[dpdk-dev] [PATCH v7 9/9] net/ixgbe: add support for representor ports

[Ananyev, Konstantin]

> --- /dev/null
> +++ b/drivers/net/ixgbe/ixgbe_vf_representor.c
> @@ -0,0 +1,217 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2018 Intel Corporation.
> + */
> +
> +#include <rte_ethdev.h>
> +#include <rte_pci.h>
> +#include <rte_malloc.h>
> +
> +#include "base/ixgbe_type.h"
> +#include "base/ixgbe_vf.h"
> +#include "ixgbe_ethdev.h"
> +#include "ixgbe_rxtx.h"
> +#include "rte_pmd_ixgbe.h"
> +
> +
> +static int
> +ixgbe_vf_representor_link_update(struct rte_eth_dev *ethdev,
> +	int wait_to_complete)
> +{
> +	struct ixgbe_vf_representor *representor = ethdev->data->dev_private;
> +
> +	return ixgbe_dev_link_update_share(representor->pf_ethdev,
> +		wait_to_complete, 1);
> +}
> +
> +static int
> +ixgbe_vf_representor_mac_addr_set(struct rte_eth_dev *ethdev,
> +	struct ether_addr *mac_addr)
> +{
> +	struct ixgbe_vf_representor *representor = ethdev->data->dev_private;
> +
> +	return rte_pmd_ixgbe_set_vf_mac_addr(
> +		representor->pf_ethdev->data->port_id,
> +		representor->vf_id, mac_addr);
> +}
> +
> +static void
> +ixgbe_vf_representor_dev_infos_get(struct rte_eth_dev *ethdev,
> +	struct rte_eth_dev_info *dev_info)
> +{
> +	struct ixgbe_vf_representor *representor = ethdev->data->dev_private;
> +
> +	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(
> +		representor->pf_ethdev->data->dev_private);
> +
> +	dev_info->device = representor->pf_ethdev->device;
> +
> +	dev_info->min_rx_bufsize = 1024;
> +	/**< Minimum size of RX buffer. */
> +	dev_info->max_rx_pktlen = 9728;
> +	/**< Maximum configurable length of RX pkt. */
> +	dev_info->max_rx_queues = IXGBE_VF_MAX_RX_QUEUES;
> +	/**< Maximum number of RX queues. */
> +	dev_info->max_tx_queues = IXGBE_VF_MAX_TX_QUEUES;
> +	/**< Maximum number of TX queues. */

Sort of generic question - for representor ports that do only control path -
shouldn't we have max_rx_queues=max_tx_queues=0, zero and make
queue_setup/rx_burst/tx_burst, etc. to return an error? 

> +
> +	dev_info->max_mac_addrs = hw->mac.num_rar_entries;
> +	/**< Maximum number of MAC addresses. */
> +
> +	dev_info->rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP |
> +		DEV_RX_OFFLOAD_IPV4_CKSUM |	DEV_RX_OFFLOAD_UDP_CKSUM  |
> +		DEV_RX_OFFLOAD_TCP_CKSUM;
> +	/**< Device RX offload capabilities. */
> +
> +	dev_info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT |
> +		DEV_TX_OFFLOAD_IPV4_CKSUM | DEV_TX_OFFLOAD_UDP_CKSUM |
> +		DEV_TX_OFFLOAD_TCP_CKSUM | DEV_TX_OFFLOAD_SCTP_CKSUM |
> +		DEV_TX_OFFLOAD_TCP_TSO;
> +	/**< Device TX offload capabilities. */
> +
> +	dev_info->speed_capa =
> +		representor->pf_ethdev->data->dev_link.link_speed;
> +	/**< Supported speeds bitmap (ETH_LINK_SPEED_). */
> +
> +	dev_info->switch_info.name =
> +		representor->pf_ethdev->device->name;
> +	dev_info->switch_info.domain_id = representor->switch_domain_id;
> +	dev_info->switch_info.port_id = representor->vf_id;
> +}
> +
> +static int ixgbe_vf_representor_dev_configure(
> +		__rte_unused struct rte_eth_dev *dev)
> +{
> +	return 0;
> +}
> +
> +static int ixgbe_vf_representor_rx_queue_setup(
> +	__rte_unused struct rte_eth_dev *dev,
> +	__rte_unused uint16_t rx_queue_id,
> +	__rte_unused uint16_t nb_rx_desc,
> +	__rte_unused unsigned int socket_id,
> +	__rte_unused const struct rte_eth_rxconf *rx_conf,
> +	__rte_unused struct rte_mempool *mb_pool)
> +{
> +	return 0;
> +}
> +
> +static int ixgbe_vf_representor_tx_queue_setup(
> +	__rte_unused struct rte_eth_dev *dev,
> +	__rte_unused uint16_t rx_queue_id,
> +	__rte_unused uint16_t nb_rx_desc,
> +	__rte_unused unsigned int socket_id,
> +	__rte_unused const struct rte_eth_txconf *tx_conf)
> +{
> +	return 0;
> +}
> +