[dpdk-dev] [PATCH v3 1/3] ether: support runtime queue setup
Ananyev, Konstantin
konstantin.ananyev at intel.com
Sun Mar 25 21:47:16 CEST 2018
> -----Original Message-----
> From: Zhang, Qi Z
> Sent: Wednesday, March 21, 2018 7:28 AM
> To: thomas at monjalon.net; Ananyev, Konstantin <konstantin.ananyev at intel.com>
> Cc: dev at dpdk.org; Xing, Beilei <beilei.xing at intel.com>; Wu, Jingjing <jingjing.wu at intel.com>; Lu, Wenzhuo <wenzhuo.lu at intel.com>;
> Zhang, Qi Z <qi.z.zhang at intel.com>
> Subject: [PATCH v3 1/3] ether: support runtime queue setup
>
> The patch let etherdev driver expose the capability flag through
> rte_eth_dev_info_get when it support runtime queue configuraiton,
> then base on the flag rte_eth_[rx|tx]_queue_setup could decide
> continue to setup the queue or just return fail when device already
> started.
>
> Signed-off-by: Qi Zhang <qi.z.zhang at intel.com>
> ---
> v3:
> - not overload deferred start
> - rename deferred setup to runtime setup
>
> v2:
> - enhance comment
>
> doc/guides/nics/features.rst | 8 ++++++++
> lib/librte_ether/rte_ethdev.c | 30 ++++++++++++++++++------------
> lib/librte_ether/rte_ethdev.h | 7 +++++++
> 3 files changed, 33 insertions(+), 12 deletions(-)
>
> diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
> index 1b4fb979f..6983faa4e 100644
> --- a/doc/guides/nics/features.rst
> +++ b/doc/guides/nics/features.rst
> @@ -892,7 +892,15 @@ Documentation describes performance values.
>
> See ``dpdk.org/doc/perf/*``.
>
> +.. _nic_features_queue_runtime_setup_capabilities:
>
> +Queue runtime setup capabilities
> +---------------------------------
> +
> +Supports queue setup / release after device started.
> +
> +* **[provides] rte_eth_dev_info**:
> ``runtime_queue_config_capa:DEV_RUNTIME_RX_QUEUE_SETUP,DEV_RUNTIME_TX_QUEUE_SETUP``.
> +* **[related] API**: ``rte_eth_dev_info_get()``.
>
> .. _nic_features_other:
>
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index 0590f0c10..343b1a6c0 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -1425,12 +1425,6 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
> return -EINVAL;
> }
>
> - if (dev->data->dev_started) {
> - RTE_PMD_DEBUG_TRACE(
> - "port %d must be stopped to allow configuration\n", port_id);
> - return -EBUSY;
> - }
> -
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_setup, -ENOTSUP);
>
> @@ -1474,6 +1468,15 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
> return -EINVAL;
> }
>
> + if (dev->data->dev_started &&
> + !(dev_info.runtime_queue_setup_capa &
> + DEV_RUNTIME_RX_QUEUE_SETUP))
> + return -EBUSY;
> +
> + if (dev->data->rx_queue_state[rx_queue_id] !=
> + RTE_ETH_QUEUE_STATE_STOPPED)
> + return -EBUSY;
> +
> rxq = dev->data->rx_queues;
> if (rxq[rx_queue_id]) {
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_release,
> @@ -1573,12 +1576,6 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
> return -EINVAL;
> }
>
> - if (dev->data->dev_started) {
> - RTE_PMD_DEBUG_TRACE(
> - "port %d must be stopped to allow configuration\n", port_id);
> - return -EBUSY;
> - }
> -
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_setup, -ENOTSUP);
>
> @@ -1596,6 +1593,15 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
> return -EINVAL;
> }
>
> + if (dev->data->dev_started &&
> + !(dev_info.runtime_queue_setup_capa &
> + DEV_RUNTIME_TX_QUEUE_SETUP))
> + return -EBUSY;
> +
> + if (dev->data->rx_queue_state[tx_queue_id] !=
> + RTE_ETH_QUEUE_STATE_STOPPED)
> + return -EBUSY;
> +
> txq = dev->data->tx_queues;
> if (txq[tx_queue_id]) {
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_release,
> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> index 036153306..4e2088458 100644
> --- a/lib/librte_ether/rte_ethdev.h
> +++ b/lib/librte_ether/rte_ethdev.h
> @@ -981,6 +981,11 @@ struct rte_eth_conf {
> */
> #define DEV_TX_OFFLOAD_SECURITY 0x00020000
>
> +#define DEV_RUNTIME_RX_QUEUE_SETUP 0x00000001
> +/**< Deferred setup rx queue */
> +#define DEV_RUNTIME_TX_QUEUE_SETUP 0x00000002
> +/**< Deferred setup tx queue */
> +
> /*
> * If new Tx offload capabilities are defined, they also must be
> * mentioned in rte_tx_offload_names in rte_ethdev.c file.
> @@ -1029,6 +1034,8 @@ struct rte_eth_dev_info {
> /** Configured number of rx/tx queues */
> uint16_t nb_rx_queues; /**< Number of RX queues. */
> uint16_t nb_tx_queues; /**< Number of TX queues. */
> + uint64_t runtime_queue_setup_capa;
> + /**< queues can be setup after dev_start (DEV_DEFERRED_). */
> };
>
> /**
> --
Acked-by: Konstantin Ananyev <konstantin.ananyev at intel.com>
> 2.13.6
More information about the dev
mailing list