[dpdk-dev] [PATCH v2] net/vhost: fix segfault when creating vdev dynamically

[Junjie Chen]

when creating vdev dynamically, vhost pmd driver start directly without
checking TX/RX queues ready or not, and thus cause segmentation fault when
vhost library accessing queues. This patch add flag to check whether queues
setup or not, and add driver start call into dev_start to allow user start
it after setting up queue.

Signed-off-by: Junjie Chen <junjie.j.chen at intel.com>
---
Changes in v2:
- check queue status in new_device, create queue in dev_start if not setup yet
 drivers/net/vhost/rte_eth_vhost.c | 73 ++++++++++++++++++++++++++++-----------
 1 file changed, 53 insertions(+), 20 deletions(-)

diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
index 3aae01c39..41410fa5a 100644
--- a/drivers/net/vhost/rte_eth_vhost.c
+++ b/drivers/net/vhost/rte_eth_vhost.c
@@ -117,7 +117,9 @@ struct pmd_internal {
 	char *dev_name;
 	char *iface_name;
 	uint16_t max_queues;
+	uint16_t vid;
 	rte_atomic32_t started;
+	rte_atomic32_t once;
 };
 
 struct internal_list {
@@ -580,21 +582,27 @@ new_device(int vid)
 		eth_dev->data->numa_node = newnode;
 #endif
 
-	for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
-		vq = eth_dev->data->rx_queues[i];
-		if (vq == NULL)
-			continue;
-		vq->vid = vid;
-		vq->internal = internal;
-		vq->port = eth_dev->data->port_id;
-	}
-	for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
-		vq = eth_dev->data->tx_queues[i];
-		if (vq == NULL)
-			continue;
-		vq->vid = vid;
-		vq->internal = internal;
-		vq->port = eth_dev->data->port_id;
+	if (eth_dev->data->rx_queues && eth_dev->data->tx_queues) {
+		for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
+			vq = eth_dev->data->rx_queues[i];
+			if (!vq)
+				continue;
+			vq->vid = vid;
+			vq->internal = internal;
+			vq->port = eth_dev->data->port_id;
+		}
+		for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
+			vq = eth_dev->data->tx_queues[i];
+			if (!vq)
+				continue;
+			vq->vid = vid;
+			vq->internal = internal;
+			vq->port = eth_dev->data->port_id;
+		}
+	} else {
+		RTE_LOG(INFO, PMD, "RX/TX queues have not setup yet\n");
+		internal->vid = vid;
+		rte_atomic32_set(&internal->once, 0);
 	}
 
 	for (i = 0; i < rte_vhost_get_vring_num(vid); i++)
@@ -605,7 +613,8 @@ new_device(int vid)
 	eth_dev->data->dev_link.link_status = ETH_LINK_UP;
 
 	rte_atomic32_set(&internal->dev_attached, 1);
-	update_queuing_status(eth_dev);
+	if (likely(rte_atomic32_read(&internal->once) == 1))
+		update_queuing_status(eth_dev);
 
 	RTE_LOG(INFO, PMD, "Vhost device %d created\n", vid);
 
@@ -770,12 +779,34 @@ rte_eth_vhost_get_vid_from_port_id(uint16_t port_id)
 }
 
 static int
-eth_dev_start(struct rte_eth_dev *dev)
+eth_dev_start(struct rte_eth_dev *eth_dev)
 {
-	struct pmd_internal *internal = dev->data->dev_private;
+	struct pmd_internal *internal = eth_dev->data->dev_private;
+	struct vhost_queue *vq;
+	int i;
+
+	if (unlikely(rte_atomic32_read(&internal->once) == 0)) {
+		for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
+			vq = eth_dev->data->rx_queues[i];
+			if (!vq)
+				continue;
+			vq->vid = internal->vid;
+			vq->internal = internal;
+			vq->port = eth_dev->data->port_id;
+		}
+		for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
+			vq = eth_dev->data->tx_queues[i];
+			if (!vq)
+				continue;
+			vq->vid = internal->vid;
+			vq->internal = internal;
+			vq->port = eth_dev->data->port_id;
+		}
+			rte_atomic32_set(&internal->once, 1);
+	}
 
 	rte_atomic32_set(&internal->started, 1);
-	update_queuing_status(dev);
+	update_queuing_status(eth_dev);
 
 	return 0;
 }
@@ -786,7 +817,9 @@ eth_dev_stop(struct rte_eth_dev *dev)
 	struct pmd_internal *internal = dev->data->dev_private;
 
 	rte_atomic32_set(&internal->started, 0);
-	update_queuing_status(dev);
+
+	if (likely(rte_atomic32_read(&internal->once) == 1))
+		update_queuing_status(dev);
 }
 
 static void
-- 
2.16.0