[dpdk-dev] [PATCH] dev: fix attach rollback of a device that was already attached

Zhang, Qi Z qi.z.zhang at intel.com
Fri Nov 23 20:10:45 CET 2018



> -----Original Message-----
> From: Stojaczyk, Dariusz
> Sent: Friday, November 23, 2018 6:45 AM
> To: dev at dpdk.org
> Cc: thomas at monjalon.net; Stojaczyk, Dariusz <dariusz.stojaczyk at intel.com>;
> Zhang, Qi Z <qi.z.zhang at intel.com>
> Subject: [PATCH] dev: fix attach rollback of a device that was already attached
> 
> When primary process receives an IPC attach request of a device that's already
> locally-attached, it doesn't setup its variables properly and is prone to segfaulting
> on a subsequent rollback.
> 
> `ret = local_dev_probe(req->devargs, &dev)`
> 
> The above function will set `dev` pointer to the proper device *unless* it returns
> with error. One of those errors is -EEXIST, which the hotplug function explicitly
> ignores. For -EEXIST, it proceeds with attaching the device and expects the dev
> pointer to be valid.

Good capture.
> 
> Despite this patch being a fix, it also introduces a design decision - when any
> secondary process fails to attach a device, the primary process that already had
> the device attached won't attempt to detach that device locally as a part of the
> rollback routine.
> Primary process would have already printed a message "Failed to [...] on
> secondary" and now it will also print a warning "Devices may not be in sync [...]".

A little bit concern for this.
we may try to avoid the abnormal situation that device is not synced.
The scenario you describe actually is start from an abnormal situation due to some previous error.
so is it better to always take chance to end up with a normal situation.

It looks better for me if we can fixed it in local_dev_probe to return a valid device with -EEXIST.

> 
> Fixes: ac9e4a17370f ("eal: support attach/detach shared device from
> secondary")
> Cc: qi.z.zhang at intel.com
> 
> Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk at intel.com>
> ---
>  lib/librte_eal/common/hotplug_mp.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/lib/librte_eal/common/hotplug_mp.c
> b/lib/librte_eal/common/hotplug_mp.c
> index 7c9fcc46c..7ee074a31 100644
> --- a/lib/librte_eal/common/hotplug_mp.c
> +++ b/lib/librte_eal/common/hotplug_mp.c
> @@ -88,7 +88,7 @@ __handle_secondary_request(void *param)
>  		(const struct eal_dev_mp_req *)msg->param;
>  	struct eal_dev_mp_req tmp_req;
>  	struct rte_devargs *da;
> -	struct rte_device *dev;
> +	struct rte_device *dev = NULL;
>  	struct rte_bus *bus;
>  	int ret = 0;
> 
> @@ -168,7 +168,15 @@ __handle_secondary_request(void *param)
>  	if (req->t == EAL_DEV_REQ_TYPE_ATTACH) {
>  		tmp_req.t = EAL_DEV_REQ_TYPE_ATTACH_ROLLBACK;
>  		eal_dev_hotplug_request_to_secondary(&tmp_req);
> -		local_dev_remove(dev);
> +		if (dev == NULL) {
> +			/* device was already attached at the time we got the
> +			 * request, don't detach it now.
> +			 */
> +			RTE_LOG(WARNING, EAL,
> +				"Devices in secondary may not sync with primary\n");
> +		} else {
> +			local_dev_remove(dev);
> +		}
>  	} else {
>  		tmp_req.t = EAL_DEV_REQ_TYPE_DETACH_ROLLBACK;
>  		eal_dev_hotplug_request_to_secondary(&tmp_req);
> --
> 2.17.1



More information about the dev mailing list