[dpdk-dev] [PATCH v2 2/2] doc/guides: updated testpmd app user guide for vxlan/nvgre encap/decap

Mohammad Abdul Awal mohammad.abdul.awal at intel.com
Mon May 14 17:42:45 CEST 2018



On 14/05/2018 11:35, Iremonger, Bernard wrote:
> Hi Awal,
>
>> -----Original Message-----
>> From: Awal, Mohammad Abdul
>> Sent: Friday, May 11, 2018 6:14 PM
>> To: dev at dpdk.org; Iremonger, Bernard <bernard.iremonger at intel.com>;
>> adrien.mazarguil at 6wind.com
>> Subject: [PATCH v2 2/2] doc/guides: updated testpmd app user guide for
>> vxlan/nvgre encap/decap
>>
>> Updated the testpmd user guide documentation with how to used new action
> Typo, "used" in line above should be "use".
Will fix.
>
>> types RTE_FLOW_ACTION_VXLAN_ENCAP, RTE_FLOW_ACTION_VXLAN_DECAP,
>> RTE_FLOW_ACTION_NVGRE_ENCAP, RTE_FLOW_ACTION_NVGRE_DECAP
>> capabilities.
>>
>> Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal at intel.com>
>> ---
>>   doc/guides/testpmd_app_ug/testpmd_funcs.rst | 50
>> +++++++++++++++++++++++++++++
>>   1 file changed, 50 insertions(+)
>>
>> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> index 542c217..6ee3ff3 100644
>> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> @@ -3559,6 +3559,56 @@ This section lists supported actions and their
>> attributes, if any.
>>
>>     - ``ethertype``: Ethertype.
>>
>> +- ``vxlan_encap``: encapsulate the inner flow with pattern of headers
>> +  according to RFC7348.
>> +
>> +  - ``eth_dst {MAC-48}``: outer ether destination.
>> +
>> +  - ``eth_src {MAC-48}``: outer ether source.
>> +
>> +  - ``eth_type {unsigned}``: outer ether type.
>> +
>> +  - ``vlan_tci {unsigned}``: outer vlan tci.
>> +
>> +  - ``ipv4_dst {ipv4 address}``: outer ipv4 destination.
>> +
>> +  - ``ipv4_src {ipv4 address}``: outer ipv4 source.
>> +
>> +  - ``ipv4_proto {unsigned}``: outer ipv4 proto.
>> +
>> +  - ``udp_dst {unsigned}``: outer udp destination.
>> +
>> +  - ``udp_src {unsigned}``: outer udp source.
>> +
>> +  - ``vxlan_vni {unsigned}``: outer vxlan vni.
>> +
>> +  - ``end``: outer vxlan header pattern end.
>> +
>> +- ``vxlan_decap``: decapsulate the vxlan tunnel flow according to RFC7348.
>> +
>> +- ``nvgre_encap``: encapsulate the inner flow with pattern of headers
>> +  according to RFC7637.
>> +
>> +  - ``eth_dst {MAC-48}``: outer ether destination.
>> +
>> +  - ``eth_src {MAC-48}``: outer ether source.
>> +
>> +  - ``eth_type {unsigned}``: outer ether type.
>> +
>> +  - ``vlan_tci {unsigned}``: outer vlan tci.
>> +
>> +  - ``ipv4_dst {ipv4 address}``: outer ipv4 destination.
>> +
>> +  - ``ipv4_src {ipv4 address}``: outer ipv4 source.
>> +
>> +  - ``ipv4_proto {unsigned}``: outer ipv4 proto.
>> +
>> +  - ``nvgre_vsni {unsigned}``: outer nvgre vsni.
>> +
>> +  - ``end``: outer nvgre header pattern end.
>> +
>> +- ``nvgre_decap``: decapsulate the nvgre tunnel flow according to RFC7637.
>> +
>>   Destroying flow rules
>>   ~~~~~~~~~~~~~~~~~~~~~
> I see that section 4.14.1 has been updated to document the syntax of the encap and decap actions, which look fine.
> However my comment on the v1 patch about adding some sample encap and decap rules has not been addressed.
> My understanding is, that it is a two stage process where the tunnel endpoint flow is created first and the encapsulated flow is then created, this is not obvious from the syntax description section.
> I think it would be useful to add some sample flows after section 4.12.8
The two stage process may be a PMD implementation specific. Since we do 
not have any underlying hw yet to exploit the tunnel API, adding a 
specific example will make user more confused. Using the above 
description will enable a user to create a flow to take into account 
nvgre/vxlan encap decap actions.

>> --
>> 2.7.4



More information about the dev mailing list