[dpdk-dev] [PATCH v2 19/20] net/mlx5: add flow MPLS item

[Nelio Laranjeiro]

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro at 6wind.com>
---
 drivers/net/mlx5/mlx5_flow.c | 77 +++++++++++++++++++++++++++++++++++-
 1 file changed, 76 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 636aaabe8..7aa4e6ed5 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -55,6 +55,7 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
 #define MLX5_FLOW_LAYER_VXLAN (1u << 12)
 #define MLX5_FLOW_LAYER_VXLAN_GPE (1u << 13)
 #define MLX5_FLOW_LAYER_GRE (1u << 14)
+#define MLX5_FLOW_LAYER_MPLS (1u << 15)
 
 /* Outer Masks. */
 #define MLX5_FLOW_LAYER_OUTER_L3 \
@@ -68,7 +69,7 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
 /* Tunnel masks. */
 #define MLX5_FLOW_LAYER_TUNNEL \
 	(MLX5_FLOW_LAYER_VXLAN | MLX5_FLOW_LAYER_VXLAN_GPE | \
-	 MLX5_FLOW_LAYER_GRE)
+	 MLX5_FLOW_LAYER_GRE | MLX5_FLOW_LAYER_MPLS)
 
 /* Inner Masks. */
 #define MLX5_FLOW_LAYER_INNER_L3 \
@@ -1589,6 +1590,77 @@ mlx5_flow_item_gre(const struct rte_flow_item *item,
 	return size;
 }
 
+/**
+ * Validate MPLS layer and possibly create the Verbs specification.
+ *
+ * @param dev
+ *   Pointer to Ethernet device.
+ * @param item[in]
+ *   Item specification.
+ * @param flow[in, out]
+ *   Pointer to flow structure.
+ * @param flow_size[in]
+ *   Size in bytes of the available space for to store the flow information.
+ * @param error
+ *   Pointer to error structure.
+ *
+ * @return
+ *   size in bytes necessary for the conversion, a negative errno value
+ *   otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_item_mpls(const struct rte_flow_item *item __rte_unused,
+		    struct rte_flow *flow __rte_unused,
+		    const size_t flow_size __rte_unused,
+		    struct rte_flow_error *error)
+{
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+	const struct rte_flow_item_mpls *spec = item->spec;
+	const struct rte_flow_item_mpls *mask = item->mask;
+	unsigned int size = sizeof(struct ibv_flow_spec_mpls);
+	struct ibv_flow_spec_mpls mpls = {
+		.type = IBV_FLOW_SPEC_MPLS,
+		.size = size,
+	};
+	const uint32_t layers = mlx5_flow_layers(flow);
+	int ret;
+
+	if (layers & MLX5_FLOW_LAYER_TUNNEL)
+		return rte_flow_error_set(error, ENOTSUP,
+					  RTE_FLOW_ERROR_TYPE_ITEM,
+					  item,
+					  "a tunnel is already"
+					  " present");
+	if (!mask)
+		mask = &rte_flow_item_mpls_mask;
+	ret = mlx5_flow_item_validate
+		(item, (const uint8_t *)mask,
+		 (const uint8_t *)&rte_flow_item_mpls_mask,
+		 sizeof(struct rte_flow_item_mpls), error);
+	if (ret < 0)
+		return ret;
+	if (spec) {
+		memcpy(&mpls.val.label, spec, sizeof(mpls.val.label));
+		memcpy(&mpls.mask.label, mask, sizeof(mpls.mask.label));
+		/* Remove unwanted bits from values.  */
+		mpls.val.label &= mpls.mask.label;
+	}
+	if (size <= flow_size)
+		mlx5_flow_spec_verbs_add(flow, &mpls, size);
+	mlx5_flow_layers_update(flow, MLX5_FLOW_LAYER_MPLS);
+	if (layers & MLX5_FLOW_LAYER_OUTER_L4_UDP)
+		flow->ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE | RTE_PTYPE_L4_UDP;
+	else
+		flow->ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE;
+	return size;
+#endif /* !HAVE_IBV_DEVICE_MPLS_SUPPORT */
+	return rte_flow_error_set(error, ENOTSUP,
+				  RTE_FLOW_ERROR_TYPE_ITEM,
+				  item,
+				  "MPLS is not supported by Verbs, please"
+				  " update.");
+}
+
 /**
  * Validate items provided by the user.
  *
@@ -1650,6 +1722,9 @@ mlx5_flow_items(struct rte_eth_dev *dev,
 		case RTE_FLOW_ITEM_TYPE_GRE:
 			ret = mlx5_flow_item_gre(items, flow, remain, error);
 			break;
+		case RTE_FLOW_ITEM_TYPE_MPLS:
+			ret = mlx5_flow_item_mpls(items, flow, remain, error);
+			break;
 		default:
 			return rte_flow_error_set(error, ENOTSUP,
 						  RTE_FLOW_ERROR_TYPE_ITEM,
-- 
2.18.0