[dpdk-dev] [PATCH v4 1/7] member: implement main API

Yipeng Wang yipeng1.wang at intel.com
Wed Sep 27 19:40:28 CEST 2017


Membership library is an extension and generalization of a traditional
filter (for example Bloom Filter) structure. In general, the Membership
library is a data structure that provides a "set-summary" and responds
to set-membership queries of whether a certain element belongs to a
set(s). A membership test for an element will return the set this element
belongs to or not-found if the element is never inserted into the
set-summary.

The results of the membership test are not 100% accurate. Certain
false positive or false negative probability could exist. However,
comparing to a "full-blown" complete list of elements, a "set-summary"
is memory efficient and fast on lookup.

This patch adds the main API definition.

Signed-off-by: Yipeng Wang <yipeng1.wang at intel.com>
---
 lib/Makefile                             |   2 +
 lib/librte_member/Makefile               |  49 +++
 lib/librte_member/rte_member.c           | 336 ++++++++++++++++++++
 lib/librte_member/rte_member.h           | 507 +++++++++++++++++++++++++++++++
 lib/librte_member/rte_member_version.map |  16 +
 5 files changed, 910 insertions(+)
 create mode 100644 lib/librte_member/Makefile
 create mode 100644 lib/librte_member/rte_member.c
 create mode 100644 lib/librte_member/rte_member.h
 create mode 100644 lib/librte_member/rte_member_version.map

diff --git a/lib/Makefile b/lib/Makefile
index 86caba1..c82033a 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -108,6 +108,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_REORDER) += librte_reorder
 DEPDIRS-librte_reorder := librte_eal librte_mempool librte_mbuf
 DIRS-$(CONFIG_RTE_LIBRTE_PDUMP) += librte_pdump
 DEPDIRS-librte_pdump := librte_eal librte_mempool librte_mbuf librte_ether
+DIRS-$(CONFIG_RTE_LIBRTE_MEMBER) += librte_member
+DEPDIRS-librte_member := librte_eal librte_hash
 
 ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
 DIRS-$(CONFIG_RTE_LIBRTE_KNI) += librte_kni
diff --git a/lib/librte_member/Makefile b/lib/librte_member/Makefile
new file mode 100644
index 0000000..1a79eaa
--- /dev/null
+++ b/lib/librte_member/Makefile
@@ -0,0 +1,49 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_member.a
+
+CFLAGS := -I$(SRCDIR) $(CFLAGS)
+CFLAGS += $(WERROR_FLAGS) -O3
+
+EXPORT_MAP := rte_member_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_MEMBER) +=  rte_member.c
+# install includes
+SYMLINK-$(CONFIG_RTE_LIBRTE_MEMBER)-include := rte_member.h
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_member/rte_member.c b/lib/librte_member/rte_member.c
new file mode 100644
index 0000000..fee75a3
--- /dev/null
+++ b/lib/librte_member/rte_member.c
@@ -0,0 +1,336 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_eal.h>
+#include <rte_eal_memconfig.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_malloc.h>
+#include <rte_errno.h>
+
+#include "rte_member.h"
+#include "rte_member_ht.h"
+#include "rte_member_vbf.h"
+
+int librte_member_logtype;
+
+TAILQ_HEAD(rte_member_list, rte_tailq_entry);
+static struct rte_tailq_elem rte_member_tailq = {
+	.name = "RTE_MEMBER",
+};
+EAL_REGISTER_TAILQ(rte_member_tailq)
+
+struct rte_member_setsum *
+rte_member_find_existing(const char *name)
+{
+	struct rte_member_setsum *setsum = NULL;
+	struct rte_tailq_entry *te;
+	struct rte_member_list *member_list;
+
+	member_list = RTE_TAILQ_CAST(rte_member_tailq.head, rte_member_list);
+
+	rte_rwlock_read_lock(RTE_EAL_TAILQ_RWLOCK);
+	TAILQ_FOREACH(te, member_list, next) {
+		setsum = (struct rte_member_setsum *) te->data;
+		if (strncmp(name, setsum->name, RTE_MEMBER_NAMESIZE) == 0)
+			break;
+	}
+	rte_rwlock_read_unlock(RTE_EAL_TAILQ_RWLOCK);
+
+	if (te == NULL) {
+		rte_errno = ENOENT;
+		return NULL;
+	}
+	return setsum;
+}
+
+void
+rte_member_free(struct rte_member_setsum *setsum)
+{
+	struct rte_member_list *member_list;
+	struct rte_tailq_entry *te;
+
+	if (setsum == NULL)
+		return;
+	member_list = RTE_TAILQ_CAST(rte_member_tailq.head, rte_member_list);
+	rte_rwlock_write_lock(RTE_EAL_TAILQ_RWLOCK);
+	TAILQ_FOREACH(te, member_list, next) {
+		if (te->data == (void *)setsum)
+			break;
+	}
+	if (te == NULL) {
+		rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
+		return;
+	}
+	TAILQ_REMOVE(member_list, te, next);
+	rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
+
+	switch (setsum->type) {
+	case RTE_MEMBER_TYPE_HT:
+		rte_member_free_ht(setsum);
+		break;
+	case RTE_MEMBER_TYPE_VBF:
+		rte_member_free_vbf(setsum);
+		break;
+	default:
+		break;
+	}
+	rte_free(setsum);
+	rte_free(te);
+}
+
+struct rte_member_setsum *
+rte_member_create(const struct rte_member_parameters *params)
+{
+	struct rte_tailq_entry *te;
+	struct rte_member_list *member_list;
+	struct rte_member_setsum *setsum;
+	int ret;
+
+	if (params == NULL) {
+		rte_errno = EINVAL;
+		return NULL;
+	}
+
+	if (params->key_len == 0 ||
+			params->prim_hash_seed == params->sec_hash_seed) {
+		rte_errno = EINVAL;
+		RTE_MEMBER_LOG(ERR, "Memship create with invalid parameters\n");
+		return NULL;
+	}
+
+	member_list = RTE_TAILQ_CAST(rte_member_tailq.head, rte_member_list);
+
+	rte_rwlock_write_lock(RTE_EAL_TAILQ_RWLOCK);
+
+	TAILQ_FOREACH(te, member_list, next) {
+		setsum = (struct rte_member_setsum *) te->data;
+		if (strncmp(params->name, setsum->name,
+				RTE_MEMBER_NAMESIZE) == 0)
+			break;
+	}
+	setsum = NULL;
+	if (te != NULL) {
+		rte_errno = EEXIST;
+		te = NULL;
+		goto error_unlock_exit;
+	}
+	te = rte_zmalloc("MEMBER_TAILQ_ENTRY", sizeof(*te), 0);
+	if (te == NULL) {
+		RTE_MEMBER_LOG(ERR, "tailq entry allocation failed\n");
+		goto error_unlock_exit;
+	}
+
+	/* Create a new setsum structure */
+	setsum = (struct rte_member_setsum *) rte_zmalloc_socket(params->name,
+			sizeof(struct rte_member_setsum), RTE_CACHE_LINE_SIZE,
+			params->socket_id);
+	if (setsum == NULL) {
+		RTE_MEMBER_LOG(ERR, "Create setsummary failed\n");
+		goto error_unlock_exit;
+	}
+	snprintf(setsum->name, sizeof(setsum->name), "%s", params->name);
+	setsum->type = params->type;
+	setsum->socket_id = params->socket_id;
+	setsum->key_len = params->key_len;
+	setsum->num_set = params->num_set;
+	setsum->prim_hash_seed = params->prim_hash_seed;
+	setsum->sec_hash_seed = params->sec_hash_seed;
+
+	switch (setsum->type) {
+	case RTE_MEMBER_TYPE_HT:
+		ret = rte_member_create_ht(setsum, params);
+		break;
+	case RTE_MEMBER_TYPE_VBF:
+		ret = rte_member_create_vbf(setsum, params);
+		break;
+	default:
+		goto error_unlock_exit;
+	}
+	if (ret < 0)
+		goto error_unlock_exit;
+
+	RTE_MEMBER_LOG(DEBUG, "Creating a setsummary table with "
+			"mode %u\n", setsum->type);
+
+	te->data = (void *)setsum;
+	TAILQ_INSERT_TAIL(member_list, te, next);
+	rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
+	return setsum;
+
+error_unlock_exit:
+	rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
+	rte_member_free(setsum);
+	return NULL;
+}
+
+int
+rte_member_add(const struct rte_member_setsum *setsum, const void *key,
+			member_set_t set_id)
+{
+	if (setsum == NULL || key == NULL)
+		return -EINVAL;
+
+	switch (setsum->type) {
+	case RTE_MEMBER_TYPE_HT:
+		return rte_member_add_ht(setsum, key, set_id);
+	case RTE_MEMBER_TYPE_VBF:
+		return rte_member_add_vbf(setsum, key, set_id);
+	default:
+		return -EINVAL;
+	}
+}
+
+int
+rte_member_lookup(const struct rte_member_setsum *setsum, const void *key,
+			member_set_t *set_id)
+{
+	if (setsum == NULL || key == NULL || set_id == NULL)
+		return -EINVAL;
+
+	switch (setsum->type) {
+	case RTE_MEMBER_TYPE_HT:
+		return rte_member_lookup_ht(setsum, key, set_id);
+	case RTE_MEMBER_TYPE_VBF:
+		return rte_member_lookup_vbf(setsum, key, set_id);
+	default:
+		return -EINVAL;
+	}
+}
+
+int
+rte_member_lookup_bulk(const struct rte_member_setsum *setsum,
+				const void **keys, uint32_t num_keys,
+				member_set_t *set_ids)
+{
+	if (setsum == NULL || keys == NULL || set_ids == NULL)
+		return -EINVAL;
+
+	switch (setsum->type) {
+	case RTE_MEMBER_TYPE_HT:
+		return rte_member_lookup_bulk_ht(setsum, keys, num_keys,
+				set_ids);
+	case RTE_MEMBER_TYPE_VBF:
+		return rte_member_lookup_bulk_vbf(setsum, keys, num_keys,
+				set_ids);
+	default:
+		return -EINVAL;
+	}
+}
+
+int
+rte_member_lookup_multi(const struct rte_member_setsum *setsum, const void *key,
+				uint32_t match_per_key, member_set_t *set_id)
+{
+	if (setsum == NULL || key == NULL || set_id == NULL)
+		return -EINVAL;
+
+	switch (setsum->type) {
+	case RTE_MEMBER_TYPE_HT:
+		return rte_member_lookup_multi_ht(setsum, key, match_per_key,
+				set_id);
+	case RTE_MEMBER_TYPE_VBF:
+		return rte_member_lookup_multi_vbf(setsum, key, match_per_key,
+				set_id);
+	default:
+		return -EINVAL;
+	}
+}
+
+int
+rte_member_lookup_multi_bulk(const struct rte_member_setsum *setsum,
+			const void **keys, uint32_t num_keys,
+			uint32_t max_match_per_key, uint32_t *match_count,
+			member_set_t *set_ids)
+{
+	if (setsum == NULL || keys == NULL || set_ids == NULL ||
+			match_count == NULL)
+		return -EINVAL;
+
+	switch (setsum->type) {
+	case RTE_MEMBER_TYPE_HT:
+		return rte_member_lookup_multi_bulk_ht(setsum, keys, num_keys,
+				max_match_per_key, match_count, set_ids);
+	case RTE_MEMBER_TYPE_VBF:
+		return rte_member_lookup_multi_bulk_vbf(setsum, keys, num_keys,
+				max_match_per_key, match_count, set_ids);
+	default:
+		return -EINVAL;
+	}
+}
+
+int
+rte_member_delete(const struct rte_member_setsum *setsum, const void *key,
+			member_set_t set_id)
+{
+	if (setsum == NULL || key == NULL)
+		return -EINVAL;
+
+	switch (setsum->type) {
+	case RTE_MEMBER_TYPE_HT:
+		return rte_member_delete_ht(setsum, key, set_id);
+	/* current vBF implementation does not support delete function */
+	case RTE_MEMBER_TYPE_VBF:
+	default:
+		return -EINVAL;
+	}
+}
+
+void
+rte_member_reset(const struct rte_member_setsum *setsum)
+{
+	if (setsum == NULL)
+		return;
+	switch (setsum->type) {
+	case RTE_MEMBER_TYPE_HT:
+		rte_member_reset_ht(setsum);
+		return;
+	case RTE_MEMBER_TYPE_VBF:
+		rte_member_reset_vbf(setsum);
+		return;
+	default:
+		return;
+	}
+}
+
+RTE_INIT(librte_member_init_log);
+
+static void
+librte_member_init_log(void)
+{
+	librte_member_logtype = rte_log_register("librte.member");
+	if (librte_member_logtype >= 0)
+		rte_log_set_level(librte_member_logtype, RTE_LOG_DEBUG);
+}
diff --git a/lib/librte_member/rte_member.h b/lib/librte_member/rte_member.h
new file mode 100644
index 0000000..48c6de7
--- /dev/null
+++ b/lib/librte_member/rte_member.h
@@ -0,0 +1,507 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * @file
+ *
+ * RTE Membership Library
+ *
+ * The Membership Library is an extension and generalization of a traditional
+ * filter (for example Bloom Filter) structure that has multiple usages in a
+ * variety of workloads and applications. The library is used to test if a key
+ * belongs to certain sets. Two types of such "set-summary" structures are
+ * implemented: hash-table based (HT) and vector bloom filter (vBF). For HT
+ * setsummary, two subtype or modes are available, cache and non-cache modes.
+ * The table below summarize some properties of the different implementations.
+ *
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ */
+
+/**
+ * <!--
+ * +==========+=====================+================+=========================+
+ * |   type   |      vbf            |     HT-cache   |     HT-non-cache        |
+ * +==========+=====================+==========================================+
+ * |structure |  bloom-filter array |  hash-table like without storing key     |
+ * +----------+---------------------+------------------------------------------+
+ * |set id    | limited by bf count |           [1, 0x7fff]                    |
+ * |          | up to 32.           |                                          |
+ * +----------+---------------------+------------------------------------------+
+ * |usages &  | small set range,    | can delete,    | cache most recent keys, |
+ * |properties| user-specified      | big set range, | have both false-positive|
+ * |          | false-positive rate,| small false    | and false-negative      |
+ * |          | no deletion support.| positive depend| depend on table size,   |
+ * |          |                     | on table size, | automatic overwritten.  |
+ * |          |                     | new key does   |                         |
+ * |          |                     | not overwrite  |                         |
+ * |          |                     | existing key.  |                         |
+ * +----------+---------------------+----------------+-------------------------+
+ * -->
+ */
+
+#ifndef _RTE_MEMBER_H_
+#define _RTE_MEMBER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/** The set ID type that stored internally in hash table based set summary. */
+typedef uint16_t member_set_t;
+/** Invalid set ID used to mean no match found. */
+#define RTE_MEMBER_NO_MATCH 0
+/** Maximum size of hash table that can be created. */
+#define RTE_MEMBER_ENTRIES_MAX (1 << 30)
+/** Maximum number of keys that can be searched as a bulk */
+#define RTE_MEMBER_LOOKUP_BULK_MAX 64
+/** Entry count per bucket in hash table based mode. */
+#define RTE_MEMBER_BUCKET_ENTRIES 16
+/** Maximum number of characters in setsum name. */
+#define RTE_MEMBER_NAMESIZE 32
+
+/** @internal Hash function used by membership library. */
+#if defined(RTE_ARCH_X86) || defined(RTE_MACHINE_CPUFLAG_CRC32)
+#include <rte_hash_crc.h>
+#define MEMBER_HASH_FUNC       rte_hash_crc
+#else
+#include <rte_jhash.h>
+#define MEMBER_HASH_FUNC       rte_jhash
+#endif
+
+extern int librte_member_logtype;
+
+#define RTE_MEMBER_LOG(level, fmt, args...) \
+rte_log(RTE_LOG_ ## level, librte_member_logtype, "%s(): " fmt, \
+	__func__, ## args)
+
+/** @internal setsummary structure. */
+struct rte_member_setsum;
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Parameter struct used to create set summary
+ */
+struct rte_member_parameters;
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Define different set summary types
+ */
+enum rte_member_setsum_type {
+	RTE_MEMBER_TYPE_HT = 0,  /**< Hash table based set summary. */
+	RTE_MEMBER_TYPE_VBF,     /**< Vector of bloom filters. */
+	RTE_MEMBER_NUM_TYPE
+};
+
+/** @internal compare function for different arch. */
+enum rte_member_sig_compare_function {
+	RTE_MEMBER_COMPARE_SCALAR = 0,
+	RTE_MEMBER_COMPARE_AVX2,
+	RTE_MEMBER_COMPARE_NUM
+};
+
+/** @internal setsummary structure. */
+struct rte_member_setsum {
+	enum rte_member_setsum_type type; /* Type of the set summary. */
+	uint32_t key_len;		/* Length of key. */
+	uint32_t prim_hash_seed;	/* Primary hash function seed. */
+	uint32_t sec_hash_seed;		/* Secondary hash function seed. */
+
+	/* Hash table based. */
+	uint32_t bucket_cnt;		/* Number of buckets. */
+	uint32_t bucket_mask;		/* Bit mask to get bucket index. */
+	/* For runtime selecting AVX, scalar, etc for signature comparison. */
+	enum rte_member_sig_compare_function sig_cmp_fn;
+	uint8_t cache;			/* If it is cache mode for ht based. */
+
+	/* Vector bloom filter. */
+	uint32_t num_set;		/* Number of set (bf) in vbf. */
+	uint32_t bits;			/* Number of bits in each bf. */
+	uint32_t bit_mask;	/* Bit mask to get bit location in bf. */
+	uint32_t num_hashes;	/* Number of hash values to index bf. */
+
+	uint32_t mul_shift;  /* vbf internal variable used during bit test. */
+	uint32_t div_shift;  /* vbf internal variable used during bit test. */
+
+	void *table;	/* This is the handler of hash table or vBF array. */
+
+
+	/* Second cache line should start here. */
+	uint32_t socket_id;          /* NUMA Socket ID for memory. */
+	char name[RTE_MEMBER_NAMESIZE]; /* Name of this set summary. */
+} __rte_cache_aligned;
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Parameters used when create the set summary table. Currently user can
+ * specify two types of setsummary: HT based and vBF. For HT based, user can
+ * specify cache or non-cache mode. Here is a table to describe some differences
+ *
+ */
+struct rte_member_parameters {
+	const char *name;			/**< Name of the hash. */
+
+	/**
+	 * User to specify the type of the setsummary from one of
+	 * rte_member_setsum_type.
+	 *
+	 * HT based setsummary is implemented like a hash table. User should use
+	 * this type when there are many sets.
+	 *
+	 * vBF setsummary is a vector of bloom filters. It is used when number
+	 * of sets is not big (less than 32 for current implementation).
+	 */
+	enum rte_member_setsum_type type;
+
+	/**
+	 * If it is HT based setsummary, user to specify the subtype or mode
+	 * of the setsummary. It could be cache, or non-cache mode.
+	 * Set iscache to be 1 if to use as cache mode.
+	 *
+	 * For cache mode, keys can be evicted out of the HT setsummary. Keys
+	 * with the same signature and map to the same bucket
+	 * will overwrite each other in the setsummary table.
+	 * This mode is useful for the case that the set-summary only
+	 * needs to keep record of the recently inserted keys. Both
+	 * false-negative and false-positive could happen.
+	 *
+	 * For non-cache mode, keys cannot be evicted out of the cache. So for
+	 * this mode the setsummary will become full eventually. Keys with the
+	 * same signature but map to the same bucket will still occupy multiple
+	 * entries. This mode does not give false-negative result.
+	 */
+	uint8_t is_cache;
+
+	/**
+	 * For HT setsummary, num_keys equals to the number of entries of the
+	 * table. When the number of keys that inserted in the HT setsummary
+	 * approaches this number, eviction could happen. For cache mode,
+	 * keys could be evicted out of the table. For non-cache mode, keys will
+	 * be evicted to other buckets like cuckoo hash. The table will also
+	 * likely to become full before the number of inserted keys equal to the
+	 * total number of entries.
+	 *
+	 * For vBF, num_keys equal to the expected number of keys that will
+	 * be inserted into the vBF. The implementation assumes the keys are
+	 * evenly distributed to each BF in vBF. This is used to calculate the
+	 * number of bits we need for each BF. User does not specify the size of
+	 * each BF directly because the optimal size depends on the num_keys
+	 * and false positive rate.
+	 */
+	uint32_t num_keys;
+
+	/**
+	 * The length of key is used for hash calculation. Since key is not
+	 * stored in set-summary, large key does not require more memory space.
+	 */
+	uint32_t key_len;
+
+	/**
+	 * num_set is only relevant to vBF based setsummary.
+	 * num_set is equal to the number of BFs in vBF. For current
+	 * implementation, it only supports 1,2,4,8,16,32 BFs in one vBF set
+	 * summary. If other number of sets are needed, for example 5, the user
+	 * should allocate the minimum available value that larger than 5,
+	 * which is 8.
+	 */
+	uint32_t num_set;
+
+	/**
+	 * false_positive_rate is only relevant to vBF based setsummary.
+	 * false_positive_rate is the user-defined false positive rate
+	 * given expected number of inserted keys (num_keys). It is used to
+	 * calculate the total number of bits for each BF, and the number of
+	 * hash values used during lookup and insertion. For details please
+	 * refer to vBF implementation and membership library documentation.
+	 * Note that this parameter is not directly set by users for HT mode.
+	 *
+	 * HT setsummary's false positive rate is in the order of:
+	 * false_pos = (1/bucket_count)*(1/2^16), since we use 16-bit signature.
+	 * This is because two keys needs to map to same bucket and same
+	 * signature to have a collision (false positive). bucket_count is equal
+	 * to number of entries (num_keys) divided by entry count per bucket
+	 * (RTE_MEMBER_BUCKET_ENTRIES). Thus, the false_positive_rate is not
+	 * directly set by users.
+	 */
+	float false_positive_rate;
+
+	/**
+	 * We use two seeds to calculate two independent hashes for each key.
+	 *
+	 * For HT type, one hash is used as signature, and the other is used
+	 * for bucket location.
+	 * For vBF type, these two hashes and their combinations are used as
+	 * hash locations to index the bit array.
+	 */
+	uint32_t prim_hash_seed;
+
+	/**
+	 * The secondary seed should be a different value from the primary seed.
+	 */
+	uint32_t sec_hash_seed;
+
+	int socket_id;			/**< NUMA Socket ID for memory. */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Find an existing set-summary and return a pointer to it.
+ *
+ * @param name
+ *   Name of the set-summary.
+ * @return
+ *   Pointer to the set-summary or NULL if object not found
+ *   with rte_errno set appropriately. Possible rte_errno values include:
+ *    - ENOENT - value not available for return
+ */
+struct rte_member_setsum *
+rte_member_find_existing(const char *name);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Create set-summary (SS).
+ *
+ * @param params
+ *   Parameters to initialize the setsummary.
+ * @return
+ *   Return the pointer to the setsummary.
+ *   Return value is NULL if the creation failed.
+ */
+struct rte_member_setsum *
+rte_member_create(const struct rte_member_parameters *params);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Lookup key in set-summary (SS).
+ * Single key lookup and return as soon as the first match found
+ *
+ * @param setsum
+ *   Pointer of a setsummary.
+ * @param key
+ *   Pointer of the key to be looked up.
+ * @param set_id
+ *   Output the set id matches the key.
+ * @return
+ *   Return 1 for found a match and 0 for not found a match.
+ */
+int
+rte_member_lookup(const struct rte_member_setsum *setsum, const void *key,
+			member_set_t *set_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * lookup bulk of keys in set-summary (SS).
+ * Each key lookup returns as soon as the first match found
+ *
+ * @param setsum
+ *   Pointer of a setsummary.
+ * @param keys
+ *   Pointer of the bulk of keys to be looked up.
+ * @param num_keys
+ *   Number of keys that will be lookup.
+ * @param set_ids
+ *   Output set ids for all the keys to this array.
+ *   User should preallocate array that can contain all results, which size is
+ *   the num_keys.
+ * @return
+ *   The number of keys that found a match.
+ */
+int
+rte_member_lookup_bulk(const struct rte_member_setsum *setsum,
+			const void **keys, uint32_t num_keys,
+			member_set_t *set_ids);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Lookup a key in set-summary (SS) for multiple matches.
+ * The key lookup will find all matched entries (multiple match).
+ * Note that for cache mode of HT, each key can have at most one match. This is
+ * because keys with same signature that maps to same bucket will overwrite
+ * each other. So multi-match lookup should be used for vBF and non-cache HT.
+ *
+ * @param setsum
+ *   Pointer of a set-summary.
+ * @param key
+ *   Pointer of the key that to be looked up.
+ * @param max_match_per_key
+ *   User specified maximum number of matches for each key. The function returns
+ *   as soon as this number of matches found for the key.
+ * @param set_id
+ *   Output set ids for all the matches of the key. User needs to preallocate
+ *   the array that can contain max_match_per_key number of results.
+ * @return
+ *   The number of matches that found for the key.
+ *   For cache mode HT set-summary, the number should be at most 1.
+ */
+int
+rte_member_lookup_multi(const struct rte_member_setsum *setsum,
+		const void *key, uint32_t max_match_per_key,
+		member_set_t *set_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Lookup a bulk of keys in set-summary (SS) for multiple matches each key.
+ * Each key lookup will find all matched entries (multiple match).
+ * Note that for cache mode HT, each key can have at most one match. So
+ * multi-match function is mainly used for vBF and non-cache mode HT.
+ *
+ * @param setsum
+ *   Pointer of a setsummary.
+ * @param keys
+ *   Pointer of the keys to be looked up.
+ * @param num_keys
+ *   The number of keys that will be lookup.
+ * @param max_match_per_key
+ *   The possible maximum number of matches for each key.
+ * @param match_count
+ *   Output the number of matches for each key in an array.
+ * @param set_ids
+ *   Return set ids for all the matches of all keys. Users pass in a
+ *   preallocated 2D array with first dimension as key index and second
+ *   dimension as match index. For example set_ids[bulk_size][max_match_per_key]
+ * @return
+ *   The number of keys that found one or more matches in the set-summary.
+ */
+int
+rte_member_lookup_multi_bulk(const struct rte_member_setsum *setsum,
+		const void **keys, uint32_t num_keys,
+		uint32_t max_match_per_key,
+		uint32_t *match_count,
+		member_set_t *set_ids);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Insert key into set-summary (SS).
+ *
+ * @param setsum
+ *   Pointer of a set-summary.
+ * @param key
+ *   Pointer of the key to be added.
+ * @param set_id
+ *   The set id associated with the key that needs to be added. Different mode
+ *   supports different set_id ranges. 0 cannot be used as set_id since
+ *   RTE_MEMBER_NO_MATCH by default is set as 0.
+ *   For HT mode, the set_id has range as [1, 0x7FFF], MSB is reserved.
+ *   For vBF mode the set id is limited by the num_set parameter when create
+ *   the set-summary.
+ * @return
+ *   HT (cache mode) and vBF should never fail unless the set_id is not in the
+ *   valid range. In such case -EINVAL is returned.
+ *   For HT (non-cache mode) it could fail with -ENOSPC error code when table is
+ *   full.
+ *   For success it returns different values for different modes to provide
+ *   extra information for users.
+ *   Return 0 for HT (cache mode) if the add does not cause
+ *   eviction, return 1 otherwise. Return 0 for non-cache mode if success,
+ *   -ENOSPC for full, and 1 if cuckoo eviction happens.
+ *   Always returns 0 for vBF mode.
+ */
+int
+rte_member_add(const struct rte_member_setsum *setsum, const void *key,
+			member_set_t set_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * De-allocate memory used by set-summary.
+ *
+ * @param setsum
+ *   Pointer to the set summary.
+ */
+void
+rte_member_free(struct rte_member_setsum *setsum);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Reset the set-summary tables. E.g. reset bits to be 0 in BF,
+ * reset set_id in each entry to be RTE_MEMBER_NO_MATCH in HT based SS.
+ *
+ * @param setsum
+ *   Pointer to the set-summary.
+ */
+void
+rte_member_reset(const struct rte_member_setsum *setsum);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Delete items from the set-summary. Note that vBF does not support deletion
+ * in current implementation. For vBF, error code of -EINVAL will be returned.
+ *
+ * @param setsum
+ *   Pointer to the set-summary.
+ * @param key
+ *   Pointer of the key to be deleted.
+ * @param set_id
+ *   For HT mode, we need both key and its corresponding set_id to
+ *   properly delete the key. Without set_id, we may delete other keys with the
+ *   same signature.
+ * @return
+ *   If no entry found to delete, an error code of -ENOENT could be returned.
+ */
+int
+rte_member_delete(const struct rte_member_setsum *setsum, const void *key,
+			member_set_t set_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MEMBER_H_ */
diff --git a/lib/librte_member/rte_member_version.map b/lib/librte_member/rte_member_version.map
new file mode 100644
index 0000000..019e4cd
--- /dev/null
+++ b/lib/librte_member/rte_member_version.map
@@ -0,0 +1,16 @@
+DPDK_17.11 {
+	global:
+
+	rte_member_add;
+	rte_member_create;
+	rte_member_delete;
+	rte_member_find_existing;
+	rte_member_free;
+	rte_member_lookup;
+	rte_member_lookup_bulk;
+	rte_member_lookup_multi;
+	rte_member_lookup_multi_bulk;
+	rte_member_reset;
+
+	local: *;
+};
-- 
2.7.4



More information about the dev mailing list