[dpdk-dev] [PATCH v3 1/2] net/ixgbe: fix x550 code to handle unidentified PHY

[Zhang, Qi Z]

> -----Original Message-----
> From: Luca Boccassi [mailto:bluca at debian.org]
> Sent: Friday, November 2, 2018 8:19 AM
> To: dev at dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu at intel.com>; Ananyev, Konstantin
> <konstantin.ananyev at intel.com>; Zhang, Qi Z <qi.z.zhang at intel.com>;
> 3chas3 at gmail.com; Luca Boccassi <bluca at debian.org>; stable at dpdk.org
> Subject: [PATCH v3 1/2] net/ixgbe: fix x550 code to handle unidentified PHY
> 
> ixgbe_identify_sfp_module_X550em() was missing the code to handle
> unidentified PHY that has been there in 82599 so it was not able to complete
> initialization of ixgbe sequence if no sfp plugged in.
> Port it over to return an appropriate type and complete init sequence
> properly.
> 
> Fixes: d2e72774e58c ("ixgbe/base: support X550")
> Cc: stable at dpdk.org
> 
> Signed-off-by: Luca Boccassi <bluca at debian.org>
> ---
> v2: refresh to remove merge conflict with master
> v3: coalesce fix into ixgbe_identify_sfp_module_X550em to avoid
>     code duplication, improve comment
> 
>  drivers/net/ixgbe/base/ixgbe_x550.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c
> b/drivers/net/ixgbe/base/ixgbe_x550.c
> index f7b98af52..a88d5c86a 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x550.c
> +++ b/drivers/net/ixgbe/base/ixgbe_x550.c
> @@ -1561,6 +1561,12 @@ s32 ixgbe_identify_sfp_module_X550em(struct
> ixgbe_hw *hw)
> 
>  	status = ixgbe_identify_module_generic(hw);
> 
> +	/* Set PHY type none if no PHY detected to allow init without SFP */
> +	if (hw->phy.type == ixgbe_phy_unknown) {
> +		hw->phy.type = ixgbe_phy_none;

Set PHY type to none for a device that does have PHY looks weird.  
does ixgeb_phy_generic works here?

Where is failure you met with ixgbe_phy_unknown?

> +		return IXGBE_SUCCESS;
> +	}
> +
>  	if (status != IXGBE_SUCCESS)
>  		return status;
> 
> --
> 2.19.1