[dpdk-dev] [PATCH] testpmd: add nanosleep in main loop

Ananyev, Konstantin konstantin.ananyev at intel.com
Mon Nov 13 00:14:35 CET 2017



> -----Original Message-----
> From: Marcelo Tosatti [mailto:mtosatti at redhat.com]
> Sent: Saturday, November 11, 2017 3:50 AM
> To: Ananyev, Konstantin <konstantin.ananyev at intel.com>
> Cc: Adrien Mazarguil <adrien.mazarguil at 6wind.com>; dev at dpdk.org; Luiz Capitulino <lcapitulino at redhat.com>; Daniel Bristot de Oliveira
> <bristot at redhat.com>
> Subject: Re: [dpdk-dev] [PATCH] testpmd: add nanosleep in main loop
> 
> On Fri, Nov 10, 2017 at 10:14:23AM +0000, Ananyev, Konstantin wrote:
> >
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Adrien Mazarguil
> > > Sent: Friday, November 10, 2017 9:12 AM
> > > To: Marcelo Tosatti <mtosatti at redhat.com>
> > > Cc: dev at dpdk.org; Luiz Capitulino <lcapitulino at redhat.com>; Daniel Bristot de Oliveira <bristot at redhat.com>
> > > Subject: Re: [dpdk-dev] [PATCH] testpmd: add nanosleep in main loop
> > >
> > > Hi Marcelo,
> > >
> > > On Fri, Nov 10, 2017 at 04:02:10AM -0200, Marcelo Tosatti wrote:
> > > >
> > > > This patch allows a configurable pair of values to be set, which
> > > > controls
> > > > the frequency and length of a nanosleep call performed at test-pmd's
> > > > iofwd main loop.
> > > >
> > > > The problem is the following: it is necessary to execute code
> > > > on isolated CPUs which is not part of the packet forwarding load.
> > > >
> > > > For example:
> > > >
> > > >  "echo val > /sys/kernel/debug/tracing/buffer_size_kb"
> > > >
> > > > hangs the process, because the DPDK thread has higher
> > > > priority than the workqueue thread which executes the flush from
> > > > CPU local tracebuffer to CPU global trace buffer [the workitem
> > > > in case].
> > > >
> > > > There are more serious issues than the trace-cmd bug, such as XFS
> > > > workitems failing to execute causing filesystem corruption.
> > > >
> > > > To workaround this problem, until a proper kernel
> > > > solution is developed, allow DPDK to nanosleep
> > > > (hopefully with a small enough frequency and interval
> > > > so that the performance is within acceptable levels).
> > >
> > > I understand the need to do something about it, however the nanosleep()
> > > approach seems questionable to me.
> > >
> > > Testpmd's forwarding modes (particularly I/O) are used for benchmarking
> > > purposes by many and are therefore sensitive to change. This code path is
> > > currently free from system calls for that reason and nanosleep() is an
> > > expensive one by definition. Even if optional or called at a low frequency,
> > > the presence of this new code has an impact.
> > >
> > > Since testpmd is a development tool not supposed to run in a production
> > > environment, is there really a need for it to be patched to work around a
> > > (temporary) Linux kernel bug?
> > >
> > > If so, why is I/O the only forwarding mode impacted?
> > >
> > > If it's used in a production environment and such a fix can't wait, have
> > > other workarounds been considered:
> > >
> > > - Replacing testpmd in I/O mode with a physical cable or switch?
> > >
> > > - Using proper options on the kernel command line as described in [1], such
> > >   as isolcpus, rcu_nocbs, nohz_full?
> > >
> > > [1] doc/guides/howto/pvp_reference_benchmark.rst
> >
> >
> > Agree with Adrian here - the patch doesn't fix the problem in any case,
> 
> It does fix the problem as the original message describes the testing.

If the user will run testpmd with different fwd mode
(macfwd, csum, txonly, etc.) - he would hit exactly the same problem.
If the user would run any other of DPDK sample applications (l2fwd, l3fwd, etc.) -
he would hit the same problem again.
If some of DPDK customers have a busy loop inside their production system -
they would hit that problem too.
As I understand - that problem is even not DPDK related - any application that uses
busy loop inside can be affected.
Correct?
So I think the patch doesn't fix the problem, all it does - helps to avoid
particular manifestation of it.

BTW, if it is a generic kernel problem - I suppose there should be some 
record in kernel bugzilla to track it, right?
If so, could you probably provide some reference to it? 

>From other side - testpmd is not a production app - 
as the name implies it is a tool to test PMDs functionality and performance.
Specially iofwd  is sort of synthetic benchmark that allows to measure
highest possible PMD performance.
That's why I think many people (and me too) would prefer to keep it intact
and free from any system calls.
   
If you are that desperate to provide some workaround sepcially for testpmd -
my suggestion would be to introduce new fwd mode here that would call
nanosleep() periodically, while keeping original iofwd mode intact. 

> 
> > while introducing an unnecessary slowdown in testpmd iofwd mode.
> 
> It is not unnecessary: it is a mandatory slowdown for any approach
> which fixes the problem, whether it's in DPDK or not.

dpdk runs on other OSes too (freebsd).
For non-linux users it definetly looks like an unnecessary one. 

> 
> > Please think up some other approach.
> > Konstantin
> 
> What characteristics are you looking for in "some other approach"?
> That DPDK is not interrupted? Impossible.

Even if it has to be interrupted - why this can't be done transparently to the user?
Via some high-priority kernel thread/interrupt or so?  

> 
> See, the thing here is that nanosleep length and frequency are
> controllable, which allows an application developer to tune the values
> _and_ still meet their performance metrics.

Honestly, I can't see how you can force each and every application developer
to start injecting nanosleep() into every busy loop inside their applications.
Not to mention already existing legacy apps.

Konstantin

> 
> I would rather be interested in a robust system (which allows certain
> maintenance tasks to execute on isolated CPUs) with deterministic
> performance meeting defined goals rather than "maximum performance"
> (which is completly meaningless other than for marketing purposes).


> 
> 
> > > > The new parameters are:
> > > >
> > > > *  --delay-hz: sets nanosleep frequency in Hz.
> > > > *  --delay-length: sets nanosleep length in ns.
> > > >
> > > > Results for delay-hz=100,delay-length=10000 (which allows
> > > > the buffer_size_kb change to complete):
> > > >
> > > > Baseline run-1:
> > > > [Histogram port 0 to port 1 at rate 2.3 Mpps] Samples: 49505, Average:
> > > > 19008.7 ns, StdDev: 2501.0 ns, Quartiles: 17293.0/18330.0/19901.0 ns
> > > >
> > > > Baseline run-2:
> > > > [Histogram port 0 to port 1 at rate 2.3 Mpps] Samples: 49606, Average:
> > > > 19036.4 ns, StdDev: 2485.2 ns, Quartiles: 17318.0/18349.0/19936.0 ns
> > > >
> > > > Baseline run-3:
> > > > [Histogram port 0 to port 1 at rate 2.3 Mpps] Samples: 49627, Average:
> > > > 19019.2 ns, StdDev: 2503.7 ns, Quartiles: 17323.0/18355.0/19940.0 ns
> > > >
> > > > ============================
> > > >
> > > > (10.000us, 100HZ)
> > > >
> > > > Run-1:
> > > > [Histogram port 0 to port 1 at rate 2.3 Mpps] Samples: 7284, Average:
> > > > 20830.6 ns, StdDev: 12023.0 ns, Quartiles: 17309.0/18394.0/20233.0 ns
> > > >
> > > > Run-2:
> > > > [Histogram port 0 to port 1 at rate 2.3 Mpps] Samples: 6272, Average:
> > > > 20897.1 ns, StdDev: 12057.2 ns, Quartiles: 17389.0/18457.0/20266.0 ns
> > > >
> > > > Run-3:
> > > > [Histogram port 0 to port 1 at rate 2.3 Mpps] Samples: 4843, Average:
> > > > 20535.2 ns, StdDev: 9827.3 ns, Quartiles: 17389.0/18441.0/20269.0 ns
> > > >
> > > >
> > > > Signed-off-by: Marcelo Tosatti <mtosatti at redhat.com>
> > > >
> > > >
> > > > diff -Nur dpdk-17.08.orig/app/test-pmd/iofwd.c dpdk-17.08/app/test-pmd/iofwd.c
> > > > --- dpdk-17.08.orig/app/test-pmd/iofwd.c	2017-10-30 22:45:37.829492673 -0200
> > > > +++ dpdk-17.08/app/test-pmd/iofwd.c	2017-10-30 22:45:48.321522581 -0200
> > > > @@ -64,9 +64,30 @@
> > > >  #include <rte_ethdev.h>
> > > >  #include <rte_string_fns.h>
> > > >  #include <rte_flow.h>
> > > > +#include <time.h>
> > > >
> > > >  #include "testpmd.h"
> > > >
> > > > +uint32_t nanosleep_interval;
> > > > +
> > > > +static void calc_nanosleep_interval(int hz)
> > > > +{
> > > > +	uint64_t cycles_per_sec = rte_get_timer_hz();
> > > > +	nanosleep_interval = cycles_per_sec/hz;
> > > > +}
> > > > +
> > > > +static void do_nanosleep(void)
> > > > +{
> > > > +	struct timespec req;
> > > > +
> > > > +	req.tv_sec = 0;
> > > > +	req.tv_nsec = nanosleep_length;
> > > > +
> > > > +	nanosleep(&req, NULL);
> > > > +
> > > > +	return;
> > > > +}
> > > > +
> > > >  /*
> > > >   * Forwarding of packets in I/O mode.
> > > >   * Forward packets "as-is".
> > > > @@ -81,6 +102,10 @@
> > > >  	uint16_t nb_tx;
> > > >  	uint32_t retry;
> > > >
> > > > +
> > > > +	if (nanosleep_interval == 0 && nanosleep_frequency > 0)
> > > > +		calc_nanosleep_interval(nanosleep_frequency);
> > > > +
> > > >  #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
> > > >  	uint64_t start_tsc;
> > > >  	uint64_t end_tsc;
> > > > @@ -91,6 +116,12 @@
> > > >  	start_tsc = rte_rdtsc();
> > > >  #endif
> > > >
> > > > +	if (nanosleep_frequency > 0 &&
> > > > +	    rte_get_timer_cycles() > fs->next_nanosleep) {
> > > > +		do_nanosleep();
> > > > +		fs->next_nanosleep = rte_get_timer_cycles() + nanosleep_interval;
> > > > +	}
> > > > +
> > > >  	/*
> > > >  	 * Receive a burst of packets and forward them.
> > > >  	 */
> > > > diff -Nur dpdk-17.08.orig/app/test-pmd/parameters.c dpdk-17.08/app/test-pmd/parameters.c
> > > > --- dpdk-17.08.orig/app/test-pmd/parameters.c	2017-10-30 22:45:37.830492676 -0200
> > > > +++ dpdk-17.08/app/test-pmd/parameters.c	2017-10-30 22:46:33.708651912 -0200
> > > > @@ -216,6 +216,8 @@
> > > >  	       "disable print of designated event or all of them.\n");
> > > >  	printf("  --flow-isolate-all: "
> > > >  	       "requests flow API isolated mode on all ports at initialization time.\n");
> > > > +	printf("  --delay-hz: sets nanosleep frequency in Hz.\n");
> > > > +	printf("  --delay-length: sets nanosleep length in ns.\n");
> > > >  }
> > > >
> > > >  #ifdef RTE_LIBRTE_CMDLINE
> > > > @@ -638,7 +640,9 @@
> > > >  		{ "no-rmv-interrupt",		0, 0, 0 },
> > > >  		{ "print-event",		1, 0, 0 },
> > > >  		{ "mask-event",			1, 0, 0 },
> > > > -		{ 0, 0, 0, 0 },
> > > > +		{ "delay-hz",			1, 0, 0 },
> > > > +		{ "delay-length",		1, 0, 0 },
> > > > +	 	{ 0, 0, 0, 0 },
> > > >  	};
> > > >
> > > >  	argvopt = argv;
> > > > @@ -1099,6 +1103,27 @@
> > > >  				else
> > > >  					rte_exit(EXIT_FAILURE, "bad txpkts\n");
> > > >  			}
> > > > +
> > > > +			if (!strcmp(lgopts[opt_idx].name, "delay-hz")) {
> > > > +				int n;
> > > > +
> > > > +				n = atoi(optarg);
> > > > +
> > > > +				if (n < 0)
> > > > +					rte_exit(EXIT_FAILURE, "bad delay-hz\n");
> > > > +				nanosleep_frequency = n;
> > > > +			}
> > > > +
> > > > +			if (!strcmp(lgopts[opt_idx].name, "delay-length")) {
> > > > +				int n;
> > > > +
> > > > +				n = atoi(optarg);
> > > > +
> > > > +				if (n < 0)
> > > > +					rte_exit(EXIT_FAILURE, "bad delay-length\n");
> > > > +				nanosleep_length = n;
> > > > +			}
> > > > +
> > > >  			if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
> > > >  				no_flush_rx = 1;
> > > >  			if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
> > > > diff -Nur dpdk-17.08.orig/app/test-pmd/testpmd.c dpdk-17.08/app/test-pmd/testpmd.c
> > > > --- dpdk-17.08.orig/app/test-pmd/testpmd.c	2017-10-30 22:45:37.829492673 -0200
> > > > +++ dpdk-17.08/app/test-pmd/testpmd.c	2017-10-30 22:45:48.323522591 -0200
> > > > @@ -327,6 +327,13 @@
> > > >
> > > >  #endif
> > > >
> > > > +
> > > > +/* How long to sleep in packet processing */
> > > > +uint32_t nanosleep_length;
> > > > +
> > > > +/* How often to sleep in packet processing */
> > > > +uint32_t nanosleep_frequency;
> > > > +
> > > >  /*
> > > >   * Ethernet device configuration.
> > > >   */
> > > > diff -Nur dpdk-17.08.orig/app/test-pmd/testpmd.h dpdk-17.08/app/test-pmd/testpmd.h
> > > > --- dpdk-17.08.orig/app/test-pmd/testpmd.h	2017-10-30 22:45:37.829492673 -0200
> > > > +++ dpdk-17.08/app/test-pmd/testpmd.h	2017-10-30 22:45:48.323522591 -0200
> > > > @@ -127,6 +127,7 @@
> > > >  	struct pkt_burst_stats rx_burst_stats;
> > > >  	struct pkt_burst_stats tx_burst_stats;
> > > >  #endif
> > > > +	uint64_t next_nanosleep;
> > > >  };
> > > >
> > > >  /** Offload IP checksum in csum forward engine */
> > > > @@ -390,6 +391,9 @@
> > > >  extern lcoreid_t latencystats_lcore_id;
> > > >  #endif
> > > >
> > > > +extern uint32_t nanosleep_length;
> > > > +extern uint32_t nanosleep_frequency;
> > > > +
> > > >  #ifdef RTE_LIBRTE_BITRATE
> > > >  extern lcoreid_t bitrate_lcore_id;
> > > >  extern uint8_t bitrate_enabled;
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > > --
> > > Adrien Mazarguil
> > > 6WIND


More information about the dev mailing list