[dpdk-dev] [PATCH v3 05/12] mbuf: add security crypto flags and mbuf fields
Akhil Goyal
akhil.goyal at nxp.com
Fri Oct 6 20:11:44 CEST 2017
From: Boris Pismenny <borisp at mellanox.com>
Add security crypto flags and update mbuf fields to support
IPsec crypto offload for transmitted packets, and to indicate
crypto result for received packets.
Signed-off-by: Aviad Yehezkel <aviadye at mellanox.com>
Signed-off-by: Boris Pismenny <borisp at mellanox.com>
Signed-off-by: Radu Nicolau <radu.nicolau at intel.com>
---
lib/librte_mbuf/rte_mbuf.c | 6 ++++++
lib/librte_mbuf/rte_mbuf.h | 35 ++++++++++++++++++++++++++++++++---
lib/librte_mbuf/rte_mbuf_ptype.c | 1 +
lib/librte_mbuf/rte_mbuf_ptype.h | 11 +++++++++++
4 files changed, 50 insertions(+), 3 deletions(-)
diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
index 26a62b8..2978259 100644
--- a/lib/librte_mbuf/rte_mbuf.c
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -323,6 +323,8 @@ const char *rte_get_rx_ol_flag_name(uint64_t mask)
case PKT_RX_QINQ_STRIPPED: return "PKT_RX_QINQ_STRIPPED";
case PKT_RX_LRO: return "PKT_RX_LRO";
case PKT_RX_TIMESTAMP: return "PKT_RX_TIMESTAMP";
+ case PKT_RX_SEC_OFFLOAD: return "PKT_RX_SEC_OFFLOAD";
+ case PKT_RX_SEC_OFFLOAD_FAILED: return "PKT_RX_SEC_OFFLOAD_FAILED";
default: return NULL;
}
}
@@ -358,6 +360,8 @@ rte_get_rx_ol_flag_list(uint64_t mask, char *buf, size_t buflen)
{ PKT_RX_QINQ_STRIPPED, PKT_RX_QINQ_STRIPPED, NULL },
{ PKT_RX_LRO, PKT_RX_LRO, NULL },
{ PKT_RX_TIMESTAMP, PKT_RX_TIMESTAMP, NULL },
+ { PKT_RX_SEC_OFFLOAD, PKT_RX_SEC_OFFLOAD, NULL },
+ { PKT_RX_SEC_OFFLOAD_FAILED, PKT_RX_SEC_OFFLOAD_FAILED, NULL },
};
const char *name;
unsigned int i;
@@ -410,6 +414,7 @@ const char *rte_get_tx_ol_flag_name(uint64_t mask)
case PKT_TX_TUNNEL_GENEVE: return "PKT_TX_TUNNEL_GENEVE";
case PKT_TX_TUNNEL_MPLSINUDP: return "PKT_TX_TUNNEL_MPLSINUDP";
case PKT_TX_MACSEC: return "PKT_TX_MACSEC";
+ case PKT_TX_SEC_OFFLOAD: return "PKT_TX_SEC_OFFLOAD";
default: return NULL;
}
}
@@ -443,6 +448,7 @@ rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen)
{ PKT_TX_TUNNEL_MPLSINUDP, PKT_TX_TUNNEL_MASK,
"PKT_TX_TUNNEL_NONE" },
{ PKT_TX_MACSEC, PKT_TX_MACSEC, NULL },
+ { PKT_TX_SEC_OFFLOAD, PKT_TX_SEC_OFFLOAD, NULL },
};
const char *name;
unsigned int i;
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index eaed7ee..95f2906 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -189,11 +189,26 @@ extern "C" {
*/
#define PKT_RX_TIMESTAMP (1ULL << 17)
+/**
+ * Indicate that security offload processing was applied on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD (1ULL << 18)
+
+/**
+ * Indicate that security offload processing failed on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD_FAILED (1ULL << 19)
+
/* add new RX flags here */
/* add new TX flags here */
/**
+ * Request security offload processing on the TX packet.
+ */
+#define PKT_TX_SEC_OFFLOAD (1ULL << 43)
+
+/**
* Offload the MACsec. This flag must be set by the application to enable
* this offload feature for a packet to be transmitted.
*/
@@ -316,7 +331,8 @@ extern "C" {
PKT_TX_QINQ_PKT | \
PKT_TX_VLAN_PKT | \
PKT_TX_TUNNEL_MASK | \
- PKT_TX_MACSEC)
+ PKT_TX_MACSEC | \
+ PKT_TX_SEC_OFFLOAD)
#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */
@@ -456,8 +472,21 @@ struct rte_mbuf {
uint32_t l3_type:4; /**< (Outer) L3 type. */
uint32_t l4_type:4; /**< (Outer) L4 type. */
uint32_t tun_type:4; /**< Tunnel type. */
- uint32_t inner_l2_type:4; /**< Inner L2 type. */
- uint32_t inner_l3_type:4; /**< Inner L3 type. */
+ RTE_STD_C11
+ union {
+ uint8_t inner_esp_next_proto;
+ /**< ESP next protocol type, valid if
+ * RTE_PTYPE_TUNNEL_ESP tunnel type is set
+ * on both Tx and Rx.
+ */
+ __extension__
+ struct {
+ uint8_t inner_l2_type:4;
+ /**< Inner L2 type. */
+ uint8_t inner_l3_type:4;
+ /**< Inner L3 type. */
+ };
+ };
uint32_t inner_l4_type:4; /**< Inner L4 type. */
};
};
diff --git a/lib/librte_mbuf/rte_mbuf_ptype.c b/lib/librte_mbuf/rte_mbuf_ptype.c
index e5c4fae..01b51fe 100644
--- a/lib/librte_mbuf/rte_mbuf_ptype.c
+++ b/lib/librte_mbuf/rte_mbuf_ptype.c
@@ -89,6 +89,7 @@ const char *rte_get_ptype_tunnel_name(uint32_t ptype)
case RTE_PTYPE_TUNNEL_NVGRE: return "TUNNEL_NVGRE";
case RTE_PTYPE_TUNNEL_GENEVE: return "TUNNEL_GENEVE";
case RTE_PTYPE_TUNNEL_GRENAT: return "TUNNEL_GRENAT";
+ case RTE_PTYPE_TUNNEL_ESP: return "TUNNEL_ESP";
default: return "TUNNEL_UNKNOWN";
}
}
diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h b/lib/librte_mbuf/rte_mbuf_ptype.h
index acd70bb..aefc0fe 100644
--- a/lib/librte_mbuf/rte_mbuf_ptype.h
+++ b/lib/librte_mbuf/rte_mbuf_ptype.h
@@ -383,6 +383,17 @@ extern "C" {
*/
#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000
/**
+ * ESP (IP Encapsulating Security Payload) tunneling packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x0800
+ * | 'version'=4, 'protocol'=51>
+ * or,
+ * <'ether type'=0x86DD
+ * | 'version'=6, 'next header'=51>
+ */
+#define RTE_PTYPE_TUNNEL_ESP 0x00007000
+/**
* Mask of tunneling packet types.
*/
#define RTE_PTYPE_TUNNEL_MASK 0x0000f000
--
2.9.3
More information about the dev
mailing list