[dpdk-dev] [PATCH v4] app/testpmd: add option ring-bind-lcpu to bind Q with CPU

wei.guo.simon at gmail.com wei.guo.simon at gmail.com
Wed Jan 10 08:59:37 CET 2018


From: Simon Guo <wei.guo.simon at gmail.com>

Currently the rx/tx queue is allocated from the buffer pool on socket of:
- port's socket if --port-numa-config specified
- or ring-numa-config setting per port

All the above will "bind" queue to single socket per port configuration.
But it can actually archieve better performance if one port's queue can
be spread across multiple NUMA nodes, and the rx/tx queue is allocated
per lcpu socket.

This patch adds a new option "--ring-bind-lcpu"(no parameter).  With
this, testpmd can utilize the PCI-e bus bandwidth on another NUMA
nodes.

When --port-numa-config or --ring-numa-config option is specified, this
--ring-bind-lcpu option will be suppressed.

Test result:
64bytes package, running in PowerPC with Mellanox
CX-4 card, single port(100G), with 8 cores, fw mode:
- Without this patch:  52.5Mpps throughput
- With this patch: 66Mpps throughput
      ~25% improvement

Signed-off-by: Simon Guo <wei.guo.simon at gmail.com>
---
 app/test-pmd/parameters.c |  14 +++++-
 app/test-pmd/testpmd.c    | 112 +++++++++++++++++++++++++++++++++-------------
 app/test-pmd/testpmd.h    |   7 +++
 3 files changed, 101 insertions(+), 32 deletions(-)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 304b98d..1dba92e 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -104,6 +104,10 @@
 	       "(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
 	printf("  --socket-num=N: set socket from which all memory is allocated "
 	       "in NUMA mode.\n");
+	printf("  --ring-bind-lcpu: "
+		"specify TX/RX rings will be allocated on local socket of lcpu."
+		"It will be ignored if ring-numa-config or port-numa-config is used. "
+		"As a result, it allows one port binds to multiple NUMA nodes.\n");
 	printf("  --mbuf-size=N: set the data size of mbuf to N bytes.\n");
 	printf("  --total-num-mbufs=N: set the number of mbufs to be allocated "
 	       "in mbuf pools.\n");
@@ -544,6 +548,7 @@
 		{ "interactive",		0, 0, 0 },
 		{ "cmdline-file",		1, 0, 0 },
 		{ "auto-start",			0, 0, 0 },
+		{ "ring-bind-lcpu",		0, 0, 0 },
 		{ "eth-peers-configfile",	1, 0, 0 },
 		{ "eth-peer",			1, 0, 0 },
 #endif
@@ -676,6 +681,10 @@
 				stats_period = n;
 				break;
 			}
+			if (!strcmp(lgopts[opt_idx].name, "ring-bind-lcpu")) {
+				ring_bind_lcpu |= RBL_BIND_LOCAL_MASK;
+				break;
+			}
 			if (!strcmp(lgopts[opt_idx].name,
 				    "eth-peers-configfile")) {
 				if (init_peer_eth_addrs(optarg) != 0)
@@ -739,11 +748,14 @@
 				if (parse_portnuma_config(optarg))
 					rte_exit(EXIT_FAILURE,
 					   "invalid port-numa configuration\n");
+				ring_bind_lcpu |= RBL_PORT_NUMA_MASK;
 			}
-			if (!strcmp(lgopts[opt_idx].name, "ring-numa-config"))
+			if (!strcmp(lgopts[opt_idx].name, "ring-numa-config")) {
 				if (parse_ringnuma_config(optarg))
 					rte_exit(EXIT_FAILURE,
 					   "invalid ring-numa configuration\n");
+				ring_bind_lcpu |= RBL_RING_NUMA_MASK;
+			}
 			if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
 				n = atoi(optarg);
 				if (!new_socket_id((uint8_t)n)) {
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 9414d0e..e9e89d0 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -68,6 +68,9 @@
 uint8_t interactive = 0;
 uint8_t auto_start = 0;
 uint8_t tx_first;
+
+uint8_t ring_bind_lcpu;
+
 char cmdline_filename[PATH_MAX] = {0};
 
 /*
@@ -1410,6 +1413,43 @@ static int eth_event_callback(portid_t port_id,
 	return 1;
 }
 
+static int find_local_socket(queueid_t qi, int is_rxq)
+{
+	/*
+	 * try to find the local socket with following logic:
+	 * 1) Find the correct stream for the queue;
+	 * 2) Find the correct lcore for the stream;
+	 * 3) Find the correct socket for the lcore;
+	 */
+	int i, j, socket = NUMA_NO_CONFIG;
+
+	/* find the stream based on queue no*/
+	for (i = 0; i < nb_fwd_streams; i++) {
+		if (is_rxq) {
+			if (fwd_streams[i]->rx_queue == qi)
+				break;
+		} else {
+			if (fwd_streams[i]->tx_queue == qi)
+				break;
+		}
+	}
+	if (i == nb_fwd_streams)
+		return NUMA_NO_CONFIG;
+
+	/* find the lcore based on stream idx */
+	for (j = 0; j < nb_lcores; j++) {
+		if (fwd_lcores[j]->stream_idx == i)
+			break;
+	}
+	if (j == nb_lcores)
+		return NUMA_NO_CONFIG;
+
+	/* find the socket for the lcore */
+	socket = rte_lcore_to_socket_id(fwd_lcores_cpuids[j]);
+
+	return socket;
+}
+
 int
 start_port(portid_t pid)
 {
@@ -1469,14 +1509,18 @@ static int eth_event_callback(portid_t port_id,
 			port->need_reconfig_queues = 0;
 			/* setup tx queues */
 			for (qi = 0; qi < nb_txq; qi++) {
+				int socket = port->socket_id;
 				if ((numa_support) &&
 					(txring_numa[pi] != NUMA_NO_CONFIG))
-					diag = rte_eth_tx_queue_setup(pi, qi,
-						nb_txd,txring_numa[pi],
-						&(port->tx_conf));
-				else
-					diag = rte_eth_tx_queue_setup(pi, qi,
-						nb_txd,port->socket_id,
+					socket = txring_numa[pi];
+				else if (ring_bind_lcpu) {
+					int ret = find_local_socket(qi, 0);
+					if (ret != NUMA_NO_CONFIG)
+						socket = ret;
+				}
+
+				diag = rte_eth_tx_queue_setup(pi, qi,
+						nb_txd, socket,
 						&(port->tx_conf));
 
 				if (diag == 0)
@@ -1495,35 +1539,28 @@ static int eth_event_callback(portid_t port_id,
 			}
 			/* setup rx queues */
 			for (qi = 0; qi < nb_rxq; qi++) {
+				int socket = port->socket_id;
 				if ((numa_support) &&
-					(rxring_numa[pi] != NUMA_NO_CONFIG)) {
-					struct rte_mempool * mp =
-						mbuf_pool_find(rxring_numa[pi]);
-					if (mp == NULL) {
-						printf("Failed to setup RX queue:"
-							"No mempool allocation"
-							" on the socket %d\n",
-							rxring_numa[pi]);
-						return -1;
-					}
-
-					diag = rte_eth_rx_queue_setup(pi, qi,
-					     nb_rxd,rxring_numa[pi],
-					     &(port->rx_conf),mp);
-				} else {
-					struct rte_mempool *mp =
-						mbuf_pool_find(port->socket_id);
-					if (mp == NULL) {
-						printf("Failed to setup RX queue:"
+					(rxring_numa[pi] != NUMA_NO_CONFIG))
+					socket = rxring_numa[pi];
+				else if (ring_bind_lcpu) {
+					int ret = find_local_socket(qi, 1);
+					if (ret != NUMA_NO_CONFIG)
+						socket = ret;
+				}
+
+				struct rte_mempool *mp =
+					mbuf_pool_find(socket);
+				if (mp == NULL) {
+					printf("Failed to setup RX queue:"
 							"No mempool allocation"
 							" on the socket %d\n",
-							port->socket_id);
-						return -1;
-					}
-					diag = rte_eth_rx_queue_setup(pi, qi,
-					     nb_rxd,port->socket_id,
-					     &(port->rx_conf), mp);
+							socket);
+					return -1;
 				}
+				diag = rte_eth_rx_queue_setup(pi, qi,
+						nb_rxd, socket,
+						&(port->rx_conf), mp);
 				if (diag == 0)
 					continue;
 
@@ -2414,6 +2451,19 @@ uint8_t port_is_bonding_slave(portid_t slave_pid)
 		       "but nb_txq=%d will prevent to fully test it.\n",
 		       nb_rxq, nb_txq);
 
+	if (ring_bind_lcpu & RBL_BIND_LOCAL_MASK) {
+		if (ring_bind_lcpu &
+				(RBL_RING_NUMA_MASK | RBL_PORT_NUMA_MASK)) {
+			printf("ring-bind-lcpu option is suppressed by "
+					"ring-numa-config or port-numa-config option\n");
+			ring_bind_lcpu = 0;
+		} else {
+			printf("RingBuffer bind with local CPU selected\n");
+			ring_bind_lcpu = 1;
+		}
+	} else
+		ring_bind_lcpu = 0;
+
 	init_config();
 	if (start_port(RTE_PORT_ALL) != 0)
 		rte_exit(EXIT_FAILURE, "Start ports failed\n");
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 2a266fd..99e55b2 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -328,6 +328,13 @@ struct queue_stats_mappings {
 extern uint8_t  interactive;
 extern uint8_t  auto_start;
 extern uint8_t  tx_first;
+
+/* for --ring-bind-lcpu option checking, RBL means Ring Bind Lcpu related */
+#define RBL_BIND_LOCAL_MASK (1 << 0)
+#define RBL_RING_NUMA_MASK  (1 << 1)
+#define RBL_PORT_NUMA_MASK  (1 << 2)
+extern uint8_t  ring_bind_lcpu;
+
 extern char cmdline_filename[PATH_MAX]; /**< offline commands file */
 extern uint8_t  numa_support; /**< set by "--numa" parameter */
 extern uint16_t port_topology; /**< set by "--port-topology" parameter */
-- 
1.8.3.1



More information about the dev mailing list