[dpdk-dev] [PATCH v2 2/3] app/testpmd: improve MAC swap performance for x86

Zhang, Qi Z qi.z.zhang at intel.com
Fri Dec 14 12:36:48 CET 2018



> -----Original Message-----
> From: Iremonger, Bernard
> Sent: Friday, December 14, 2018 7:22 PM
> To: Zhang, Qi Z <qi.z.zhang at intel.com>; Yigit, Ferruh <ferruh.yigit at intel.com>;
> Richardson, Bruce <bruce.richardson at intel.com>; Wiles, Keith
> <keith.wiles at intel.com>; Ananyev, Konstantin <konstantin.ananyev at intel.com>
> Cc: dev at dpdk.org; Lu, Wenzhuo <wenzhuo.lu at intel.com>
> Subject: RE: [PATCH v2 2/3] app/testpmd: improve MAC swap performance for
> x86
> 
> Hi Qi,
> 
> > -----Original Message-----
> > From: Zhang, Qi Z
> > Sent: Tuesday, December 11, 2018 5:55 AM
> > To: Yigit, Ferruh <ferruh.yigit at intel.com>; Richardson, Bruce
> > <bruce.richardson at intel.com>; Wiles, Keith <keith.wiles at intel.com>;
> > Ananyev, Konstantin <konstantin.ananyev at intel.com>
> > Cc: dev at dpdk.org; Lu, Wenzhuo <wenzhuo.lu at intel.com>; Iremonger,
> > Bernard <bernard.iremonger at intel.com>; Zhang, Qi Z
> > <qi.z.zhang at intel.com>
> > Subject: [PATCH v2 2/3] app/testpmd: improve MAC swap performance for
> > x86
> >
> > The patch optimizes the mac swap operation by taking advantage of SSE
> > instructions, it only impacts x86 platform.
> >
> > Signed-off-by: Qi Zhang <qi.z.zhang at intel.com>
> > ---
> >  app/test-pmd/macswap.c        |  4 ++++
> >  app/test-pmd/macswap_common.h |  1 -
> >  app/test-pmd/macswap_sse.h    | 45
> > +++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 49 insertions(+), 1 deletion(-)  create mode 100644
> > app/test- pmd/macswap_sse.h
> >
> > diff --git a/app/test-pmd/macswap.c b/app/test-pmd/macswap.c index
> > 849194fe2..cbb41b728 100644
> > --- a/app/test-pmd/macswap.c
> > +++ b/app/test-pmd/macswap.c
> > @@ -66,7 +66,11 @@
> >  #include <rte_flow.h>
> >
> >  #include "testpmd.h"
> > +#ifdef RTE_ARCH_X86
> > +#include "macswap_sse.h"
> > +#else
> >  #include "macswap.h"
> > +#endif
> >
> >  /*
> >   * MAC swap forwarding mode: Swap the source and the destination
> > Ethernet diff --git a/app/test-pmd/macswap_common.h b/app/test-
> > pmd/macswap_common.h index ab0a5b5ef..8c5518596 100644
> > --- a/app/test-pmd/macswap_common.h
> > +++ b/app/test-pmd/macswap_common.h
> > @@ -44,4 +44,3 @@ mbuf_field_set(struct rte_mbuf *mb, uint64_t
> > ol_flags) }
> >
> >  #endif /* _BPF_CMD_H_ */
> > -
> > diff --git a/app/test-pmd/macswap_sse.h b/app/test-pmd/macswap_sse.h
> > new file mode 100644 index 000000000..79f4f9a7c
> > --- /dev/null
> > +++ b/app/test-pmd/macswap_sse.h
> > @@ -0,0 +1,45 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2018 Intel Corporation  */
> > +
> > +#ifndef _L2FWD_SSE_H_
> > +#define _L2FWD_SSE_H_
> 
> _L2FWD_SSE_H_  should be replaced by _MACSWAP_SSE_H_  in the lines
> above.

Yes, during re-work, I saw this and EOF issue also, will fix

> 
> > +
> > +#include "macswap_common.h"
> > +
> > +static inline void
> > +do_macswap(struct rte_mbuf *pkts[], uint16_t nb,
> > +		struct rte_port *txp)
> > +{
> > +	struct ether_hdr *eth_hdr;
> > +	struct rte_mbuf *mb;
> > +	uint64_t ol_flags;
> > +	int i;
> > +	__m128i addr;
> 
> Some comments explaining the parameters to _mm_set_epi8() would be useful.

OK, will add.

Thanks
Qi

> 
> > +	__m128i shfl_msk = _mm_set_epi8(15, 14, 13, 12,
> > +					5, 4, 3, 2,
> > +					1, 0, 11, 10,
> > +					9, 8, 7, 6);
> > +
> > +	ol_flags = ol_flags_init(txp->dev_conf.txmode.offloads);
> > +	vlan_qinq_set(pkts, nb, ol_flags,
> > +			txp->tx_vlan_id, txp->tx_vlan_id_outer);
> > +
> > +	for (i = 0; i < nb; i++) {
> > +		if (likely(i < nb - 1))
> > +			rte_prefetch0(rte_pktmbuf_mtod(pkts[i+1], void
> > *));
> > +		mb = pkts[i];
> > +
> > +		eth_hdr = rte_pktmbuf_mtod(mb, struct ether_hdr *);
> > +
> > +		/* Swap dest and src mac addresses. */
> > +		addr = _mm_loadu_si128((__m128i *)eth_hdr);
> > +		addr = _mm_shuffle_epi8(addr, shfl_msk);
> > +		_mm_storeu_si128((__m128i *)eth_hdr, addr);
> > +
> > +		mbuf_field_set(mb, ol_flags);
> > +	}
> > +}
> > +
> > +#endif /* _BPF_CMD_H_ */
> 
> _BPF_CMD_H should be replaced by _MACSWAP_SSE_H_ in the line above.
> 
> > +
> > --
> > 2.13.6
> 
> A white space error is reported when applying this patch
> 
> Applying: app/testpmd: improve MAC swap performance for x86
> .git/rebase-apply/patch:83: new blank line at EOF.
> 
> Regards,
> 
> Bernard.
> 



More information about the dev mailing list