[dpdk-dev] [PATCH v3 1/6] net/ixgbevf: unregister irq handler when other interrupts not allowed.

Tonghao Zhang xiangxia.m.yue at gmail.com
Wed Jan 17 02:38:11 CET 2018


On Mon, Jan 15, 2018 at 4:57 PM, Tonghao Zhang <xiangxia.m.yue at gmail.com> wrote:
> On Mon, Jan 15, 2018 at 12:57 PM, Dai, Wei <wei.dai at intel.com> wrote:
>>> -----Original Message-----
>>> From: xiangxia.m.yue at gmail.com [mailto:xiangxia.m.yue at gmail.com]
>>> Sent: Sunday, January 14, 2018 6:04 PM
>>> To: Dai, Wei <wei.dai at intel.com>; Xing, Beilei <beilei.xing at intel.com>
>>> Cc: dev at dpdk.org; Tonghao Zhang <xiangxia.m.yue at gmail.com>
>>> Subject: [PATCH v3 1/6] net/ixgbevf: unregister irq handler when other
>>> interrupts not allowed.
>>>
>>> From: Tonghao Zhang <xiangxia.m.yue at gmail.com>
>>>
>>> When bind the ixgbe VF (e.g 82599 card) to igb_uio and enable the
>>> rx-interrupt, there will be more than one epoll_wait on intr_handle.fd.
>>> One is in "eal-intr-thread" thread, and the others are in the thread which call
>>> the "rte_epoll_wait". The problem is that sometimes "eal-intr-thread" thread
>>> will process the rx interrupt, and then rte_epoll_wait can't get the event
>>> anymore, and the packets may be lost.
>>>
>>> The patch unregister the status interrupt handler in "eal-intr-thread"
>>> thread and the ixgbe pf is in the same case.
>>>
>>> Signed-off-by: Tonghao Zhang <xiangxia.m.yue at gmail.com>
>>> Acked-by: Beilei Xing <beilei.xing at intel.com>
>> In my feedback to your v2 version of this patch, I mentioned miscellaneous interrupt
>> need to be handled in eal-intr-thread.
>> Your patch removes the handler of PF->VF reset event and leads to missing of
>> this event.
>> My suggestion is still using VFIO-PCI instead of igb_uio for rx-queue interrupt.
> I got it, Thanks for your review.
Hi wei, beilei,
The patches in the patchset have no dependency. Can you help me to
review other patches ?

>>
>>> ---
>>>  drivers/net/ixgbe/ixgbe_ethdev.c | 15 +++++++++++++++
>>>  1 file changed, 15 insertions(+)
>>>
>>> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
>>> b/drivers/net/ixgbe/ixgbe_ethdev.c
>>> index ff19a56..0e056a2 100644
>>> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
>>> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>>> @@ -5078,6 +5078,15 @@ static int
>>> ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
>>>       }
>>>       ixgbevf_configure_msix(dev);
>>>
>>> +     if (!rte_intr_allow_others(intr_handle)) {
>>> +             rte_intr_callback_unregister(intr_handle,
>>> +                                          ixgbevf_dev_interrupt_handler,
>>> +                                          dev);
>>> +             if (dev->data->dev_conf.intr_conf.lsc != 0)
>>> +                     PMD_INIT_LOG(INFO, "lsc won't enable because of"
>>> +                                  " no intr multiplex");
>>> +     }
>>> +
>>>       /* When a VF port is bound to VFIO-PCI, only miscellaneous interrupt
>>>        * is mapped to VFIO vector 0 in eth_ixgbevf_dev_init( ).
>>>        * If previous VFIO interrupt mapping setting in eth_ixgbevf_dev_init( )
>>> @@ -5120,6 +5129,12 @@ static int
>>> ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
>>>
>>>       ixgbe_dev_clear_queues(dev);
>>>
>>> +     if (!rte_intr_allow_others(intr_handle))
>>> +             /* resume to the default handler */
>>> +             rte_intr_callback_register(intr_handle,
>>> +                                        ixgbevf_dev_interrupt_handler,
>>> +                                        (void *)dev);
>>> +
>>>       /* Clean datapath event and queue/vec mapping */
>>>       rte_intr_efd_disable(intr_handle);
>>>       if (intr_handle->intr_vec != NULL) {
>>> --
>>> 1.8.3.1
>>


More information about the dev mailing list