[dpdk-dev] [PATCH] net/tap: set queue started and stopped

[Wiles, Keith]

> On Jul 9, 2018, at 3:20 PM, Eads, Gage <gage.eads at intel.com> wrote:
> 
> Set the rx and tx queue state appropriately when the queues or device are
> started or stopped.
> 
> Signed-off-by: Gage Eads <gage.eads at intel.com>
> ---
> drivers/net/tap/rte_eth_tap.c | 56 +++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 54 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
> index df396bfde..c3250da63 100644
> --- a/drivers/net/tap/rte_eth_tap.c
> +++ b/drivers/net/tap/rte_eth_tap.c
> @@ -641,12 +641,22 @@ tap_link_set_up(struct rte_eth_dev *dev)
> static int
> tap_dev_start(struct rte_eth_dev *dev)
> {
> -	int err;
> +	int err, i;
> 
> 	err = tap_intr_handle_set(dev, 1);
> 	if (err)
> 		return err;
> -	return tap_link_set_up(dev);
> +
> +	err = tap_link_set_up(dev);
> +	if (err)
> +		return err;
> +
> +	for (i = 0; i < dev->data->nb_tx_queues; i++)
> +		dev->data->tx_queue_state[i] = RTE_ETH_QUEUE_STATE_STARTED;
> +	for (i = 0; i < dev->data->nb_rx_queues; i++)
> +		dev->data->rx_queue_state[i] = RTE_ETH_QUEUE_STATE_STARTED;
> +
> +	return err;
> }
> 
> /* This function gets called when the current port gets stopped.
> @@ -654,6 +664,13 @@ tap_dev_start(struct rte_eth_dev *dev)
> static void
> tap_dev_stop(struct rte_eth_dev *dev)
> {
> +	int i;
> +
> +	for (i = 0; i < dev->data->nb_tx_queues; i++)
> +		dev->data->tx_queue_state[i] = RTE_ETH_QUEUE_STATE_STOPPED;
> +	for (i = 0; i < dev->data->nb_rx_queues; i++)
> +		dev->data->rx_queue_state[i] = RTE_ETH_QUEUE_STATE_STOPPED;
> +
> 	tap_intr_handle_set(dev, 0);
> 	tap_link_set_down(dev);
> }
> @@ -1342,6 +1359,37 @@ tap_rss_hash_update(struct rte_eth_dev *dev,
> 	return 0;
> }
> 
> +static int
> +tap_rx_queue_start(struct rte_eth_dev *dev, uint16_t rx_queue_id)
> +{
> +	dev->data->rx_queue_state[rx_queue_id] = RTE_ETH_QUEUE_STATE_STARTED;

We need to verify the rx_queue_id is valid before setting the state.

if (rx_queue_id < dev->data>nb_rx_queues)
	dev->data->rx_queue_state[rx_queue_id] = RTE_ETH_QUEUE_STATE_STARTED;
else
	return -1;

This needs to be done for each of these routines.

> +
> +	return 0;
> +}
> +
> +static int
> +tap_tx_queue_start(struct rte_eth_dev *dev, uint16_t tx_queue_id)
> +{
> +	dev->data->tx_queue_state[tx_queue_id] = RTE_ETH_QUEUE_STATE_STARTED;
> +
> +	return 0;
> +}
> +
> +static int
> +tap_rx_queue_stop(struct rte_eth_dev *dev, uint16_t rx_queue_id)
> +{
> +	dev->data->rx_queue_state[rx_queue_id] = RTE_ETH_QUEUE_STATE_STOPPED;
> +
> +	return 0;
> +}
> +
> +static int
> +tap_tx_queue_stop(struct rte_eth_dev *dev, uint16_t tx_queue_id)
> +{
> +	dev->data->tx_queue_state[tx_queue_id] = RTE_ETH_QUEUE_STATE_STOPPED;
> +
> +	return 0;
> +}
> static const struct eth_dev_ops ops = {
> 	.dev_start              = tap_dev_start,
> 	.dev_stop               = tap_dev_stop,
> @@ -1350,6 +1398,10 @@ static const struct eth_dev_ops ops = {
> 	.dev_infos_get          = tap_dev_info,
> 	.rx_queue_setup         = tap_rx_queue_setup,
> 	.tx_queue_setup         = tap_tx_queue_setup,
> +	.rx_queue_start         = tap_rx_queue_start,
> +	.tx_queue_start         = tap_tx_queue_start,
> +	.rx_queue_stop          = tap_rx_queue_stop,
> +	.tx_queue_stop          = tap_tx_queue_stop,
> 	.rx_queue_release       = tap_rx_queue_release,
> 	.tx_queue_release       = tap_tx_queue_release,
> 	.flow_ctrl_get          = tap_flow_ctrl_get,
> -- 
> 2.13.6
> 

Regards,
Keith