[dpdk-dev] [PATCH v2 2/4] app/testpmd: add parameters for deferred queue setup

Zhang, Qi Z qi.z.zhang at intel.com
Thu Mar 15 15:31:00 CET 2018



> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Thursday, March 15, 2018 9:42 PM
> To: Zhang, Qi Z <qi.z.zhang at intel.com>; thomas at monjalon.net
> Cc: dev at dpdk.org; Xing, Beilei <beilei.xing at intel.com>; Wu, Jingjing
> <jingjing.wu at intel.com>; Lu, Wenzhuo <wenzhuo.lu at intel.com>
> Subject: RE: [dpdk-dev] [PATCH v2 2/4] app/testpmd: add parameters for
> deferred queue setup
> 
> 
> 
> > -----Original Message-----
> > From: Zhang, Qi Z
> > Sent: Thursday, March 15, 2018 3:58 AM
> > To: Ananyev, Konstantin <konstantin.ananyev at intel.com>;
> > thomas at monjalon.net
> > Cc: dev at dpdk.org; Xing, Beilei <beilei.xing at intel.com>; Wu, Jingjing
> > <jingjing.wu at intel.com>; Lu, Wenzhuo <wenzhuo.lu at intel.com>
> > Subject: RE: [dpdk-dev] [PATCH v2 2/4] app/testpmd: add parameters for
> > deferred queue setup
> >
> >
> >
> > > -----Original Message-----
> > > From: Ananyev, Konstantin
> > > Sent: Thursday, March 15, 2018 1:39 AM
> > > To: Zhang, Qi Z <qi.z.zhang at intel.com>; thomas at monjalon.net
> > > Cc: dev at dpdk.org; Xing, Beilei <beilei.xing at intel.com>; Wu, Jingjing
> > > <jingjing.wu at intel.com>; Lu, Wenzhuo <wenzhuo.lu at intel.com>; Zhang,
> > > Qi Z <qi.z.zhang at intel.com>
> > > Subject: RE: [dpdk-dev] [PATCH v2 2/4] app/testpmd: add parameters
> > > for deferred queue setup
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Qi Zhang
> > > > Sent: Friday, March 2, 2018 4:13 AM
> > > > To: thomas at monjalon.net
> > > > Cc: dev at dpdk.org; Xing, Beilei <beilei.xing at intel.com>; Wu,
> > > > Jingjing <jingjing.wu at intel.com>; Lu, Wenzhuo
> > > > <wenzhuo.lu at intel.com>; Zhang,
> > > Qi
> > > > Z <qi.z.zhang at intel.com>
> > > > Subject: [dpdk-dev] [PATCH v2 2/4] app/testpmd: add parameters for
> > > > deferred queue setup
> > > >
> > > > Add two parameters:
> > > > rxq-setup: set the number of RX queues be setup before device
> > > > started
> > > > txq-setup: set the number of TX queues be setup before device started.
> > >
> > > Not sure we do need these new parameters at all - in next patch you
> > > introduce ability to do queue_setup from command-line.
> > > Plus we already have an ability to do queue_stop/queue_start from
> > > command-line.
> > > I think that would be enough for testing.
> > > Konstantin
> >
> > Without these parameters, we can only reconfigure a queue after dev_start,
> but not the case that deferred configure a fresh queue.
> 
> We do have:
> port stop
> port config all (rxq|txq) (value)
> port start
> 
> If we'll add a new command to specify which queues should be deferred at
> dev_start - wouldn't that be enough?
> 
OK, that's what I want. thanks.
> 
> >
> > >
> > >
> > > >
> > > > Signed-off-by: Qi Zhang <qi.z.zhang at intel.com>
> > > > ---
> > > >  app/test-pmd/parameters.c             | 29
> > > +++++++++++++++++++++++++++++
> > > >  app/test-pmd/testpmd.c                |  8 ++++++--
> > > >  app/test-pmd/testpmd.h                |  2 ++
> > > >  doc/guides/testpmd_app_ug/run_app.rst | 12 ++++++++++++
> > > >  4 files changed, 49 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> > > > index 97d22b860..497259ee7 100644
> > > > --- a/app/test-pmd/parameters.c
> > > > +++ b/app/test-pmd/parameters.c
> > > > @@ -146,8 +146,12 @@ usage(char* progname)
> > > >  	printf("  --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
> > > >  	printf("  --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
> > > >  	printf("  --rxq=N: set the number of RX queues per port to
> > > > N.\n");
> > > > +	printf("  --rxq-setup=N: set the number of RX queues be setup
> before"
> > > > +	       "device start to N.\n");
> > > >  	printf("  --rxd=N: set the number of descriptors in RX rings to
> N.\n");
> > > >  	printf("  --txq=N: set the number of TX queues per port to
> > > > N.\n");
> > > > +	printf("  --txq-setup=N: set the number of TX queues be setup
> before"
> > > > +	       "device start to N.\n");
> > > >  	printf("  --txd=N: set the number of descriptors in TX rings to
> N.\n");
> > > >  	printf("  --burst=N: set the number of packets per burst to N.\n");
> > > >  	printf("  --mbcache=N: set the cache of mbuf memory pool to
> > > > N.\n"); @@ -596,7 +600,9 @@ launch_args_parse(int argc, char**
> argv)
> > > >  		{ "rss-ip",			0, 0, 0 },
> > > >  		{ "rss-udp",			0, 0, 0 },
> > > >  		{ "rxq",			1, 0, 0 },
> > > > +		{ "rxq-setup",			1, 0, 0 },
> > > >  		{ "txq",			1, 0, 0 },
> > > > +		{ "txq-setup",			1, 0, 0 },
> > > >  		{ "rxd",			1, 0, 0 },
> > > >  		{ "txd",			1, 0, 0 },
> > > >  		{ "burst",			1, 0, 0 },
> > > > @@ -933,6 +939,15 @@ launch_args_parse(int argc, char** argv)
> > > >  						  " >= 0 && <= %u\n", n,
> > > >  						  get_allowed_max_nb_rxq(&pid));
> > > >  			}
> > > > +			if (!strcmp(lgopts[opt_idx].name, "rxq-setup")) {
> > > > +				n = atoi(optarg);
> > > > +				if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
> > > > +					nb_rxq_setup = (queueid_t) n;
> > > > +				else
> > > > +					rte_exit(EXIT_FAILURE, "rxq-setup %d invalid -
> must
> > > be"
> > > > +						  " >= 0 && <= %u\n", n,
> > > > +						  get_allowed_max_nb_rxq(&pid));
> > > > +			}
> > > >  			if (!strcmp(lgopts[opt_idx].name, "txq")) {
> > > >  				n = atoi(optarg);
> > > >  				if (n >= 0 && check_nb_txq((queueid_t)n) == 0) @@
> > > -942,6 +957,15
> > > > @@ launch_args_parse(int argc, char** argv)
> > > >  						  " >= 0 && <= %u\n", n,
> > > >  						  get_allowed_max_nb_txq(&pid));
> > > >  			}
> > > > +			if (!strcmp(lgopts[opt_idx].name, "txq-setup")) {
> > > > +				n = atoi(optarg);
> > > > +				if (n >= 0 && check_nb_txq((queueid_t)n) == 0)
> > > > +					nb_txq_setup = (queueid_t) n;
> > > > +				else
> > > > +					rte_exit(EXIT_FAILURE, "txq-setup %d invalid -
> must
> > > be"
> > > > +						  " >= 0 && <= %u\n", n,
> > > > +						  get_allowed_max_nb_txq(&pid));
> > > > +			}
> > > >  			if (!nb_rxq && !nb_txq) {
> > > >  				rte_exit(EXIT_FAILURE, "Either rx or tx queues should
> "
> > > >  						"be non-zero\n");
> > > > @@ -1119,4 +1143,9 @@ launch_args_parse(int argc, char** argv)
> > > >  	/* Set offload configuration from command line parameters. */
> > > >  	rx_mode.offloads = rx_offloads;
> > > >  	tx_mode.offloads = tx_offloads;
> > > > +
> > > > +	if (nb_rxq_setup > nb_rxq)
> > > > +		nb_rxq_setup = nb_rxq;
> > > > +	if (nb_txq_setup > nb_txq)
> > > > +		nb_txq_setup = nb_txq;
> > > >  }
> > > > diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> > > > 46dc22c94..790e7359c 100644
> > > > --- a/app/test-pmd/testpmd.c
> > > > +++ b/app/test-pmd/testpmd.c
> > > > @@ -207,6 +207,10 @@ uint8_t dcb_test = 0;
> > > >   */
> > > >  queueid_t nb_rxq = 1; /**< Number of RX queues per port. */
> > > > queueid_t nb_txq = 1; /**< Number of TX queues per port. */
> > > > +queueid_t nb_rxq_setup = MAX_QUEUE_ID; /**< Number of RX
> queues
> > > per
> > > > +port start when dev_start. */ queueid_t nb_txq_setup =
> > > MAX_QUEUE_ID;
> > > > +/**< Number of TX queues per port start when dev_start  */
> > > >
> > > >  /*
> > > >   * Configurable number of RX/TX ring descriptors.
> > > > @@ -1594,7 +1598,7 @@ start_port(portid_t pid)
> > > >  			/* Apply Tx offloads configuration */
> > > >  			port->tx_conf.offloads = port->dev_conf.txmode.offloads;
> > > >  			/* setup tx queues */
> > > > -			for (qi = 0; qi < nb_txq; qi++) {
> > > > +			for (qi = 0; qi < nb_txq_setup; qi++) {
> > > >  				if ((numa_support) &&
> > > >  					(txring_numa[pi] != NUMA_NO_CONFIG))
> > > >  					diag = rte_eth_tx_queue_setup(pi, qi, @@
> -1622,7
> > > +1626,7 @@
> > > > start_port(portid_t pid)
> > > >  			/* Apply Rx offloads configuration */
> > > >  			port->rx_conf.offloads = port->dev_conf.rxmode.offloads;
> > > >  			/* setup rx queues */
> > > > -			for (qi = 0; qi < nb_rxq; qi++) {
> > > > +			for (qi = 0; qi < nb_rxq_setup; qi++) {
> > > >  				if ((numa_support) &&
> > > >  					(rxring_numa[pi] != NUMA_NO_CONFIG)) {
> > > >  					struct rte_mempool * mp =
> > > > diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index
> > > > 153abea05..1a423eb8c 100644
> > > > --- a/app/test-pmd/testpmd.h
> > > > +++ b/app/test-pmd/testpmd.h
> > > > @@ -373,6 +373,8 @@ extern uint64_t rss_hf;
> > > >
> > > >  extern queueid_t nb_rxq;
> > > >  extern queueid_t nb_txq;
> > > > +extern queueid_t nb_rxq_setup;
> > > > +extern queueid_t nb_txq_setup;
> > > >
> > > >  extern uint16_t nb_rxd;
> > > >  extern uint16_t nb_txd;
> > > > diff --git a/doc/guides/testpmd_app_ug/run_app.rst
> > > > b/doc/guides/testpmd_app_ug/run_app.rst
> > > > index 1fd53958a..63dbec407 100644
> > > > --- a/doc/guides/testpmd_app_ug/run_app.rst
> > > > +++ b/doc/guides/testpmd_app_ug/run_app.rst
> > > > @@ -354,6 +354,12 @@ The commandline options are:
> > > >      Set the number of RX queues per port to N, where 1 <= N <=
> 65535.
> > > >      The default value is 1.
> > > >
> > > > +*   ``--rxq-setup=N``
> > > > +
> > > > +    Set the number of RX queues will be setup before device started,
> > > > +    where 0 <= N <= 65535. The default value is rxq, if the number is
> > > > +    larger than rxq, it will be set to rxq automatically.
> > > > +
> > > >  *   ``--rxd=N``
> > > >
> > > >      Set the number of descriptors in the RX rings to N, where N > 0.
> > > > @@ -364,6 +370,12 @@ The commandline options are:
> > > >      Set the number of TX queues per port to N, where 1 <= N <=
> 65535.
> > > >      The default value is 1.
> > > >
> > > > +*   ``--txq-setup=N``
> > > > +
> > > > +    Set the number of TX queues will be setup before device started,
> > > > +    where 0 <= N <= 65535. The default value is rxq, if the number is
> > > > +    larger than txq, it will be set to txq automatically.
> > > > +
> > > >  *   ``--txd=N``
> > > >
> > > >      Set the number of descriptors in the TX rings to N, where N > 0.
> > > > --
> > > > 2.13.6



More information about the dev mailing list