[dpdk-dev] [PATCH] app/testpmd: update start log to be less verbose
Zhang, Qi Z
qi.z.zhang at intel.com
Thu Apr 26 02:16:11 CEST 2018
> -----Original Message-----
> From: Yigit, Ferruh
> Sent: Wednesday, April 25, 2018 10:15 PM
> To: Lu, Wenzhuo <wenzhuo.lu at intel.com>; Wu, Jingjing
> <jingjing.wu at intel.com>
> Cc: dev at dpdk.org; Yigit, Ferruh <ferruh.yigit at intel.com>; Zhang, Qi Z
> <qi.z.zhang at intel.com>
> Subject: [PATCH] app/testpmd: update start log to be less verbose
>
> A per port per queue log is too verbose with multiple port/queue log is
> longer than full screen, make it less verbose:
> - Reduced log to only first queue of the port, as a sample
> - Merged a few lines
> - Indent queue logs for readability
>
> The log becomes as following after update:
>
> testpmd> start tx_first
> io packet forwarding - ports=2 - cores=1 - streams=8 - NUMA support enabled,
> MP over anonymous pages disabled Logical Core 1 (socket 0) forwards
> packets on 8 streams:
> RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
> RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
> RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
> RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
> RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
> RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
> RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
> RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
>
> io packet forwarding packets/burst=32
> nb forwarding cores=1 - nb forwarding ports=2
> port 0: RX queue number: 4 Tx queue number: 4
> Rx offloads=0x1000 Tx offloads=0x0
> RX queue: 0
> RX desc=0 - RX free threshold=32
> RX threshold registers: pthresh=8 hthresh=8 wthresh=0
> RX Offloads=0x1000
> TX queue: 0
> TX desc=0 - TX free threshold=32
> TX threshold registers: pthresh=32 hthresh=0 wthresh=0
> TX RS bit threshold=32
> TX offloads=0x0
> port 1: RX queue number: 4 Tx queue number: 4
> Rx offloads=0x1000 Tx offloads=0x0
> RX queue: 0
> RX desc=0 - RX free threshold=32
> RX threshold registers: pthresh=8 hthresh=8 wthresh=0
> RX Offloads=0x1000
> TX queue: 0
> TX desc=0 - TX free threshold=32
> TX threshold registers: pthresh=32 hthresh=0 wthresh=0
> TX RS bit threshold=32
> TX offloads=0x0
>
> Fixes: 266f28b91e34 ("app/testpmd: enable per queue configure")
> Cc: qi.z.zhang at intel.com
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit at intel.com>
> ---
>
> Hi Qi,
>
> If you are agree with the patch I can squash into original patch.
OK
>
> btw, desc numbers are zero, "TX desc=0","RX desc=0", is this correct?
Yes, since the default value of nb_rxd and nb_txd is 0 which mean let device take its default value.
The patch keep rxtx_config_display just print the configure parameters but not real device configure as before.
But maybe "TX desc=default" is better for readable?
Regards
Qi
More information about the dev
mailing list