipsec = {
+			{.ipsec = {
 				.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
 				.mode = RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
 				.direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
 				.options = { 0 }
-			},
+			} },
 			.crypto_capabilities = aes_gcm_gmac_crypto_capabilities,
 			.ol_flags = RTE_SECURITY_TX_OLOAD_NEED_MDATA
 		},
 		{ /* IPsec Inline Crypto ESP Transport Ingress */
 			.action = RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO,
 			.protocol = RTE_SECURITY_PROTOCOL_IPSEC,
-			.ipsec = {
+			{.ipsec = {
 				.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
 				.mode = RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
 				.direction = RTE_SECURITY_IPSEC_SA_DIR_INGRESS,
 				.options = { 0 }
-			},
+			} },
 			.crypto_capabilities = aes_gcm_gmac_crypto_capabilities,
 			.ol_flags = 0
 		},
 		{ /* IPsec Inline Crypto ESP Tunnel Egress */
 			.action = RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO,
 			.protocol = RTE_SECURITY_PROTOCOL_IPSEC,
-			.ipsec = {
+			{.ipsec = {
 				.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
 				.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
 				.direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
 				.options = { 0 }
-			},
+			} },
 			.crypto_capabilities = aes_gcm_gmac_crypto_capabilities,
 			.ol_flags = RTE_SECURITY_TX_OLOAD_NEED_MDATA
 		},
 		{ /* IPsec Inline Crypto ESP Tunnel Ingress */
 			.action = RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO,
 			.protocol = RTE_SECURITY_PROTOCOL_IPSEC,
-			.ipsec = {
+			{.ipsec = {
 				.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
 				.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
 				.direction = RTE_SECURITY_IPSEC_SA_DIR_INGRESS,
 				.options = { 0 }
-			},
+			} },
 			.crypto_capabilities = aes_gcm_gmac_crypto_capabilities,
 			.ol_flags = 0
 		},
-- 
2.7.5