[dpdk-dev] [PATCH] net/thunderx: add support for hardware first skip feature
Jerin Jacob
jerin.jacob at caviumnetworks.com
Mon Jun 11 14:45:14 CEST 2018
-----Original Message-----
> Date: Mon, 28 May 2018 18:27:04 +0530
> From: rkudurumalla <rkudurumalla at caviumnetworks.com>
> To: dev at dpdk.org
> CC: Rakesh Kudurumalla <rkudurumalla at caviumnetworks.com>
> Subject: [dpdk-dev] [PATCH] net/thunderx: add support for hardware first
> skip feature
> X-Mailer: git-send-email 2.7.4
>
> This feature is used to create a hole between HEADROOM
> and actual data.Size of hole is specified in bytes as
> module param to pmd
>
> Signed-off-by: Rakesh Kudurumalla <rkudurumalla at caviumnetworks.com>
> ---
> doc/guides/nics/thunderx.rst | 26 ++++++++++++
> drivers/net/thunderx/base/nicvf_hw.c | 12 ++++++
> drivers/net/thunderx/base/nicvf_hw.h | 1 +
> drivers/net/thunderx/nicvf_ethdev.c | 76 +++++++++++++++++++++++++++++++++++-
> drivers/net/thunderx/nicvf_ethdev.h | 1 +
> drivers/net/thunderx/nicvf_struct.h | 1 +
> 6 files changed, 116 insertions(+), 1 deletion(-)
>
> diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst
> index 2642374..3d68c61 100644
> --- a/doc/guides/nics/thunderx.rst
> +++ b/doc/guides/nics/thunderx.rst
> @@ -30,6 +30,7 @@ Features of the ThunderX PMD are:
> - SR-IOV VF
> - NUMA support
> - Multi queue set support (up to 96 queues (12 queue sets)) per port
> +- First skip support
>
> Supported ThunderX SoCs
> -----------------------
> @@ -312,6 +313,26 @@ We will choose four secondary queue sets from the ending of the list (0002:01:01
>
> The nicvf thunderx driver will make use of attached secondary VFs automatically during the interface configuration stage.
>
> +
> +# Module params
> +
> + This feature is used to create a hole between HEADROOM and actual data.
> + Size of hole is specified in bytes as module param to pmd.
> +
This "Module params" comes under "32.6.3. Example device binding", Which
is not correct.
> +Configuration and Options
> +-------------------------
Change the "Configuration and Options" to "Module params" section.
Add sub section called "skip_data_bytes". The above sentence can be
copied here. i.e
---
This feature is used to create a hole between HEADROOM and actual
data.Size of hole is specified in bytes as module
param("skip_data_bytes") to pmd.
This scheme is useful when application would like to
insert vlan header without disturbing HEADROOM
> + Use ``-w pci_id,skip_data_bytes="number of bytes to skip"`` in the EAL options
> + Example:
> +
> + .. code-block:: console
This section is not rendering correctly.
Please use "make doc-guides-html" to see the rendered output on the
local PC @ dpdk_dir/build/doc/...
> +
> + ./your_application -w pci_id=skip_data_bytes=bytes_to_skip
> +
> + Ex: ./build/app/testpmd -w 0001:01:00.1,skip_data_bytes=8 -- --rxq=1 --txq=1 --nb-cores=1 --port-topology=chained -i -- -c 0x1
> + This will create a hole of 8 bytes between HEADROOM and actual data.
> +
> + Use case: The hole created with first_skip can be used to insert vlan header without disturbing HEADROOM
Remove this as it mentioned above.
> +
> Limitations
> -----------
>
> @@ -335,3 +356,8 @@ Maximum packet segments
> The ThunderX SoC family NICs support up to 12 segments per packet when working
> in scatter/gather mode. So, setting MTU will result with ``EINVAL`` when the
> frame size does not fit in the maximum number of segments.
> +
> +First_skip
> +~~~~~~~~~~
> +
> +Maximum limit on first_skip is 128 bytes and number of bytes should be multiple of 8
period(.) is missing at the end.
> diff --git a/drivers/net/thunderx/base/nicvf_hw.c b/drivers/net/thunderx/base/nicvf_hw.c
> index ea8092c..b07a293 100644
> --- a/drivers/net/thunderx/base/nicvf_hw.c
> +++ b/drivers/net/thunderx/base/nicvf_hw.c
> @@ -703,6 +703,18 @@ nicvf_vlan_hw_strip(struct nicvf *nic, bool enable)
> }
>
> void
> +nicvf_first_skip_config(struct nicvf *nic, uint8_t num_dwords)
> +{
> + uint64_t val;
> +
> + val = nicvf_reg_read(nic, NIC_VNIC_RQ_GEN_CFG);
> + val &= ~(0xfULL);
> + val |= (num_dwords & 0xf);
> +
> + nicvf_reg_write(nic, NIC_VNIC_RQ_GEN_CFG, val);
> +}
> +
> +void
> nicvf_apad_config(struct nicvf *nic, bool enable)
> {
> uint64_t val;
> diff --git a/drivers/net/thunderx/base/nicvf_hw.h b/drivers/net/thunderx/base/nicvf_hw.h
> index 284d0bd..fd13ea8 100644
> --- a/drivers/net/thunderx/base/nicvf_hw.h
> +++ b/drivers/net/thunderx/base/nicvf_hw.h
> @@ -193,6 +193,7 @@ uint32_t nicvf_qsize_sq_roundup(uint32_t val);
> void nicvf_vlan_hw_strip(struct nicvf *nic, bool enable);
>
> void nicvf_apad_config(struct nicvf *nic, bool enable);
> +void nicvf_first_skip_config(struct nicvf *nic, uint8_t dwords);
>
> int nicvf_rss_config(struct nicvf *nic, uint32_t qcnt, uint64_t cfg);
> int nicvf_rss_term(struct nicvf *nic);
> diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
> index 99fcd51..466cb86 100644
> --- a/drivers/net/thunderx/nicvf_ethdev.c
> +++ b/drivers/net/thunderx/nicvf_ethdev.c
> @@ -34,6 +34,8 @@
> #include <rte_pci.h>
> #include <rte_bus_pci.h>
> #include <rte_tailq.h>
> +#include <rte_devargs.h>
> +#include <rte_kvargs.h>
add it in alphabetical order.
>
> #include "base/nicvf_plat.h"
>
> @@ -1230,6 +1232,7 @@ nicvf_rxq_mbuf_setup(struct nicvf_rxq *rxq)
> {
> uintptr_t p;
> struct rte_mbuf mb_def;
> + struct nicvf *nic = rxq->nic;
>
> RTE_BUILD_BUG_ON(sizeof(union mbuf_initializer) != 8);
> RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, data_off) % 8 != 0);
> @@ -1240,7 +1243,7 @@ nicvf_rxq_mbuf_setup(struct nicvf_rxq *rxq)
> RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, port) -
> offsetof(struct rte_mbuf, data_off) != 6);
> mb_def.nb_segs = 1;
> - mb_def.data_off = RTE_PKTMBUF_HEADROOM;
> + mb_def.data_off = RTE_PKTMBUF_HEADROOM + (nic->skip_bytes);
> mb_def.port = rxq->port_id;
> rte_mbuf_refcnt_set(&mb_def, 1);
>
> @@ -1260,9 +1263,19 @@ nicvf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
> struct nicvf_rxq *rxq;
> struct nicvf *nic = nicvf_pmd_priv(dev);
> uint64_t offloads;
> + uint32_t buffsz;
> + struct rte_pktmbuf_pool_private *mbp_priv;
>
> PMD_INIT_FUNC_TRACE();
>
> + /* First skip check */
> + mbp_priv = rte_mempool_get_priv(mp);
> + buffsz = mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM;
> + if (buffsz < (uint32_t)(nic->skip_bytes)) {
> + PMD_INIT_LOG(ERR, "First skip is more than configured buffer size");
> + return -EINVAL;
> + }
> +
> if (qidx >= MAX_RCV_QUEUES_PER_QS)
> nic = nic->snicvf[qidx / MAX_RCV_QUEUES_PER_QS - 1];
>
> @@ -1298,6 +1311,7 @@ nicvf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
> return -EINVAL;
> }
>
> +
> /* Check rx_free_thresh upper bound */
> rx_free_thresh = (uint16_t)((rx_conf->rx_free_thresh) ?
> rx_conf->rx_free_thresh :
> @@ -1498,6 +1512,7 @@ nicvf_vf_start(struct rte_eth_dev *dev, struct nicvf *nic, uint32_t rbdrsz)
> return -EINVAL;
> }
> rxq->mbuf_phys_off -= data_off;
> + rxq->mbuf_phys_off -= nic->skip_bytes;
>
> if (mbuf_phys_off == 0)
> mbuf_phys_off = rxq->mbuf_phys_off;
> @@ -1978,6 +1993,59 @@ static const struct eth_dev_ops nicvf_eth_dev_ops = {
> .get_reg = nicvf_dev_get_regs,
> };
>
> +static inline int
> +nicvf_set_first_skip(struct rte_eth_dev *dev)
> +{
> + int bytes_to_skip = 0;
> + int ret = 0;
> + unsigned int i;
> + struct rte_kvargs *kvlist;
> + static const char *const skip[] = {
> + SKIP_DATA_BYTES,
> + NULL};
> + struct nicvf *nic = nicvf_pmd_priv(dev);
> +
> + if (!dev->device->devargs) {
> + nicvf_first_skip_config(nic, 0);
> + return ret;
> + }
> +
> + kvlist = rte_kvargs_parse(dev->device->devargs->args, skip);
> + if (!kvlist)
> + return -EINVAL;
> +
> + if (kvlist->count == 0)
> + goto exit;
> +
> + for (i = 0; i != kvlist->count; ++i) {
> + const struct rte_kvargs_pair *pair = &kvlist->pairs[i];
> +
> + if (!strcmp(pair->key, SKIP_DATA_BYTES))
> + bytes_to_skip = atoi(pair->value);
> + }
> +
> + /*128 bytes amounts to one cache line*/
Bad comment alignment.
> + if (bytes_to_skip >= 0 && bytes_to_skip < 128) {
> + if (!(bytes_to_skip % 8)) {
> + nicvf_first_skip_config(nic, (bytes_to_skip / 8));
> + nic->skip_bytes = bytes_to_skip;
> + goto kvlist_free;
> + } else {
> + PMD_INIT_LOG(ERR, "skip_data_bytes should be multiple of 8");
> + ret = -EINVAL;
> + goto exit;
> + }
> + } else {
> + PMD_INIT_LOG(ERR, "skip_data_bytes should be less than 128");
> + ret = -EINVAL;
> + goto exit;
> + }
> +exit:
> + nicvf_first_skip_config(nic, 0);
> +kvlist_free:
> + rte_kvargs_free(kvlist);
> + return ret;
> +}
> static int
> nicvf_eth_dev_init(struct rte_eth_dev *eth_dev)
> {
> @@ -2087,6 +2155,11 @@ nicvf_eth_dev_init(struct rte_eth_dev *eth_dev)
> goto malloc_fail;
> }
>
> + ret = nicvf_set_first_skip(eth_dev);
> + if (ret) {
> + PMD_INIT_LOG(ERR, "Failed to configure first skip");
> + goto malloc_fail;
> + }
> PMD_INIT_LOG(INFO, "Port %d (%x:%x) mac=%02x:%02x:%02x:%02x:%02x:%02x",
> eth_dev->data->port_id, nic->vendor_id, nic->device_id,
> nic->mac_addr[0], nic->mac_addr[1], nic->mac_addr[2],
> @@ -2159,3 +2232,4 @@ static struct rte_pci_driver rte_nicvf_pmd = {
> RTE_PMD_REGISTER_PCI(net_thunderx, rte_nicvf_pmd);
> RTE_PMD_REGISTER_PCI_TABLE(net_thunderx, pci_id_nicvf_map);
> RTE_PMD_REGISTER_KMOD_DEP(net_thunderx, "* igb_uio | uio_pci_generic | vfio-pci");
> +RTE_PMD_REGISTER_PARAM_STRING(net_thunderx, SKIP_DATA_BYTES "=<int>");
> diff --git a/drivers/net/thunderx/nicvf_ethdev.h b/drivers/net/thunderx/nicvf_ethdev.h
> index ea8dccd..9af5088 100644
> --- a/drivers/net/thunderx/nicvf_ethdev.h
> +++ b/drivers/net/thunderx/nicvf_ethdev.h
> @@ -51,6 +51,7 @@
>
> #define VLAN_TAG_SIZE 4 /* 802.3ac tag */
>
> +#define SKIP_DATA_BYTES "skip_data_bytes"
> static inline struct nicvf *
> nicvf_pmd_priv(struct rte_eth_dev *eth_dev)
> {
> diff --git a/drivers/net/thunderx/nicvf_struct.h b/drivers/net/thunderx/nicvf_struct.h
> index d4a83c3..cf98f7c 100644
> --- a/drivers/net/thunderx/nicvf_struct.h
> +++ b/drivers/net/thunderx/nicvf_struct.h
> @@ -99,6 +99,7 @@ struct nicvf {
> struct rte_intr_handle intr_handle;
> uint8_t cpi_alg;
> uint16_t mtu;
> + int skip_bytes;
Since the value comes less than 256, use uint8_t
Other that it looks good to me.
> bool vlan_filter_en;
> uint8_t mac_addr[ETHER_ADDR_LEN];
> /* secondary queue set support */
> --
> 2.7.4
>
More information about the dev
mailing list