[dpdk-dev] [PATCH v2 05/15] net/mlx5: support tunnel inner checksum offloads
Nélio Laranjeiro
nelio.laranjeiro at 6wind.com
Tue Apr 10 17:27:50 CEST 2018
On Tue, Apr 10, 2018 at 09:34:05PM +0800, Xueming Li wrote:
> This patch support tunnel inner checksum offloads. By creating tunnel
> flow, once tunnel packet type(RTE_PTYPE_TUNNEL_xxx) identified,
Where is the code creating the tunnel flow?
> PKT_RX_IP_CKSUM_XXX and PKT_RX_L4_CKSUM_XXX represent checksum result of
> inner headers, outer L3 and L4 header checksum are always valid as soon
> as tunnel identified. If no tunnel identified, PKT_RX_IP_CKSUM_XXX and
> PKT_RX_L4_CKSUM_XXX represent checksum result of outer L3 and L4
> headers.
>
> Signed-off-by: Xueming Li <xuemingl at mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow.c | 7 +++++--
> drivers/net/mlx5/mlx5_rxq.c | 2 --
> drivers/net/mlx5/mlx5_rxtx.c | 18 ++++--------------
> drivers/net/mlx5/mlx5_rxtx.h | 1 -
> 4 files changed, 9 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index 65d7a9b62..b3ad6dc85 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -829,6 +829,8 @@ mlx5_flow_convert_actions(struct rte_eth_dev *dev,
> /**
> * Validate items.
> *
> + * @param dev
> + * Pointer to Ethernet device.
> * @param[in] items
> * Pattern specification (list terminated by the END pattern item).
> * @param[out] error
> @@ -840,7 +842,8 @@ mlx5_flow_convert_actions(struct rte_eth_dev *dev,
> * 0 on success, a negative errno value otherwise and rte_errno is set.
> */
> static int
> -mlx5_flow_convert_items_validate(const struct rte_flow_item items[],
> +mlx5_flow_convert_items_validate(struct rte_eth_dev *dev __rte_unused,
> + const struct rte_flow_item items[],
> struct rte_flow_error *error,
> struct mlx5_flow_parse *parser)
> {
> @@ -1146,7 +1149,7 @@ mlx5_flow_convert(struct rte_eth_dev *dev,
> ret = mlx5_flow_convert_actions(dev, actions, error, parser);
> if (ret)
> return ret;
> - ret = mlx5_flow_convert_items_validate(items, error, parser);
> + ret = mlx5_flow_convert_items_validate(dev, items, error, parser);
> if (ret)
> return ret;
> mlx5_flow_convert_finalise(parser);
I don't understand the necessity of the two hunks above.
> diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
> index 351acfc0f..073732e16 100644
> --- a/drivers/net/mlx5/mlx5_rxq.c
> +++ b/drivers/net/mlx5/mlx5_rxq.c
> @@ -1045,8 +1045,6 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
> }
> /* Toggle RX checksum offload if hardware supports it. */
> tmpl->rxq.csum = !!(conf->offloads & DEV_RX_OFFLOAD_CHECKSUM);
> - tmpl->rxq.csum_l2tun = (!!(conf->offloads & DEV_RX_OFFLOAD_CHECKSUM) &&
> - priv->config.tunnel_en);
> tmpl->rxq.hw_timestamp = !!(conf->offloads & DEV_RX_OFFLOAD_TIMESTAMP);
> /* Configure VLAN stripping. */
> tmpl->rxq.vlan_strip = !!(conf->offloads & DEV_RX_OFFLOAD_VLAN_STRIP);
> diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
> index d061dfc8a..285b2dbf0 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.c
> +++ b/drivers/net/mlx5/mlx5_rxtx.c
> @@ -41,7 +41,7 @@ mlx5_rx_poll_len(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe,
> uint16_t cqe_cnt, uint32_t *rss_hash);
>
> static __rte_always_inline uint32_t
> -rxq_cq_to_ol_flags(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe);
> +rxq_cq_to_ol_flags(volatile struct mlx5_cqe *cqe);
>
> uint32_t mlx5_ptype_table[] __rte_cache_aligned = {
> [0xff] = RTE_PTYPE_ALL_MASK, /* Last entry for errored packet. */
> @@ -1728,8 +1728,6 @@ mlx5_rx_poll_len(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe,
> /**
> * Translate RX completion flags to offload flags.
> *
> - * @param[in] rxq
> - * Pointer to RX queue structure.
> * @param[in] cqe
> * Pointer to CQE.
> *
> @@ -1737,7 +1735,7 @@ mlx5_rx_poll_len(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe,
> * Offload flags (ol_flags) for struct rte_mbuf.
> */
> static inline uint32_t
> -rxq_cq_to_ol_flags(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe)
> +rxq_cq_to_ol_flags(volatile struct mlx5_cqe *cqe)
> {
> uint32_t ol_flags = 0;
> uint16_t flags = rte_be_to_cpu_16(cqe->hdr_type_etc);
> @@ -1749,14 +1747,6 @@ rxq_cq_to_ol_flags(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe)
> TRANSPOSE(flags,
> MLX5_CQE_RX_L4_HDR_VALID,
> PKT_RX_L4_CKSUM_GOOD);
> - if ((cqe->pkt_info & MLX5_CQE_RX_TUNNEL_PACKET) && (rxq->csum_l2tun))
> - ol_flags |=
> - TRANSPOSE(flags,
> - MLX5_CQE_RX_L3_HDR_VALID,
> - PKT_RX_IP_CKSUM_GOOD) |
> - TRANSPOSE(flags,
> - MLX5_CQE_RX_L4_HDR_VALID,
> - PKT_RX_L4_CKSUM_GOOD);
> return ol_flags;
> }
>
> @@ -1855,8 +1845,8 @@ mlx5_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
> mlx5_flow_mark_get(mark);
> }
> }
> - if (rxq->csum | rxq->csum_l2tun)
> - pkt->ol_flags |= rxq_cq_to_ol_flags(rxq, cqe);
> + if (rxq->csum)
> + pkt->ol_flags |= rxq_cq_to_ol_flags(cqe);
> if (rxq->vlan_strip &&
> (cqe->hdr_type_etc &
> rte_cpu_to_be_16(MLX5_CQE_VLAN_STRIPPED))) {
> diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
> index 6866f6818..d35605b55 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.h
> +++ b/drivers/net/mlx5/mlx5_rxtx.h
> @@ -77,7 +77,6 @@ struct rxq_zip {
> /* RX queue descriptor. */
> struct mlx5_rxq_data {
> unsigned int csum:1; /* Enable checksum offloading. */
> - unsigned int csum_l2tun:1; /* Same for L2 tunnels. */
> unsigned int hw_timestamp:1; /* Enable HW timestamp. */
> unsigned int vlan_strip:1; /* Enable VLAN stripping. */
> unsigned int crc_present:1; /* CRC must be subtracted. */
> --
> 2.13.3
This last part seems to introduce a regression by removing the support
for the tunnel checksum offload.
Seems this patch is incomplete or wrongly explained.
--
Nélio Laranjeiro
6WIND
More information about the dev
mailing list