[dpdk-dev] [PATCH v3 2/5] vhost: support selective datapath

Wang, Zhihong zhihong.wang at intel.com
Thu Mar 22 08:55:46 CET 2018



> -----Original Message-----
> From: Maxime Coquelin [mailto:maxime.coquelin at redhat.com]
> Sent: Thursday, March 22, 2018 5:06 AM
> To: Wang, Zhihong <zhihong.wang at intel.com>; dev at dpdk.org
> Cc: Tan, Jianfeng <jianfeng.tan at intel.com>; Bie, Tiwei
> <tiwei.bie at intel.com>; yliu at fridaylinux.org; Liang, Cunming
> <cunming.liang at intel.com>; Wang, Xiao W <xiao.w.wang at intel.com>; Daly,
> Dan <dan.daly at intel.com>
> Subject: Re: [PATCH v3 2/5] vhost: support selective datapath
> 
> 
> 
> On 02/27/2018 11:13 AM, Zhihong Wang wrote:
> > This patch introduces support for selective datapath in DPDK vhost-user lib
> > to enable various types of virtio-compatible devices to do data transfer
> > with virtio driver directly to enable acceleration. The default datapath is
> > the existing software implementation, more options will be available when
> > new engines are registered.
> >
> > An engine is a group of virtio-compatible devices under a single address.
> > The engine driver includes:
> >
> >   1. A set of engine ops is defined in rte_vdpa_eng_ops to perform engine
> >      init, uninit, and attributes reporting.
> >
> >   2. A set of device ops is defined in rte_vdpa_dev_ops for virtio devices
> >      in the engine to do device specific operations:
> >
> >       a. dev_conf: Called to configure the actual device when the virtio
> >          device becomes ready.
> >
> >       b. dev_close: Called to close the actual device when the virtio device
> >          is stopped.
> >
> >       c. vring_state_set: Called to change the state of the vring in the
> >          actual device when vring state changes.
> >
> >       d. feature_set: Called to set the negotiated features to device.
> >
> >       e. migration_done: Called to allow the device to response to RARP
> >          sending.
> >
> >       f. get_vfio_group_fd: Called to get the VFIO group fd of the device.
> >
> >       g. get_vfio_device_fd: Called to get the VFIO device fd of the device.
> >
> >       h. get_notify_area: Called to get the notify area info of the queue.
> >
> > Signed-off-by: Zhihong Wang <zhihong.wang at intel.com>
> > ---
> > Changes in v2:
> >
> >   1. Add VFIO related vDPA device ops.
> >
> >   lib/librte_vhost/Makefile              |   4 +-
> >   lib/librte_vhost/rte_vdpa.h            | 126
> +++++++++++++++++++++++++++++++++
> >   lib/librte_vhost/rte_vhost_version.map |   8 +++
> >   lib/librte_vhost/vdpa.c                | 124
> ++++++++++++++++++++++++++++++++
> >   4 files changed, 260 insertions(+), 2 deletions(-)
> >   create mode 100644 lib/librte_vhost/rte_vdpa.h
> >   create mode 100644 lib/librte_vhost/vdpa.c
> >
> > diff --git a/lib/librte_vhost/Makefile b/lib/librte_vhost/Makefile
> > index 5d6c6abae..37044ac03 100644
> > --- a/lib/librte_vhost/Makefile
> > +++ b/lib/librte_vhost/Makefile
> > @@ -22,9 +22,9 @@ LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -
> lrte_ethdev -lrte_net
> >
> >   # all source are stored in SRCS-y
> >   SRCS-$(CONFIG_RTE_LIBRTE_VHOST) := fd_man.c iotlb.c socket.c vhost.c
> \
> > -					vhost_user.c virtio_net.c
> > +					vhost_user.c virtio_net.c vdpa.c
> >
> >   # install includes
> > -SYMLINK-$(CONFIG_RTE_LIBRTE_VHOST)-include += rte_vhost.h
> > +SYMLINK-$(CONFIG_RTE_LIBRTE_VHOST)-include += rte_vhost.h
> rte_vdpa.h
> >
> >   include $(RTE_SDK)/mk/rte.lib.mk
> > diff --git a/lib/librte_vhost/rte_vdpa.h b/lib/librte_vhost/rte_vdpa.h
> > new file mode 100644
> > index 000000000..23fb471be
> > --- /dev/null
> > +++ b/lib/librte_vhost/rte_vdpa.h
> > @@ -0,0 +1,126 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2018 Intel Corporation
> > + */
> > +
> > +#ifndef _RTE_VDPA_H_
> > +#define _RTE_VDPA_H_
> > +
> > +/**
> > + * @file
> > + *
> > + * Device specific vhost lib
> > + */
> > +
> > +#include <rte_pci.h>
> > +#include "rte_vhost.h"
> > +
> > +#define MAX_VDPA_ENGINE_NUM 128
> > +#define MAX_VDPA_NAME_LEN 128
> > +
> > +struct rte_vdpa_eng_addr {
> > +	union {
> > +		uint8_t __dummy[64];
> > +		struct rte_pci_addr pci_addr;
> I think we should not only support PCI, but any type of buses.
> At least in the API.

Exactly, so we defined a 64 bytes union so any bus types can be added
without breaking the ABI.

But there is one place that may be impacted is the is_same_eng() function.
Maybe comparing all the bytes in __dummy[64] is a better way. What do you
think?


More information about the dev mailing list