[dpdk-dev] [PATCH v2 1/2] net/mlx5: move device spawn configuration to probing
Shahaf Shuler
shahafs at mellanox.com
Thu Nov 1 09:03:36 CET 2018
Hi Koh,
Since I have comment on the other patch small nit.
Tuesday, October 30, 2018 9:49 AM, Yongseok Koh:
> Subject: [PATCH v2 1/2] net/mlx5: move device spawn configuration to
> probing
>
Probably you need to add log about the motivation for this change.
> Signed-off-by: Yongseok Koh <yskoh at mellanox.com>
> ---
> drivers/net/mlx5/mlx5.c | 54 ++++++++++++++++++++++++-------------------
> ------
> 1 file changed, 27 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> ec6a482a9a..6fa50ba1b1 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -704,8 +704,8 @@ mlx5_uar_init_secondary(struct rte_eth_dev *dev)
> * Backing DPDK device.
> * @param ibv_dev
> * Verbs device.
> - * @param vf
> - * If nonzero, enable VF-specific features.
> + * @param config
> + * Device configuration parameters
Missing period.
> * @param[in] switch_info
> * Switch properties of Ethernet device.
> *
> @@ -719,7 +719,7 @@ mlx5_uar_init_secondary(struct rte_eth_dev *dev)
> static struct rte_eth_dev * mlx5_dev_spawn(struct rte_device *dpdk_dev,
> struct ibv_device *ibv_dev,
> - int vf,
> + struct mlx5_dev_config config,
> const struct mlx5_switch_info *switch_info) {
> struct ibv_context *ctx;
> @@ -727,24 +727,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
> struct ibv_port_attr port_attr;
> struct ibv_pd *pd = NULL;
> struct mlx5dv_context dv_attr = { .comp_mask = 0 };
> - struct mlx5_dev_config config = {
> - .vf = !!vf,
> - .cqe_pad = 0,
> - .mps = MLX5_ARG_UNSET,
> - .tx_vec_en = 1,
> - .rx_vec_en = 1,
> - .mpw_hdr_dseg = 0,
> - .txq_inline = MLX5_ARG_UNSET,
> - .txqs_inline = MLX5_ARG_UNSET,
> - .inline_max_packet_sz = MLX5_ARG_UNSET,
> - .vf_nl_en = 1,
> - .mprq = {
> - .enabled = 0,
> - .stride_num_n = MLX5_MPRQ_STRIDE_NUM_N,
> - .max_memcpy_len =
> MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
> - .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
> - },
> - };
> struct rte_eth_dev *eth_dev = NULL;
> struct priv *priv = NULL;
> int err = 0;
> @@ -1176,7 +1158,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
> eth_dev->dev_ops = &mlx5_dev_ops;
> /* Register MAC address. */
> claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
> - if (vf && config.vf_nl_en)
> + if (config.vf && config.vf_nl_en)
> mlx5_nl_mac_addr_sync(eth_dev);
> priv->tcf_context = mlx5_flow_tcf_context_create();
> if (!priv->tcf_context) {
> @@ -1345,7 +1327,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv
> __rte_unused, {
> struct ibv_device **ibv_list;
> unsigned int n = 0;
> - int vf;
> + struct mlx5_dev_config dev_config;
> int ret;
>
> assert(pci_drv == &mlx5_driver);
> @@ -1443,21 +1425,39 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv
> __rte_unused,
> */
> if (n)
> qsort(list, n, sizeof(*list), mlx5_dev_spawn_data_cmp);
> + /* Default configuration. */
> + dev_config = (struct mlx5_dev_config){
> + .mps = MLX5_ARG_UNSET,
> + .tx_vec_en = 1,
> + .rx_vec_en = 1,
> + .txq_inline = MLX5_ARG_UNSET,
> + .txqs_inline = MLX5_ARG_UNSET,
> + .inline_max_packet_sz = MLX5_ARG_UNSET,
> + .vf_nl_en = 1,
> + .mprq = {
> + .enabled = 0, /* Disabled by default. */
> + .stride_num_n = MLX5_MPRQ_STRIDE_NUM_N,
> + .max_memcpy_len =
> MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
> + .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
> + },
> + };
> + /* Device speicific configuration. */
> switch (pci_dev->id.device_id) {
> case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
> case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
> case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
> case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
> - vf = 1;
> + dev_config.vf = 1;
> break;
> default:
> - vf = 0;
> + break;
> }
> for (i = 0; i != n; ++i) {
> uint32_t restore;
>
> - list[i].eth_dev = mlx5_dev_spawn
> - (&pci_dev->device, list[i].ibv_dev, vf, &list[i].info);
> + list[i].eth_dev = mlx5_dev_spawn(&pci_dev->device,
> + list[i].ibv_dev, dev_config,
> + &list[i].info);
> if (!list[i].eth_dev) {
> if (rte_errno != EBUSY && rte_errno != EEXIST)
> break;
> --
> 2.11.0
More information about the dev
mailing list