[dpdk-dev] [PATCH 6/8] test: fix port id type

Zhiyong Yang zhiyong.yang at intel.com
Fri Oct 13 15:16:59 CEST 2017


Fixes: f8244c6399d9 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang at intel.com>
---
 test/test-pipeline/init.c             | 8 ++++----
 test/test/test_link_bonding.c         | 2 +-
 test/test/test_link_bonding_mode4.c   | 4 ++--
 test/test/test_link_bonding_rssconf.c | 7 ++++---
 4 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/test/test-pipeline/init.c b/test/test-pipeline/init.c
index 1457c7890..b1f8e93ea 100644
--- a/test/test-pipeline/init.c
+++ b/test/test-pipeline/init.c
@@ -194,9 +194,9 @@ app_ports_check_link(void)
 
 	for (i = 0; i < app.n_ports; i++) {
 		struct rte_eth_link link;
-		uint8_t port;
+		uint16_t port;
 
-		port = (uint8_t) app.ports[i];
+		port = app.ports[i];
 		memset(&link, 0, sizeof(link));
 		rte_eth_link_get_nowait(port, &link);
 		RTE_LOG(INFO, USER1, "Port %u (%u Gbps) %s\n",
@@ -219,10 +219,10 @@ app_init_ports(void)
 
 	/* Init NIC ports, then start the ports */
 	for (i = 0; i < app.n_ports; i++) {
-		uint8_t port;
+		uint16_t port;
 		int ret;
 
-		port = (uint8_t) app.ports[i];
+		port = app.ports[i];
 		RTE_LOG(INFO, USER1, "Initializing NIC port %u ...\n", port);
 
 		/* Init port */
diff --git a/test/test/test_link_bonding.c b/test/test/test_link_bonding.c
index e41ab60d2..c6e3a725b 100644
--- a/test/test/test_link_bonding.c
+++ b/test/test/test_link_bonding.c
@@ -226,7 +226,7 @@ static void free_virtualpmd_tx_queue(void);
 
 
 static int
-configure_ethdev(uint8_t port_id, uint8_t start, uint8_t en_isr)
+configure_ethdev(uint16_t port_id, uint8_t start, uint8_t en_isr)
 {
 	int q_id;
 
diff --git a/test/test/test_link_bonding_mode4.c b/test/test/test_link_bonding_mode4.c
index 5deea6e16..a7a3f8e25 100644
--- a/test/test/test_link_bonding_mode4.c
+++ b/test/test/test_link_bonding_mode4.c
@@ -102,7 +102,7 @@ static const struct ether_addr slow_protocol_mac_addr = {
 struct slave_conf {
 	struct rte_ring *rx_queue;
 	struct rte_ring *tx_queue;
-	uint8_t port_id;
+	uint16_t port_id;
 	uint8_t bonded : 1;
 
 	uint8_t lacp_parnter_state;
@@ -235,7 +235,7 @@ free_pkts(struct rte_mbuf **pkts, uint16_t count)
 }
 
 static int
-configure_ethdev(uint8_t port_id, uint8_t start)
+configure_ethdev(uint16_t port_id, uint8_t start)
 {
 	TEST_ASSERT(rte_eth_dev_configure(port_id, 1, 1, &default_pmd_conf) == 0,
 		"Failed to configure device %u", port_id);
diff --git a/test/test/test_link_bonding_rssconf.c b/test/test/test_link_bonding_rssconf.c
index f8cf1cabf..7dccc6e12 100644
--- a/test/test/test_link_bonding_rssconf.c
+++ b/test/test/test_link_bonding_rssconf.c
@@ -75,7 +75,7 @@
 #define INVALID_BONDING_MODE    (-1)
 
 struct slave_conf {
-	uint8_t port_id;
+	uint16_t port_id;
 	struct rte_eth_dev_info dev_info;
 
 	struct rte_eth_rss_conf rss_conf;
@@ -159,7 +159,8 @@ static struct rte_eth_conf rss_pmd_conf = {
 		RTE_DIM(test_params.slave_ports))
 
 static int
-configure_ethdev(uint8_t port_id, struct rte_eth_conf *eth_conf, uint8_t start)
+configure_ethdev(uint16_t port_id, struct rte_eth_conf *eth_conf,
+		 uint8_t start)
 {
 	int rxq, txq;
 
@@ -243,7 +244,7 @@ bond_slaves(void)
  * Set all RETA values in port_id to value
  */
 static int
-reta_set(uint8_t port_id, uint8_t value, int reta_size)
+reta_set(uint16_t port_id, uint8_t value, int reta_size)
 {
 	struct rte_eth_rss_reta_entry64 reta_conf[512/RTE_RETA_GROUP_SIZE];
 	int i, j;
-- 
2.13.3



More information about the dev mailing list