[dpdk-dev] [PATCH v2 00/26] DPDK PMD for OCTEONTX NW device
Ferruh Yigit
ferruh.yigit at intel.com
Mon Oct 9 04:07:08 CEST 2017
On 10/8/2017 1:44 PM, Santosh Shukla wrote:
> v2:
> Includes Minor changes like:
> - Incorporated minor review comment (Suggested y John)
> - Added correct pool handle ops name i.e. from mbuf-pool-ops to
> mbuf-pool-ops-name in the doc.
> - Rebased on Octeontx-fpavf v3 series and tested for same.
> - Refer[7]: rebased (octeontx PMD + octeontx_fpavf mempool pmd) on upstream
> tip commit : 3fb1ea032bd6ff8317af5dac9af901f1f324cab4.
>
> v1:
> This patch set provides the initial version of DPDK PMD for the
> integrated NIC device found in Cavium OCTEONTX SoC(CN83xx) family.
>
> Introduction to OCTEONTX ARM processors can be found
> here: http://www.cavium.com/OCTEON-TX_ARM_Processors.html
>
> OCTEONTX SoC family has two types of NIC controllers,
> 1) nicvf HW, Which is more like traditional NIC(no NPU HW accelerators)
> http://dpdk.org/doc/guides/nics/thunderx.html
>
> 2) NIC controller, based on NPU like HW accelerated coprocessors, like
> HW assisted mempool manager, HW assisted packet scheduler, etc
>
> This driver adds support for the second type device and which will be
> used as HW implementation driver ethdev-eventdev Rx adapter [1]
>
> Implemented features and PMD documentation added
> in doc/guides/nics/features/octeontx.ini and doc/guides/nics/octeontx.rst
> respectively in this patch set.
>
> This driver has the dependency on:
> - IOVA infrastructure [2].
> - Dynamically configure mempool handle (ie.. --mbuf-pool-ops eal arg) [3].
> - Infrastructure to support octeontx HW mempool manager [4].
> - Cavium Octeontx external mempool driver [5]
> Git source repo for all above dependency patches located at [6].
>
> The series has three check patch issues:
> 1) 1 Error on Complex Macro (which I believe it cannot be fixed) # Patch 2
> 2) 1 Error on spacing while using gcc inline assembly(it is false positive) # patch 2
> 3) Added Co-authored-by: signature to reflect the patch authorship status instead
> of "Signed-off-by". It can be changed or the contributing guide can be
> updated based on the community feedback in v2.
>
> [1] http://dpdk.org/dev/patchwork/patch/24176/
> [2] http://dpdk.org/ml/archives/dev/2017-August/072871.html
> [3] http://dpdk.org/ml/archives/dev/2017-August/072910.html
> [4] http://dpdk.org/ml/archives/dev/2017-August/072892.html
> [5] http://dpdk.org/ml/archives/dev/2017-August/073898.html
> [6] https://github.com/sshukla82/dpdk branch: mempool-v2
> [7] https://github.com/sshukla82/dpdk branch: octeontx-ona-pmd-v2
>
>
> Jerin Jacob (26):
> net/octeontx: add build infrastructure
> net/octeontx/base: add octeontx io operations
> event/octeontx: introduce specialized mbox message copy
> net/octeontx/base: add base BGX operations
> net/octeontx/base: add remaining BGX operations
> net/octeontx/base: probe PKI and PKO PCIe VF devices
> net/octeontx/base: add base PKI operations
> net/octeontx/base: add remaining PKI operations
> net/octeontx/base: add base PKO operations
> net/octeontx/base: add remaining PKO operations
> net/octeontx: add eth device probe and remove
> net/octeontx: create ethdev ports
> net/octeontx: add device configure
> net/octeontx: add device info
> net/octeontx: add link update
> net/octeontx: add promiscuous mode ops
> net/octeontx: add basic stats support
> net/octeontx: add MAC addr set op
> net/octeontx: add Rx queue setup and release ops
> net/octeontx: add Tx queue start and stop
> net/octeontx: add Tx queue setup and release ops
> net/octeontx: add packet transmit burst function
> net/octeontx: add packet receive burst function
> net/octeontx: add packet type parsing support
> net/octeontx: add start and stop support
> doc: add octeontx ethdev driver documentation
Series applied to dpdk-next-net/master, thanks.
More information about the dev
mailing list