[dpdk-dev] [PATCH 1/2] testpmd: add parameters buffersize-before-send and flush-timeout

[Jens Freimann]

On Thu, Apr 12, 2018 at 05:30:54PM +0100, Ferruh Yigit wrote:
>On 4/12/2018 3:57 PM, Ananyev, Konstantin wrote:
>> Hi,
>>
>>>
>>> Create a fifo to buffer received packets. Once it flows over put
>>> those packets into the actual tx queue. The fifo is created per tx
>>> queue and its size can be set with the --buffersize-before-sending
>>> commandline parameter.
>>>
>>> A second commandline parameter is used to set a timeout in
>>> milliseconds after which the fifo is flushed.
>>>
>>> --buffersize-before-sending [packet numbers]
>>> Keep the mbuf in a FIFO and forward the over flooding packets from the
>>> FIFO. This queue is per TX-queue (after all other packet processing).
>>>
>>> --flush-timer [delay]
>>> Flush the packet queue if no packets have been seen during
>>> [delay]. As long as packets are seen, the timer is reset.
>>>
>>
>> I understand your desire to have some realistic fwd scenario,
>> but why it all have to be put in iowfd mode?
>>  iowfd is the simplest one, mainly used to test raw PMD pefomance
>> in nearly ideal conditions.
>> Why not to create your own forwarding mode (as most people do)?
>> That way you'll have your 'real world app' test scenario,
>> while keeping iofwd code small and simple.
>
>+1 to having own forwarding mode for noisy neighbor, and leaving iofwd simple.

I'm okay with a new forwarding mode. I'll send a v2. 
Thanks for the review Konstantin and Ferruh!

regards,
Jens