[dpdk-dev] [PATCH 1/3] net/mlx5: fix Verbs flow tunnel
Ori Kam
orika at mellanox.com
Sun Nov 4 09:17:30 CET 2018
> -----Original Message-----
> From: Yongseok Koh
> Sent: Friday, November 2, 2018 11:08 PM
> To: Shahaf Shuler <shahafs at mellanox.com>
> Cc: dev at dpdk.org; Yongseok Koh <yskoh at mellanox.com>; Ori Kam
> <orika at mellanox.com>
> Subject: [PATCH 1/3] net/mlx5: fix Verbs flow tunnel
>
> 1) Fix layer parsing
> In translation of tunneled flows, dev_flow->layers must not be used to
> check tunneled layer as it contains all the layers parsed from
> flow_drv_prepare(). Checking tunneled layer is needed to set
> IBV_FLOW_SPEC_INNER and it should be based on dynamic parsing. With
> dev_flow->layers on a tunneled flow, items will always be interpreted as
> inner as dev_flow->layer already has all the items.
>
> 2) Refactoring code
> It is partly because flow_verbs_translate_item_*() sets layer flag. Same
> code is repeating in multiple locations and that could be error-prone.
>
> - Introduce VERBS_SPEC_INNER() to unify setting IBV_FLOW_SPEC_INNER.
> - flow_verbs_translate_item_*() doesn't set parsing result -
> MLX5_FLOW_LAYER_*.
> - flow_verbs_translate_item_*() doesn't set priority or adjust hashfields
> but does only item translation. Both have to be done outside.
> - Make more consistent between Verbs and DV.
>
> 3) Remove flow_verbs_mark_update()
> This code can never be reached as validation prohibits specifying mark and
> flag actions together. No need to convert flag to mark.
>
> Fixes: 84c406e74524 ("net/mlx5: add flow translate function")
> Cc: orika at mellanox.com
>
> Signed-off-by: Yongseok Koh <yskoh at mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow_verbs.c | 568 +++++++++++++++++-------------------
> -
> 1 file changed, 258 insertions(+), 310 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_verbs.c
> b/drivers/net/mlx5/mlx5_flow_verbs.c
> index 2e506b91ad..ab58c04db5 100644
> --- a/drivers/net/mlx5/mlx5_flow_verbs.c
> +++ b/drivers/net/mlx5/mlx5_flow_verbs.c
> @@ -33,6 +33,9 @@
> #include "mlx5_glue.h"
> #include "mlx5_flow.h"
>
> +#define VERBS_SPEC_INNER(item_flags) \
> + (!!((item_flags) & MLX5_FLOW_LAYER_TUNNEL) ?
> IBV_FLOW_SPEC_INNER : 0)
> +
> /**
> * Create Verbs flow counter with Verbs library.
> *
> @@ -231,27 +234,26 @@ flow_verbs_counter_query(struct rte_eth_dev *dev
> __rte_unused,
> }
>
> /**
> - * Add a verbs item specification into @p flow.
> + * Add a verbs item specification into @p verbs.
> *
> - * @param[in, out] flow
> - * Pointer to flow structure.
> + * @param[out] verbs
> + * Pointer to verbs structure.
> * @param[in] src
> * Create specification.
> * @param[in] size
> * Size in bytes of the specification to copy.
> */
> static void
> -flow_verbs_spec_add(struct mlx5_flow *flow, void *src, unsigned int size)
> +flow_verbs_spec_add(struct mlx5_flow_verbs *verbs, void *src, unsigned int
> size)
> {
> - struct mlx5_flow_verbs *verbs = &flow->verbs;
> + void *dst;
>
> - if (verbs->specs) {
> - void *dst;
> -
> - dst = (void *)(verbs->specs + verbs->size);
> - memcpy(dst, src, size);
> - ++verbs->attr->num_of_specs;
> - }
> + if (!verbs)
> + return;
> + assert(verbs->specs);
> + dst = (void *)(verbs->specs + verbs->size);
> + memcpy(dst, src, size);
> + ++verbs->attr->num_of_specs;
> verbs->size += size;
> }
>
> @@ -260,24 +262,23 @@ flow_verbs_spec_add(struct mlx5_flow *flow, void
> *src, unsigned int size)
> * the input is valid and that there is space to insert the requested item
> * into the flow.
> *
> + * @param[in, out] dev_flow
> + * Pointer to dev_flow structure.
> * @param[in] item
> * Item specification.
> * @param[in] item_flags
> - * Bit field with all detected items.
> - * @param[in, out] dev_flow
> - * Pointer to dev_flow structure.
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_eth(const struct rte_flow_item *item,
> - uint64_t *item_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_item_eth(struct mlx5_flow *dev_flow,
> + const struct rte_flow_item *item,
> + uint64_t item_flags)
> {
> const struct rte_flow_item_eth *spec = item->spec;
> const struct rte_flow_item_eth *mask = item->mask;
> - const int tunnel = !!(*item_flags & MLX5_FLOW_LAYER_TUNNEL);
> const unsigned int size = sizeof(struct ibv_flow_spec_eth);
> struct ibv_flow_spec_eth eth = {
> - .type = IBV_FLOW_SPEC_ETH | (tunnel ?
> IBV_FLOW_SPEC_INNER : 0),
> + .type = IBV_FLOW_SPEC_ETH |
> VERBS_SPEC_INNER(item_flags),
> .size = size,
> };
>
> @@ -298,11 +299,8 @@ flow_verbs_translate_item_eth(const struct
> rte_flow_item *item,
> eth.val.src_mac[i] &= eth.mask.src_mac[i];
> }
> eth.val.ether_type &= eth.mask.ether_type;
> - dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
> }
> - flow_verbs_spec_add(dev_flow, ð, size);
> - *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
> - MLX5_FLOW_LAYER_OUTER_L2;
> + flow_verbs_spec_add(&dev_flow->verbs, ð, size);
> }
>
> /**
> @@ -344,24 +342,24 @@ flow_verbs_item_vlan_update(struct ibv_flow_attr
> *attr,
> * the input is valid and that there is space to insert the requested item
> * into the flow.
> *
> - * @param[in] item
> - * Item specification.
> - * @param[in, out] item_flags
> - * Bit mask that holds all detected items.
> * @param[in, out] dev_flow
> * Pointer to dev_flow structure.
> + * @param[in] item
> + * Item specification.
> + * @param[in] item_flags
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_vlan(const struct rte_flow_item *item,
> - uint64_t *item_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_item_vlan(struct mlx5_flow *dev_flow,
> + const struct rte_flow_item *item,
> + uint64_t item_flags)
> {
> const struct rte_flow_item_vlan *spec = item->spec;
> const struct rte_flow_item_vlan *mask = item->mask;
> unsigned int size = sizeof(struct ibv_flow_spec_eth);
> - const int tunnel = !!(*item_flags & MLX5_FLOW_LAYER_TUNNEL);
> + const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> struct ibv_flow_spec_eth eth = {
> - .type = IBV_FLOW_SPEC_ETH | (tunnel ?
> IBV_FLOW_SPEC_INNER : 0),
> + .type = IBV_FLOW_SPEC_ETH |
> VERBS_SPEC_INNER(item_flags),
> .size = size,
> };
> const uint32_t l2m = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
> @@ -377,16 +375,10 @@ flow_verbs_translate_item_vlan(const struct
> rte_flow_item *item,
> eth.mask.ether_type = mask->inner_type;
> eth.val.ether_type &= eth.mask.ether_type;
> }
> - if (!(*item_flags & l2m)) {
> - dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
> - flow_verbs_spec_add(dev_flow, ð, size);
> - } else {
> + if (!(item_flags & l2m))
> + flow_verbs_spec_add(&dev_flow->verbs, ð, size);
> + else
> flow_verbs_item_vlan_update(dev_flow->verbs.attr, ð);
> - size = 0; /* Only an update is done in eth specification. */
> - }
> - *item_flags |= tunnel ?
> - (MLX5_FLOW_LAYER_INNER_L2 |
> MLX5_FLOW_LAYER_INNER_VLAN) :
> - (MLX5_FLOW_LAYER_OUTER_L2 |
> MLX5_FLOW_LAYER_OUTER_VLAN);
> }
>
> /**
> @@ -394,32 +386,28 @@ flow_verbs_translate_item_vlan(const struct
> rte_flow_item *item,
> * the input is valid and that there is space to insert the requested item
> * into the flow.
> *
> + * @param[in, out] dev_flow
> + * Pointer to dev_flow structure.
> * @param[in] item
> * Item specification.
> - * @param[in, out] item_flags
> - * Bit mask that marks all detected items.
> - * @param[in, out] dev_flow
> - * Pointer to sepacific flow structure.
> + * @param[in] item_flags
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_ipv4(const struct rte_flow_item *item,
> - uint64_t *item_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_item_ipv4(struct mlx5_flow *dev_flow,
> + const struct rte_flow_item *item,
> + uint64_t item_flags)
> {
> const struct rte_flow_item_ipv4 *spec = item->spec;
> const struct rte_flow_item_ipv4 *mask = item->mask;
> - const int tunnel = !!(*item_flags & MLX5_FLOW_LAYER_TUNNEL);
> unsigned int size = sizeof(struct ibv_flow_spec_ipv4_ext);
> struct ibv_flow_spec_ipv4_ext ipv4 = {
> - .type = IBV_FLOW_SPEC_IPV4_EXT |
> - (tunnel ? IBV_FLOW_SPEC_INNER : 0),
> + .type = IBV_FLOW_SPEC_IPV4_EXT |
> VERBS_SPEC_INNER(item_flags),
> .size = size,
> };
>
> if (!mask)
> mask = &rte_flow_item_ipv4_mask;
> - *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
> - MLX5_FLOW_LAYER_OUTER_L3_IPV4;
> if (spec) {
> ipv4.val = (struct ibv_flow_ipv4_ext_filter){
> .src_ip = spec->hdr.src_addr,
> @@ -439,12 +427,7 @@ flow_verbs_translate_item_ipv4(const struct
> rte_flow_item *item,
> ipv4.val.proto &= ipv4.mask.proto;
> ipv4.val.tos &= ipv4.mask.tos;
> }
> - dev_flow->verbs.hash_fields |=
> - mlx5_flow_hashfields_adjust(dev_flow, tunnel,
> - MLX5_IPV4_LAYER_TYPES,
> - MLX5_IPV4_IBV_RX_HASH);
> - dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L3;
> - flow_verbs_spec_add(dev_flow, &ipv4, size);
> + flow_verbs_spec_add(&dev_flow->verbs, &ipv4, size);
> }
>
> /**
> @@ -452,31 +435,28 @@ flow_verbs_translate_item_ipv4(const struct
> rte_flow_item *item,
> * the input is valid and that there is space to insert the requested item
> * into the flow.
> *
> + * @param[in, out] dev_flow
> + * Pointer to dev_flow structure.
> * @param[in] item
> * Item specification.
> - * @param[in, out] item_flags
> - * Bit mask that marks all detected items.
> - * @param[in, out] dev_flow
> - * Pointer to sepacific flow structure.
> + * @param[in] item_flags
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_ipv6(const struct rte_flow_item *item,
> - uint64_t *item_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_item_ipv6(struct mlx5_flow *dev_flow,
> + const struct rte_flow_item *item,
> + uint64_t item_flags)
> {
> const struct rte_flow_item_ipv6 *spec = item->spec;
> const struct rte_flow_item_ipv6 *mask = item->mask;
> - const int tunnel = !!(dev_flow->layers & MLX5_FLOW_LAYER_TUNNEL);
> unsigned int size = sizeof(struct ibv_flow_spec_ipv6);
> struct ibv_flow_spec_ipv6 ipv6 = {
> - .type = IBV_FLOW_SPEC_IPV6 | (tunnel ?
> IBV_FLOW_SPEC_INNER : 0),
> + .type = IBV_FLOW_SPEC_IPV6 |
> VERBS_SPEC_INNER(item_flags),
> .size = size,
> };
>
> if (!mask)
> mask = &rte_flow_item_ipv6_mask;
> - *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
> - MLX5_FLOW_LAYER_OUTER_L3_IPV6;
> if (spec) {
> unsigned int i;
> uint32_t vtc_flow_val;
> @@ -516,12 +496,7 @@ flow_verbs_translate_item_ipv6(const struct
> rte_flow_item *item,
> ipv6.val.next_hdr &= ipv6.mask.next_hdr;
> ipv6.val.hop_limit &= ipv6.mask.hop_limit;
> }
> - dev_flow->verbs.hash_fields |=
> - mlx5_flow_hashfields_adjust(dev_flow, tunnel,
> - MLX5_IPV6_LAYER_TYPES,
> - MLX5_IPV6_IBV_RX_HASH);
> - dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L3;
> - flow_verbs_spec_add(dev_flow, &ipv6, size);
> + flow_verbs_spec_add(&dev_flow->verbs, &ipv6, size);
> }
>
> /**
> @@ -529,46 +504,38 @@ flow_verbs_translate_item_ipv6(const struct
> rte_flow_item *item,
> * the input is valid and that there is space to insert the requested item
> * into the flow.
> *
> + * @param[in, out] dev_flow
> + * Pointer to dev_flow structure.
> * @param[in] item
> * Item specification.
> - * @param[in, out] item_flags
> - * Bit mask that marks all detected items.
> - * @param[in, out] dev_flow
> - * Pointer to sepacific flow structure.
> + * @param[in] item_flags
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_udp(const struct rte_flow_item *item,
> - uint64_t *item_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_item_tcp(struct mlx5_flow *dev_flow,
> + const struct rte_flow_item *item,
> + uint64_t item_flags __rte_unused)
> {
> - const struct rte_flow_item_udp *spec = item->spec;
> - const struct rte_flow_item_udp *mask = item->mask;
> - const int tunnel = !!(*item_flags & MLX5_FLOW_LAYER_TUNNEL);
> + const struct rte_flow_item_tcp *spec = item->spec;
> + const struct rte_flow_item_tcp *mask = item->mask;
> unsigned int size = sizeof(struct ibv_flow_spec_tcp_udp);
> - struct ibv_flow_spec_tcp_udp udp = {
> - .type = IBV_FLOW_SPEC_UDP | (tunnel ?
> IBV_FLOW_SPEC_INNER : 0),
> + struct ibv_flow_spec_tcp_udp tcp = {
> + .type = IBV_FLOW_SPEC_TCP |
> VERBS_SPEC_INNER(item_flags),
> .size = size,
> };
>
> if (!mask)
> - mask = &rte_flow_item_udp_mask;
> - *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
> - MLX5_FLOW_LAYER_OUTER_L4_UDP;
> + mask = &rte_flow_item_tcp_mask;
> if (spec) {
> - udp.val.dst_port = spec->hdr.dst_port;
> - udp.val.src_port = spec->hdr.src_port;
> - udp.mask.dst_port = mask->hdr.dst_port;
> - udp.mask.src_port = mask->hdr.src_port;
> + tcp.val.dst_port = spec->hdr.dst_port;
> + tcp.val.src_port = spec->hdr.src_port;
> + tcp.mask.dst_port = mask->hdr.dst_port;
> + tcp.mask.src_port = mask->hdr.src_port;
> /* Remove unwanted bits from values. */
> - udp.val.src_port &= udp.mask.src_port;
> - udp.val.dst_port &= udp.mask.dst_port;
> + tcp.val.src_port &= tcp.mask.src_port;
> + tcp.val.dst_port &= tcp.mask.dst_port;
> }
> - dev_flow->verbs.hash_fields |=
> - mlx5_flow_hashfields_adjust(dev_flow, tunnel, ETH_RSS_UDP,
> - (IBV_RX_HASH_SRC_PORT_UDP |
> - IBV_RX_HASH_DST_PORT_UDP));
> - dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L4;
> - flow_verbs_spec_add(dev_flow, &udp, size);
> + flow_verbs_spec_add(&dev_flow->verbs, &tcp, size);
> }
>
> /**
> @@ -576,46 +543,38 @@ flow_verbs_translate_item_udp(const struct
> rte_flow_item *item,
> * the input is valid and that there is space to insert the requested item
> * into the flow.
> *
> + * @param[in, out] dev_flow
> + * Pointer to dev_flow structure.
> * @param[in] item
> * Item specification.
> - * @param[in, out] item_flags
> - * Bit mask that marks all detected items.
> - * @param[in, out] dev_flow
> - * Pointer to sepacific flow structure.
> + * @param[in] item_flags
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_tcp(const struct rte_flow_item *item,
> - uint64_t *item_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_item_udp(struct mlx5_flow *dev_flow,
> + const struct rte_flow_item *item,
> + uint64_t item_flags __rte_unused)
> {
> - const struct rte_flow_item_tcp *spec = item->spec;
> - const struct rte_flow_item_tcp *mask = item->mask;
> - const int tunnel = !!(dev_flow->layers & MLX5_FLOW_LAYER_TUNNEL);
> + const struct rte_flow_item_udp *spec = item->spec;
> + const struct rte_flow_item_udp *mask = item->mask;
> unsigned int size = sizeof(struct ibv_flow_spec_tcp_udp);
> - struct ibv_flow_spec_tcp_udp tcp = {
> - .type = IBV_FLOW_SPEC_TCP | (tunnel ?
> IBV_FLOW_SPEC_INNER : 0),
> + struct ibv_flow_spec_tcp_udp udp = {
> + .type = IBV_FLOW_SPEC_UDP |
> VERBS_SPEC_INNER(item_flags),
> .size = size,
> };
>
> if (!mask)
> - mask = &rte_flow_item_tcp_mask;
> - *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
> - MLX5_FLOW_LAYER_OUTER_L4_TCP;
> + mask = &rte_flow_item_udp_mask;
> if (spec) {
> - tcp.val.dst_port = spec->hdr.dst_port;
> - tcp.val.src_port = spec->hdr.src_port;
> - tcp.mask.dst_port = mask->hdr.dst_port;
> - tcp.mask.src_port = mask->hdr.src_port;
> + udp.val.dst_port = spec->hdr.dst_port;
> + udp.val.src_port = spec->hdr.src_port;
> + udp.mask.dst_port = mask->hdr.dst_port;
> + udp.mask.src_port = mask->hdr.src_port;
> /* Remove unwanted bits from values. */
> - tcp.val.src_port &= tcp.mask.src_port;
> - tcp.val.dst_port &= tcp.mask.dst_port;
> + udp.val.src_port &= udp.mask.src_port;
> + udp.val.dst_port &= udp.mask.dst_port;
> }
> - dev_flow->verbs.hash_fields |=
> - mlx5_flow_hashfields_adjust(dev_flow, tunnel, ETH_RSS_TCP,
> - (IBV_RX_HASH_SRC_PORT_TCP |
> - IBV_RX_HASH_DST_PORT_TCP));
> - dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L4;
> - flow_verbs_spec_add(dev_flow, &tcp, size);
> + flow_verbs_spec_add(&dev_flow->verbs, &udp, size);
> }
>
> /**
> @@ -623,17 +582,17 @@ flow_verbs_translate_item_tcp(const struct
> rte_flow_item *item,
> * the input is valid and that there is space to insert the requested item
> * into the flow.
> *
> + * @param[in, out] dev_flow
> + * Pointer to dev_flow structure.
> * @param[in] item
> * Item specification.
> - * @param[in, out] item_flags
> - * Bit mask that marks all detected items.
> - * @param[in, out] dev_flow
> - * Pointer to sepacific flow structure.
> + * @param[in] item_flags
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_vxlan(const struct rte_flow_item *item,
> - uint64_t *item_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_item_vxlan(struct mlx5_flow *dev_flow,
> + const struct rte_flow_item *item,
> + uint64_t item_flags __rte_unused)
> {
> const struct rte_flow_item_vxlan *spec = item->spec;
> const struct rte_flow_item_vxlan *mask = item->mask;
> @@ -657,9 +616,7 @@ flow_verbs_translate_item_vxlan(const struct
> rte_flow_item *item,
> /* Remove unwanted bits from values. */
> vxlan.val.tunnel_id &= vxlan.mask.tunnel_id;
> }
> - flow_verbs_spec_add(dev_flow, &vxlan, size);
> - dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
> - *item_flags |= MLX5_FLOW_LAYER_VXLAN;
> + flow_verbs_spec_add(&dev_flow->verbs, &vxlan, size);
> }
>
> /**
> @@ -667,17 +624,17 @@ flow_verbs_translate_item_vxlan(const struct
> rte_flow_item *item,
> * the input is valid and that there is space to insert the requested item
> * into the flow.
> *
> + * @param[in, out] dev_flow
> + * Pointer to dev_flow structure.
> * @param[in] item
> * Item specification.
> - * @param[in, out] item_flags
> - * Bit mask that marks all detected items.
> - * @param[in, out] dev_flow
> - * Pointer to sepacific flow structure.
> + * @param[in] item_flags
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_vxlan_gpe(const struct rte_flow_item *item,
> - uint64_t *item_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_item_vxlan_gpe(struct mlx5_flow *dev_flow,
> + const struct rte_flow_item *item,
> + uint64_t item_flags __rte_unused)
> {
> const struct rte_flow_item_vxlan_gpe *spec = item->spec;
> const struct rte_flow_item_vxlan_gpe *mask = item->mask;
> @@ -701,9 +658,7 @@ flow_verbs_translate_item_vxlan_gpe(const struct
> rte_flow_item *item,
> /* Remove unwanted bits from values. */
> vxlan_gpe.val.tunnel_id &= vxlan_gpe.mask.tunnel_id;
> }
> - flow_verbs_spec_add(dev_flow, &vxlan_gpe, size);
> - dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
> - *item_flags |= MLX5_FLOW_LAYER_VXLAN_GPE;
> + flow_verbs_spec_add(&dev_flow->verbs, &vxlan_gpe, size);
> }
>
> /**
> @@ -763,17 +718,17 @@ flow_verbs_item_gre_ip_protocol_update(struct
> ibv_flow_attr *attr,
> * the input is valid and that there is space to insert the requested item
> * into the flow.
> *
> + * @param[in, out] dev_flow
> + * Pointer to dev_flow structure.
> * @param[in] item
> * Item specification.
> - * @param[in, out] item_flags
> - * Bit mask that marks all detected items.
> - * @param[in, out] dev_flow
> - * Pointer to sepacific flow structure.
> + * @param[in] item_flags
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_gre(const struct rte_flow_item *item
> __rte_unused,
> - uint64_t *item_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_item_gre(struct mlx5_flow *dev_flow,
> + const struct rte_flow_item *item __rte_unused,
> + uint64_t item_flags)
> {
> struct mlx5_flow_verbs *verbs = &dev_flow->verbs;
> #ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
> @@ -804,7 +759,7 @@ flow_verbs_translate_item_gre(const struct
> rte_flow_item *item __rte_unused,
> tunnel.val.key &= tunnel.mask.key;
> }
> #endif
> - if (*item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4)
> + if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4)
> flow_verbs_item_gre_ip_protocol_update(verbs->attr,
>
> IBV_FLOW_SPEC_IPV4_EXT,
> IPPROTO_GRE);
> @@ -812,9 +767,7 @@ flow_verbs_translate_item_gre(const struct
> rte_flow_item *item __rte_unused,
> flow_verbs_item_gre_ip_protocol_update(verbs->attr,
> IBV_FLOW_SPEC_IPV6,
> IPPROTO_GRE);
> - flow_verbs_spec_add(dev_flow, &tunnel, size);
> - verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
> - *item_flags |= MLX5_FLOW_LAYER_GRE;
> + flow_verbs_spec_add(verbs, &tunnel, size);
> }
>
> /**
> @@ -822,17 +775,17 @@ flow_verbs_translate_item_gre(const struct
> rte_flow_item *item __rte_unused,
> * the input is valid and that there is space to insert the requested action
> * into the flow. This function also return the action that was added.
> *
> + * @param[in, out] dev_flow
> + * Pointer to dev_flow structure.
> * @param[in] item
> * Item specification.
> - * @param[in, out] item_flags
> - * Bit mask that marks all detected items.
> - * @param[in, out] dev_flow
> - * Pointer to sepacific flow structure.
> + * @param[in] item_flags
> + * Parsed item flags.
> */
> static void
> -flow_verbs_translate_item_mpls(const struct rte_flow_item *item
> __rte_unused,
> - uint64_t *action_flags __rte_unused,
> - struct mlx5_flow *dev_flow __rte_unused)
> +flow_verbs_translate_item_mpls(struct mlx5_flow *dev_flow __rte_unused,
> + const struct rte_flow_item *item __rte_unused,
> + uint64_t item_flags __rte_unused)
> {
> #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
> const struct rte_flow_item_mpls *spec = item->spec;
> @@ -851,25 +804,24 @@ flow_verbs_translate_item_mpls(const struct
> rte_flow_item *item __rte_unused,
> /* Remove unwanted bits from values. */
> mpls.val.label &= mpls.mask.label;
> }
> - flow_verbs_spec_add(dev_flow, &mpls, size);
> - dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
> - *action_flags |= MLX5_FLOW_LAYER_MPLS;
> + flow_verbs_spec_add(&dev_flow->verbs, &mpls, size);
> #endif
> }
>
> /**
> * Convert the @p action into a Verbs specification. This function assumes that
> * the input is valid and that there is space to insert the requested action
> - * into the flow. This function also return the action that was added.
> + * into the flow.
> *
> - * @param[in, out] action_flags
> - * Pointer to the detected actions.
> * @param[in] dev_flow
> * Pointer to mlx5_flow.
> + * @param[in] action
> + * Action configuration.
> */
> static void
> -flow_verbs_translate_action_drop(uint64_t *action_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_action_drop
> + (struct mlx5_flow *dev_flow,
> + const struct rte_flow_action *action __rte_unused)
> {
> unsigned int size = sizeof(struct ibv_flow_spec_action_drop);
> struct ibv_flow_spec_action_drop drop = {
> @@ -877,26 +829,22 @@ flow_verbs_translate_action_drop(uint64_t
> *action_flags,
> .size = size,
> };
>
> - flow_verbs_spec_add(dev_flow, &drop, size);
> - *action_flags |= MLX5_FLOW_ACTION_DROP;
> + flow_verbs_spec_add(&dev_flow->verbs, &drop, size);
> }
>
> /**
> * Convert the @p action into a Verbs specification. This function assumes that
> * the input is valid and that there is space to insert the requested action
> - * into the flow. This function also return the action that was added.
> + * into the flow.
> *
> - * @param[in] action
> - * Action configuration.
> - * @param[in, out] action_flags
> - * Pointer to the detected actions.
> * @param[in] dev_flow
> * Pointer to mlx5_flow.
> + * @param[in] action
> + * Action configuration.
> */
> static void
> -flow_verbs_translate_action_queue(const struct rte_flow_action *action,
> - uint64_t *action_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_action_queue(struct mlx5_flow *dev_flow,
> + const struct rte_flow_action *action)
> {
> const struct rte_flow_action_queue *queue = action->conf;
> struct rte_flow *flow = dev_flow->flow;
> @@ -904,13 +852,12 @@ flow_verbs_translate_action_queue(const struct
> rte_flow_action *action,
> if (flow->queue)
> (*flow->queue)[0] = queue->index;
> flow->rss.queue_num = 1;
> - *action_flags |= MLX5_FLOW_ACTION_QUEUE;
> }
>
> /**
> * Convert the @p action into a Verbs specification. This function assumes that
> * the input is valid and that there is space to insert the requested action
> - * into the flow. This function also return the action that was added.
> + * into the flow.
> *
> * @param[in] action
> * Action configuration.
> @@ -920,9 +867,8 @@ flow_verbs_translate_action_queue(const struct
> rte_flow_action *action,
> * Pointer to mlx5_flow.
> */
> static void
> -flow_verbs_translate_action_rss(const struct rte_flow_action *action,
> - uint64_t *action_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_action_rss(struct mlx5_flow *dev_flow,
> + const struct rte_flow_action *action)
> {
> const struct rte_flow_action_rss *rss = action->conf;
> struct rte_flow *flow = dev_flow->flow;
> @@ -934,26 +880,22 @@ flow_verbs_translate_action_rss(const struct
> rte_flow_action *action,
> memcpy(flow->key, rss->key, MLX5_RSS_HASH_KEY_LEN);
> flow->rss.types = rss->types;
> flow->rss.level = rss->level;
> - *action_flags |= MLX5_FLOW_ACTION_RSS;
> }
>
> /**
> * Convert the @p action into a Verbs specification. This function assumes that
> * the input is valid and that there is space to insert the requested action
> - * into the flow. This function also return the action that was added.
> + * into the flow.
> *
> - * @param[in] action
> - * Action configuration.
> - * @param[in, out] action_flags
> - * Pointer to the detected actions.
> * @param[in] dev_flow
> * Pointer to mlx5_flow.
> + * @param[in] action
> + * Action configuration.
> */
> static void
> flow_verbs_translate_action_flag
> - (const struct rte_flow_action *action __rte_unused,
> - uint64_t *action_flags,
> - struct mlx5_flow *dev_flow)
> + (struct mlx5_flow *dev_flow,
> + const struct rte_flow_action *action __rte_unused)
> {
> unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
> struct ibv_flow_spec_action_tag tag = {
> @@ -961,87 +903,44 @@ flow_verbs_translate_action_flag
> .size = size,
> .tag_id = mlx5_flow_mark_set(MLX5_FLOW_MARK_DEFAULT),
> };
> - *action_flags |= MLX5_FLOW_ACTION_MARK;
> - flow_verbs_spec_add(dev_flow, &tag, size);
> -}
>
> -/**
> - * Update verbs specification to modify the flag to mark.
> - *
> - * @param[in, out] verbs
> - * Pointer to the mlx5_flow_verbs structure.
> - * @param[in] mark_id
> - * Mark identifier to replace the flag.
> - */
> -static void
> -flow_verbs_mark_update(struct mlx5_flow_verbs *verbs, uint32_t mark_id)
> -{
> - struct ibv_spec_header *hdr;
> - int i;
> -
> - if (!verbs)
> - return;
> - /* Update Verbs specification. */
> - hdr = (struct ibv_spec_header *)verbs->specs;
> - if (!hdr)
> - return;
> - for (i = 0; i != verbs->attr->num_of_specs; ++i) {
> - if (hdr->type == IBV_FLOW_SPEC_ACTION_TAG) {
> - struct ibv_flow_spec_action_tag *t =
> - (struct ibv_flow_spec_action_tag *)hdr;
> -
> - t->tag_id = mlx5_flow_mark_set(mark_id);
> - }
> - hdr = (struct ibv_spec_header *)((uintptr_t)hdr + hdr->size);
> - }
> + flow_verbs_spec_add(&dev_flow->verbs, &tag, size);
> }
>
> /**
> * Convert the @p action into a Verbs specification. This function assumes that
> * the input is valid and that there is space to insert the requested action
> - * into the flow. This function also return the action that was added.
> + * into the flow.
> *
> - * @param[in] action
> - * Action configuration.
> - * @param[in, out] action_flags
> - * Pointer to the detected actions.
> * @param[in] dev_flow
> * Pointer to mlx5_flow.
> + * @param[in] action
> + * Action configuration.
> */
> static void
> -flow_verbs_translate_action_mark(const struct rte_flow_action *action,
> - uint64_t *action_flags,
> - struct mlx5_flow *dev_flow)
> +flow_verbs_translate_action_mark(struct mlx5_flow *dev_flow,
> + const struct rte_flow_action *action)
> {
> const struct rte_flow_action_mark *mark = action->conf;
> unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
> struct ibv_flow_spec_action_tag tag = {
> .type = IBV_FLOW_SPEC_ACTION_TAG,
> .size = size,
> + .tag_id = mlx5_flow_mark_set(mark->id),
> };
> - struct mlx5_flow_verbs *verbs = &dev_flow->verbs;
>
> - if (*action_flags & MLX5_FLOW_ACTION_FLAG) {
> - flow_verbs_mark_update(verbs, mark->id);
> - size = 0;
> - } else {
> - tag.tag_id = mlx5_flow_mark_set(mark->id);
> - flow_verbs_spec_add(dev_flow, &tag, size);
> - }
> - *action_flags |= MLX5_FLOW_ACTION_MARK;
> + flow_verbs_spec_add(&dev_flow->verbs, &tag, size);
> }
>
> /**
> * Convert the @p action into a Verbs specification. This function assumes that
> * the input is valid and that there is space to insert the requested action
> - * into the flow. This function also return the action that was added.
> + * into the flow.
> *
> * @param[in] dev
> * Pointer to the Ethernet device structure.
> * @param[in] action
> * Action configuration.
> - * @param[in, out] action_flags
> - * Pointer to the detected actions.
> * @param[in] dev_flow
> * Pointer to mlx5_flow.
> * @param[out] error
> @@ -1051,10 +950,9 @@ flow_verbs_translate_action_mark(const struct
> rte_flow_action *action,
> * 0 On success else a negative errno value is returned and rte_errno is set.
> */
> static int
> -flow_verbs_translate_action_count(struct rte_eth_dev *dev,
> +flow_verbs_translate_action_count(struct mlx5_flow *dev_flow,
> const struct rte_flow_action *action,
> - uint64_t *action_flags,
> - struct mlx5_flow *dev_flow,
> + struct rte_eth_dev *dev,
> struct rte_flow_error *error)
> {
> const struct rte_flow_action_count *count = action->conf;
> @@ -1078,13 +976,12 @@ flow_verbs_translate_action_count(struct
> rte_eth_dev *dev,
> "cannot get counter"
> " context.");
> }
> - *action_flags |= MLX5_FLOW_ACTION_COUNT;
> #if defined(HAVE_IBV_DEVICE_COUNTERS_SET_V42)
> counter.counter_set_handle = flow->counter->cs->handle;
> - flow_verbs_spec_add(dev_flow, &counter, size);
> + flow_verbs_spec_add(&dev_flow->verbs, &counter, size);
> #elif defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
> counter.counters = flow->counter->cs;
> - flow_verbs_spec_add(dev_flow, &counter, size);
> + flow_verbs_spec_add(&dev_flow->verbs, &counter, size);
> #endif
> return 0;
> }
> @@ -1116,7 +1013,6 @@ flow_verbs_validate(struct rte_eth_dev *dev,
> int ret;
> uint64_t action_flags = 0;
> uint64_t item_flags = 0;
> - int tunnel = 0;
> uint8_t next_protocol = 0xff;
>
> if (items == NULL)
> @@ -1125,9 +1021,9 @@ flow_verbs_validate(struct rte_eth_dev *dev,
> if (ret < 0)
> return ret;
> for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
> + int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> int ret = 0;
>
> - tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> switch (items->type) {
> case RTE_FLOW_ITEM_TYPE_VOID:
> break;
> @@ -1144,8 +1040,10 @@ flow_verbs_validate(struct rte_eth_dev *dev,
> error);
> if (ret < 0)
> return ret;
> - item_flags |= tunnel ?
> MLX5_FLOW_LAYER_INNER_VLAN :
> -
> MLX5_FLOW_LAYER_OUTER_VLAN;
> + item_flags |= tunnel ? (MLX5_FLOW_LAYER_INNER_L2
> |
> +
> MLX5_FLOW_LAYER_INNER_VLAN) :
> + (MLX5_FLOW_LAYER_OUTER_L2 |
> +
> MLX5_FLOW_LAYER_OUTER_VLAN);
> break;
> case RTE_FLOW_ITEM_TYPE_IPV4:
> ret = mlx5_flow_validate_item_ipv4(items, item_flags,
> @@ -1395,8 +1293,11 @@ flow_verbs_get_items_and_size(const struct
> rte_flow_item items[],
> break;
> case RTE_FLOW_ITEM_TYPE_VLAN:
> size += sizeof(struct ibv_flow_spec_eth);
> - detected_items |= tunnel ?
> MLX5_FLOW_LAYER_INNER_VLAN :
> -
> MLX5_FLOW_LAYER_OUTER_VLAN;
> + detected_items |=
> + tunnel ? (MLX5_FLOW_LAYER_INNER_L2 |
> + MLX5_FLOW_LAYER_INNER_VLAN) :
> + (MLX5_FLOW_LAYER_OUTER_L2 |
> + MLX5_FLOW_LAYER_OUTER_VLAN);
> break;
> case RTE_FLOW_ITEM_TYPE_IPV4:
> size += sizeof(struct ibv_flow_spec_ipv4_ext);
> @@ -1528,50 +1429,48 @@ flow_verbs_translate(struct rte_eth_dev *dev,
> const struct rte_flow_action actions[],
> struct rte_flow_error *error)
> {
> - uint64_t action_flags = 0;
> + struct rte_flow *flow = dev_flow->flow;
> uint64_t item_flags = 0;
> + uint64_t action_flags = 0;
> uint64_t priority = attr->priority;
> + uint32_t subpriority = 0;
> struct priv *priv = dev->data->dev_private;
>
> if (priority == MLX5_FLOW_PRIO_RSVD)
> priority = priv->config.flow_prio - 1;
> for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
> int ret;
> +
> switch (actions->type) {
> case RTE_FLOW_ACTION_TYPE_VOID:
> break;
> case RTE_FLOW_ACTION_TYPE_FLAG:
> - flow_verbs_translate_action_flag(actions,
> - &action_flags,
> - dev_flow);
> + flow_verbs_translate_action_flag(dev_flow, actions);
> + action_flags |= MLX5_FLOW_ACTION_FLAG;
> break;
> case RTE_FLOW_ACTION_TYPE_MARK:
> - flow_verbs_translate_action_mark(actions,
> - &action_flags,
> - dev_flow);
> + flow_verbs_translate_action_mark(dev_flow, actions);
> + action_flags |= MLX5_FLOW_ACTION_MARK;
> break;
> case RTE_FLOW_ACTION_TYPE_DROP:
> - flow_verbs_translate_action_drop(&action_flags,
> - dev_flow);
> + flow_verbs_translate_action_drop(dev_flow, actions);
> + action_flags |= MLX5_FLOW_ACTION_DROP;
> break;
> case RTE_FLOW_ACTION_TYPE_QUEUE:
> - flow_verbs_translate_action_queue(actions,
> - &action_flags,
> - dev_flow);
> + flow_verbs_translate_action_queue(dev_flow, actions);
> + action_flags |= MLX5_FLOW_ACTION_QUEUE;
> break;
> case RTE_FLOW_ACTION_TYPE_RSS:
> - flow_verbs_translate_action_rss(actions,
> - &action_flags,
> - dev_flow);
> + flow_verbs_translate_action_rss(dev_flow, actions);
> + action_flags |= MLX5_FLOW_ACTION_RSS;
> break;
> case RTE_FLOW_ACTION_TYPE_COUNT:
> - ret = flow_verbs_translate_action_count(dev,
> + ret = flow_verbs_translate_action_count(dev_flow,
> actions,
> - &action_flags,
> - dev_flow,
> - error);
> + dev, error);
> if (ret < 0)
> return ret;
> + action_flags |= MLX5_FLOW_ACTION_COUNT;
> break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
> @@ -1580,51 +1479,100 @@ flow_verbs_translate(struct rte_eth_dev *dev,
> "action not supported");
> }
> }
> - /* Device flow should have action flags by flow_drv_prepare(). */
> - assert(dev_flow->flow->actions == action_flags);
> + flow->actions = action_flags;
> for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
> + int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> +
> switch (items->type) {
> case RTE_FLOW_ITEM_TYPE_VOID:
> break;
> case RTE_FLOW_ITEM_TYPE_ETH:
> - flow_verbs_translate_item_eth(items, &item_flags,
> - dev_flow);
> + flow_verbs_translate_item_eth(dev_flow, items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L2;
> + item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L2
> :
> + MLX5_FLOW_LAYER_OUTER_L2;
> break;
> case RTE_FLOW_ITEM_TYPE_VLAN:
> - flow_verbs_translate_item_vlan(items, &item_flags,
> - dev_flow);
> + flow_verbs_translate_item_vlan(dev_flow, items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L2;
> + item_flags |= tunnel ? (MLX5_FLOW_LAYER_INNER_L2
> |
> +
> MLX5_FLOW_LAYER_INNER_VLAN) :
> + (MLX5_FLOW_LAYER_OUTER_L2 |
> +
> MLX5_FLOW_LAYER_OUTER_VLAN);
> break;
> case RTE_FLOW_ITEM_TYPE_IPV4:
> - flow_verbs_translate_item_ipv4(items, &item_flags,
> - dev_flow);
> + flow_verbs_translate_item_ipv4(dev_flow, items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L3;
> + dev_flow->verbs.hash_fields |=
> + mlx5_flow_hashfields_adjust
> + (dev_flow, tunnel,
> + MLX5_IPV4_LAYER_TYPES,
> + MLX5_IPV4_IBV_RX_HASH);
> + item_flags |= tunnel ?
> MLX5_FLOW_LAYER_INNER_L3_IPV4 :
> +
> MLX5_FLOW_LAYER_OUTER_L3_IPV4;
> break;
> case RTE_FLOW_ITEM_TYPE_IPV6:
> - flow_verbs_translate_item_ipv6(items, &item_flags,
> - dev_flow);
> - break;
> - case RTE_FLOW_ITEM_TYPE_UDP:
> - flow_verbs_translate_item_udp(items, &item_flags,
> - dev_flow);
> + flow_verbs_translate_item_ipv6(dev_flow, items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L3;
> + dev_flow->verbs.hash_fields |=
> + mlx5_flow_hashfields_adjust
> + (dev_flow, tunnel,
> + MLX5_IPV6_LAYER_TYPES,
> + MLX5_IPV6_IBV_RX_HASH);
> + item_flags |= tunnel ?
> MLX5_FLOW_LAYER_INNER_L3_IPV6 :
> +
> MLX5_FLOW_LAYER_OUTER_L3_IPV6;
> break;
> case RTE_FLOW_ITEM_TYPE_TCP:
> - flow_verbs_translate_item_tcp(items, &item_flags,
> - dev_flow);
> + flow_verbs_translate_item_tcp(dev_flow, items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L4;
> + dev_flow->verbs.hash_fields |=
> + mlx5_flow_hashfields_adjust
> + (dev_flow, tunnel, ETH_RSS_TCP,
> + (IBV_RX_HASH_SRC_PORT_TCP |
> + IBV_RX_HASH_DST_PORT_TCP));
> + item_flags |= tunnel ?
> MLX5_FLOW_LAYER_INNER_L4_TCP :
> +
> MLX5_FLOW_LAYER_OUTER_L4_TCP;
> + break;
> + case RTE_FLOW_ITEM_TYPE_UDP:
> + flow_verbs_translate_item_udp(dev_flow, items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L4;
> + dev_flow->verbs.hash_fields |=
> + mlx5_flow_hashfields_adjust
> + (dev_flow, tunnel, ETH_RSS_UDP,
> + (IBV_RX_HASH_SRC_PORT_UDP |
> + IBV_RX_HASH_DST_PORT_UDP));
> + item_flags |= tunnel ?
> MLX5_FLOW_LAYER_INNER_L4_UDP :
> +
> MLX5_FLOW_LAYER_OUTER_L4_UDP;
> break;
> case RTE_FLOW_ITEM_TYPE_VXLAN:
> - flow_verbs_translate_item_vxlan(items, &item_flags,
> - dev_flow);
> + flow_verbs_translate_item_vxlan(dev_flow, items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L2;
> + item_flags |= MLX5_FLOW_LAYER_VXLAN;
> break;
> case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
> - flow_verbs_translate_item_vxlan_gpe(items,
> &item_flags,
> - dev_flow);
> + flow_verbs_translate_item_vxlan_gpe(dev_flow,
> items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L2;
> + item_flags |= MLX5_FLOW_LAYER_VXLAN_GPE;
> break;
> case RTE_FLOW_ITEM_TYPE_GRE:
> - flow_verbs_translate_item_gre(items, &item_flags,
> - dev_flow);
> + flow_verbs_translate_item_gre(dev_flow, items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L2;
> + item_flags |= MLX5_FLOW_LAYER_GRE;
> break;
> case RTE_FLOW_ITEM_TYPE_MPLS:
> - flow_verbs_translate_item_mpls(items, &item_flags,
> - dev_flow);
> + flow_verbs_translate_item_mpls(dev_flow, items,
> + item_flags);
> + subpriority = MLX5_PRIORITY_MAP_L2;
> + item_flags |= MLX5_FLOW_LAYER_MPLS;
> break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
> @@ -1633,9 +1581,9 @@ flow_verbs_translate(struct rte_eth_dev *dev,
> "item not supported");
> }
> }
> + dev_flow->layers = item_flags;
> dev_flow->verbs.attr->priority =
> - mlx5_flow_adjust_priority(dev, priority,
> - dev_flow->verbs.attr->priority);
> + mlx5_flow_adjust_priority(dev, priority, subpriority);
> return 0;
> }
>
> --
> 2.11.0
Thanks,
Acked-by: Ori Kam <orika at mellanox.com>
More information about the dev
mailing list