[dpdk-dev] [PATCH 2/3] app/compress-perf: add performance measurement

Tomasz Jozwiak tomaszx.jozwiak at intel.com
Mon Oct 1 15:27:06 CEST 2018


Added performance measurement part into compression perf. test.

Signed-off-by: De Lara Guarch, Pablo <pablo.de.lara.guarch at intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak at intel.com>
---
 app/test-compress-perf/main.c | 844 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 844 insertions(+)

diff --git a/app/test-compress-perf/main.c b/app/test-compress-perf/main.c
index f52b98d..093dfaf 100644
--- a/app/test-compress-perf/main.c
+++ b/app/test-compress-perf/main.c
@@ -5,13 +5,721 @@
 #include <rte_malloc.h>
 #include <rte_eal.h>
 #include <rte_log.h>
+#include <rte_cycles.h>
 #include <rte_compressdev.h>
 
 #include "comp_perf_options.h"
 
+#define NUM_MAX_XFORMS 16
+#define NUM_MAX_INFLIGHT_OPS 512
+#define EXPANSE_RATIO 1.05
+#define MIN_ISAL_SIZE 8
+
+#define DIV_CEIL(a, b)  ((a) / (b) + ((a) % (b) != 0))
+
+static int
+param_range_check(uint16_t size, const struct rte_param_log2_range *range)
+{
+	unsigned int next_size;
+
+	/* Check lower/upper bounds */
+	if (size < range->min)
+		return -1;
+
+	if (size > range->max)
+		return -1;
+
+	/* If range is actually only one value, size is correct */
+	if (range->increment == 0)
+		return 0;
+
+	/* Check if value is one of the supported sizes */
+	for (next_size = range->min; next_size <= range->max;
+			next_size += range->increment)
+		if (size == next_size)
+			return 0;
+
+	return -1;
+}
+
+static int
+comp_perf_check_capabilities(struct comp_test_data *test_data)
+{
+	const struct rte_compressdev_capabilities *cap;
+
+	cap = rte_compressdev_capability_get(test_data->cdev_id,
+					     RTE_COMP_ALGO_DEFLATE);
+
+	if (cap == NULL) {
+		RTE_LOG(ERR, USER1,
+			"Compress device does not support DEFLATE\n");
+		return -1;
+	}
+
+	uint64_t comp_flags = cap->comp_feature_flags;
+
+	/* Huffman enconding */
+	if (test_data->huffman_enc == RTE_COMP_HUFFMAN_FIXED &&
+			(comp_flags & RTE_COMP_FF_HUFFMAN_FIXED) == 0) {
+		RTE_LOG(ERR, USER1,
+			"Compress device does not supported Fixed Huffman\n");
+		return -1;
+	}
+
+	if (test_data->huffman_enc == RTE_COMP_HUFFMAN_DYNAMIC &&
+			(comp_flags & RTE_COMP_FF_HUFFMAN_DYNAMIC) == 0) {
+		RTE_LOG(ERR, USER1,
+			"Compress device does not supported Dynamic Huffman\n");
+		return -1;
+	}
+
+	/* Window size */
+	if (test_data->window_sz != -1) {
+		if (param_range_check(test_data->window_sz, &cap->window_size)
+				< 0) {
+			RTE_LOG(ERR, USER1,
+				"Compress device does not support "
+				"this window size\n");
+			return -1;
+		}
+	} else
+		/* Set window size to PMD maximum if none was specified */
+		test_data->window_sz = cap->window_size.max;
+
+	/* Check if chained mbufs is supported */
+	if (test_data->max_sgl_segs > 1  &&
+			(comp_flags & RTE_COMP_FF_OOP_SGL_IN_SGL_OUT) == 0) {
+		RTE_LOG(INFO, USER1, "Compress device does not support "
+				"chained mbufs. Max SGL segments set to 1\n");
+		test_data->max_sgl_segs = 1;
+	}
+
+	/* Level 0 support */
+	if (test_data->level.min == 0 &&
+			(comp_flags & RTE_COMP_FF_NONCOMPRESSED_BLOCKS) == 0) {
+		RTE_LOG(ERR, USER1, "Compress device does not support "
+				"level 0 (no compression)\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int
+comp_perf_allocate_memory(struct comp_test_data *test_data)
+{
+	/* Number of segments for input and output
+	 * (compression and decompression)
+	 */
+	uint32_t total_segs = DIV_CEIL(test_data->input_data_sz,
+			test_data->seg_sz);
+	test_data->comp_buf_pool = rte_pktmbuf_pool_create("comp_buf_pool",
+				total_segs,
+				0, 0, test_data->seg_sz + RTE_PKTMBUF_HEADROOM,
+				rte_socket_id());
+	if (test_data->comp_buf_pool == NULL) {
+		RTE_LOG(ERR, USER1, "Mbuf mempool could not be created\n");
+		return -1;
+	}
+
+	test_data->decomp_buf_pool = rte_pktmbuf_pool_create("decomp_buf_pool",
+				total_segs,
+				0, 0, test_data->seg_sz + RTE_PKTMBUF_HEADROOM,
+				rte_socket_id());
+	if (test_data->decomp_buf_pool == NULL) {
+		RTE_LOG(ERR, USER1, "Mbuf mempool could not be created\n");
+		return -1;
+	}
+
+	test_data->total_bufs = DIV_CEIL(total_segs, test_data->max_sgl_segs);
+
+	test_data->op_pool = rte_comp_op_pool_create("op_pool",
+				  test_data->total_bufs,
+				  0, 0, rte_socket_id());
+	if (test_data->op_pool == NULL) {
+		RTE_LOG(ERR, USER1, "Comp op mempool could not be created\n");
+		return -1;
+	}
+
+	/*
+	 * Compressed data might be a bit larger than input data,
+	 * if data cannot be compressed
+	 */
+	test_data->compressed_data = rte_zmalloc_socket(NULL,
+				test_data->input_data_sz * EXPANSE_RATIO
+							+ MIN_ISAL_SIZE, 0,
+				rte_socket_id());
+	if (test_data->compressed_data == NULL) {
+		RTE_LOG(ERR, USER1, "Memory to hold the data from the input "
+				"file could not be allocated\n");
+		return -1;
+	}
+
+	test_data->decompressed_data = rte_zmalloc_socket(NULL,
+				test_data->input_data_sz, 0,
+				rte_socket_id());
+	if (test_data->decompressed_data == NULL) {
+		RTE_LOG(ERR, USER1, "Memory to hold the data from the input "
+				"file could not be allocated\n");
+		return -1;
+	}
+
+	test_data->comp_bufs = rte_zmalloc_socket(NULL,
+			test_data->total_bufs * sizeof(struct rte_mbuf *),
+			0, rte_socket_id());
+	if (test_data->comp_bufs == NULL) {
+		RTE_LOG(ERR, USER1, "Memory to hold the compression mbufs"
+				" could not be allocated\n");
+		return -1;
+	}
+
+	test_data->decomp_bufs = rte_zmalloc_socket(NULL,
+			test_data->total_bufs * sizeof(struct rte_mbuf *),
+			0, rte_socket_id());
+	if (test_data->decomp_bufs == NULL) {
+		RTE_LOG(ERR, USER1, "Memory to hold the decompression mbufs"
+				" could not be allocated\n");
+		return -1;
+	}
+	return 0;
+}
+
+static int
+comp_perf_dump_input_data(struct comp_test_data *test_data)
+{
+	FILE *f = fopen(test_data->input_file, "r");
+
+	if (f == NULL) {
+		RTE_LOG(ERR, USER1, "Input file could not be opened\n");
+		return -1;
+	}
+
+	if (fseek(f, 0, SEEK_END) != 0) {
+		RTE_LOG(ERR, USER1, "Size of input could not be calculated\n");
+		goto err;
+	}
+	size_t actual_file_sz = ftell(f);
+	/* If extended input data size has not been set,
+	 * input data size = file size
+	 */
+
+	if (test_data->input_data_sz == 0)
+		test_data->input_data_sz = actual_file_sz;
+
+	if (fseek(f, 0, SEEK_SET) != 0) {
+		RTE_LOG(ERR, USER1, "Size of input could not be calculated\n");
+		goto err;
+	}
+
+	test_data->input_data = rte_zmalloc_socket(NULL,
+				test_data->input_data_sz, 0, rte_socket_id());
+
+	if (test_data->input_data == NULL) {
+		RTE_LOG(ERR, USER1, "Memory to hold the data from the input "
+				"file could not be allocated\n");
+		goto err;
+	}
+
+	size_t remaining_data = test_data->input_data_sz;
+	uint8_t *data = test_data->input_data;
+
+	while (remaining_data > 0) {
+		size_t data_to_read = RTE_MIN(remaining_data, actual_file_sz);
+
+		if (fread(data, data_to_read, 1, f) != 1) {
+			RTE_LOG(ERR, USER1, "Input file could not be read\n");
+			goto err;
+		}
+		if (fseek(f, 0, SEEK_SET) != 0) {
+			RTE_LOG(ERR, USER1,
+				"Size of input could not be calculated\n");
+			goto err;
+		}
+		remaining_data -= data_to_read;
+		data += data_to_read;
+	}
+
+	if (test_data->input_data_sz > actual_file_sz)
+		RTE_LOG(INFO, USER1,
+		  "%zu bytes read from file %s, extending the file %.2f times\n",
+			test_data->input_data_sz, test_data->input_file,
+			(double)test_data->input_data_sz/actual_file_sz);
+	else
+		RTE_LOG(INFO, USER1,
+			"%zu bytes read from file %s\n",
+			test_data->input_data_sz, test_data->input_file);
+
+	fclose(f);
+
+	return 0;
+
+err:
+	fclose(f);
+	rte_free(test_data->input_data);
+	test_data->input_data = NULL;
+
+	return -1;
+}
+
+static int
+comp_perf_initialize_compressdev(struct comp_test_data *test_data)
+{
+	uint8_t enabled_cdev_count;
+	uint8_t enabled_cdevs[RTE_COMPRESS_MAX_DEVS];
+
+	enabled_cdev_count = rte_compressdev_devices_get(test_data->driver_name,
+			enabled_cdevs, RTE_COMPRESS_MAX_DEVS);
+	if (enabled_cdev_count == 0) {
+		RTE_LOG(ERR, USER1, "No compress devices type %s available\n",
+				test_data->driver_name);
+		return -EINVAL;
+	}
+
+	if (enabled_cdev_count > 1)
+		RTE_LOG(INFO, USER1,
+			"Only the first compress device will be used\n");
+
+	test_data->cdev_id = enabled_cdevs[0];
+
+	if (comp_perf_check_capabilities(test_data) < 0)
+		return -1;
+
+	/* Configure compressdev (one device, one queue pair) */
+	struct rte_compressdev_config config = {
+		.socket_id = rte_socket_id(),
+		.nb_queue_pairs = 1,
+		.max_nb_priv_xforms = NUM_MAX_XFORMS,
+		.max_nb_streams = 0
+	};
+
+	if (rte_compressdev_configure(test_data->cdev_id, &config) < 0) {
+		RTE_LOG(ERR, USER1, "Device configuration failed\n");
+		return -1;
+	}
+
+	if (rte_compressdev_queue_pair_setup(test_data->cdev_id, 0,
+			NUM_MAX_INFLIGHT_OPS, rte_socket_id()) < 0) {
+		RTE_LOG(ERR, USER1, "Queue pair setup failed\n");
+		return -1;
+	}
+
+	if (rte_compressdev_start(test_data->cdev_id) < 0) {
+		RTE_LOG(ERR, USER1, "Device could not be started\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int
+prepare_bufs(struct comp_test_data *test_data)
+{
+	uint32_t remaining_data = test_data->input_data_sz;
+	uint8_t *input_data_ptr = test_data->input_data;
+	size_t data_sz;
+	uint8_t *data_addr;
+	uint32_t i, j;
+
+	for (i = 0; i < test_data->total_bufs; i++) {
+		/* Allocate data in input mbuf and copy data from input file */
+		test_data->decomp_bufs[i] =
+			rte_pktmbuf_alloc(test_data->decomp_buf_pool);
+		if (test_data->decomp_bufs[i] == NULL) {
+			RTE_LOG(ERR, USER1, "Could not allocate mbuf\n");
+			return -1;
+		}
+
+		data_sz = RTE_MIN(remaining_data, test_data->seg_sz);
+		data_addr = (uint8_t *) rte_pktmbuf_append(
+					test_data->decomp_bufs[i], data_sz);
+		if (data_addr == NULL) {
+			RTE_LOG(ERR, USER1, "Could not append data\n");
+			return -1;
+		}
+		rte_memcpy(data_addr, input_data_ptr, data_sz);
+
+		input_data_ptr += data_sz;
+		remaining_data -= data_sz;
+
+		/* Already one segment in the mbuf */
+		uint16_t segs_per_mbuf = 1;
+
+		/* Chain mbufs if needed for input mbufs */
+		while (segs_per_mbuf < test_data->max_sgl_segs
+				&& remaining_data > 0) {
+			struct rte_mbuf *next_seg =
+				rte_pktmbuf_alloc(test_data->decomp_buf_pool);
+
+			if (next_seg == NULL) {
+				RTE_LOG(ERR, USER1,
+					"Could not allocate mbuf\n");
+				return -1;
+			}
+
+			data_sz = RTE_MIN(remaining_data, test_data->seg_sz);
+			data_addr = (uint8_t *)rte_pktmbuf_append(next_seg,
+				data_sz);
+
+			if (data_addr == NULL) {
+				RTE_LOG(ERR, USER1, "Could not append data\n");
+				return -1;
+			}
+
+			rte_memcpy(data_addr, input_data_ptr, data_sz);
+			input_data_ptr += data_sz;
+			remaining_data -= data_sz;
+
+			if (rte_pktmbuf_chain(test_data->decomp_bufs[i],
+					next_seg) < 0) {
+				RTE_LOG(ERR, USER1, "Could not chain mbufs\n");
+				return -1;
+			}
+			segs_per_mbuf++;
+		}
+
+		/* Allocate data in output mbuf */
+		test_data->comp_bufs[i] =
+			rte_pktmbuf_alloc(test_data->comp_buf_pool);
+		if (test_data->comp_bufs[i] == NULL) {
+			RTE_LOG(ERR, USER1, "Could not allocate mbuf\n");
+			return -1;
+		}
+		data_addr = (uint8_t *) rte_pktmbuf_append(
+					test_data->comp_bufs[i],
+					test_data->seg_sz);
+		if (data_addr == NULL) {
+			RTE_LOG(ERR, USER1, "Could not append data\n");
+			return -1;
+		}
+
+		/* Chain mbufs if needed for output mbufs */
+		for (j = 1; j < segs_per_mbuf; j++) {
+			struct rte_mbuf *next_seg =
+				rte_pktmbuf_alloc(test_data->comp_buf_pool);
+
+			if (next_seg == NULL) {
+				RTE_LOG(ERR, USER1,
+					"Could not allocate mbuf\n");
+				return -1;
+			}
+
+			data_addr = (uint8_t *)rte_pktmbuf_append(next_seg,
+				test_data->seg_sz);
+
+			if (data_addr == NULL) {
+				RTE_LOG(ERR, USER1, "Could not append data\n");
+				return -1;
+			}
+
+			if (rte_pktmbuf_chain(test_data->comp_bufs[i],
+					next_seg) < 0) {
+				RTE_LOG(ERR, USER1, "Could not chain mbufs\n");
+				return -1;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void
+free_bufs(struct comp_test_data *test_data)
+{
+	uint32_t i;
+
+	for (i = 0; i < test_data->total_bufs; i++) {
+		rte_pktmbuf_free(test_data->comp_bufs[i]);
+		rte_pktmbuf_free(test_data->decomp_bufs[i]);
+	}
+	rte_free(test_data->comp_bufs);
+	rte_free(test_data->decomp_bufs);
+}
+
+static int
+main_loop(struct comp_test_data *test_data, uint8_t level,
+			enum rte_comp_xform_type type,
+			uint8_t *output_data_ptr,
+			size_t *output_data_sz,
+			unsigned int benchmarking)
+{
+	uint8_t dev_id = test_data->cdev_id;
+	uint32_t i, iter, num_iter;
+	struct rte_comp_op **ops, **deq_ops;
+	void *priv_xform = NULL;
+	struct rte_comp_xform xform;
+	size_t output_size = 0;
+	struct rte_mbuf **input_bufs, **output_bufs;
+	int res = 0;
+	int allocated = 0;
+
+	if (test_data == NULL || !test_data->burst_sz) {
+		RTE_LOG(ERR, USER1,
+			"Unknow burst size\n");
+		return -1;
+	}
+
+	ops = rte_zmalloc_socket(NULL,
+		2 * test_data->total_bufs * sizeof(struct rte_comp_op *),
+		0, rte_socket_id());
+
+	if (ops == NULL) {
+		RTE_LOG(ERR, USER1,
+			"Can't allocate memory for ops strucures\n");
+		return -1;
+	}
+
+	deq_ops = &ops[test_data->total_bufs];
+
+	if (type == RTE_COMP_COMPRESS) {
+		xform = (struct rte_comp_xform) {
+			.type = RTE_COMP_COMPRESS,
+			.compress = {
+				.algo = RTE_COMP_ALGO_DEFLATE,
+				.deflate.huffman = test_data->huffman_enc,
+				.level = level,
+				.window_size = test_data->window_sz,
+				.chksum = RTE_COMP_CHECKSUM_NONE,
+				.hash_algo = RTE_COMP_HASH_ALGO_NONE
+			}
+		};
+		input_bufs = test_data->decomp_bufs;
+		output_bufs = test_data->comp_bufs;
+	} else {
+		xform = (struct rte_comp_xform) {
+			.type = RTE_COMP_DECOMPRESS,
+			.decompress = {
+				.algo = RTE_COMP_ALGO_DEFLATE,
+				.chksum = RTE_COMP_CHECKSUM_NONE,
+				.window_size = test_data->window_sz,
+				.hash_algo = RTE_COMP_HASH_ALGO_NONE
+			}
+		};
+		input_bufs = test_data->comp_bufs;
+		output_bufs = test_data->decomp_bufs;
+	}
+
+	/* Create private xform */
+	if (rte_compressdev_private_xform_create(dev_id, &xform,
+			&priv_xform) < 0) {
+		RTE_LOG(ERR, USER1, "Private xform could not be created\n");
+		res = -1;
+		goto end;
+	}
+
+	uint64_t tsc_start, tsc_end, tsc_duration;
+
+	tsc_start = tsc_end = tsc_duration = 0;
+	if (benchmarking) {
+		tsc_start = rte_rdtsc();
+		num_iter = test_data->num_iter;
+	} else
+		num_iter = 1;
+
+	for (iter = 0; iter < num_iter; iter++) {
+		uint32_t total_ops = test_data->total_bufs;
+		uint32_t remaining_ops = test_data->total_bufs;
+		uint32_t total_deq_ops = 0;
+		uint32_t total_enq_ops = 0;
+		uint16_t ops_unused = 0;
+		uint16_t num_enq = 0;
+		uint16_t num_deq = 0;
+
+		output_size = 0;
+
+		while (remaining_ops > 0) {
+			uint16_t num_ops = RTE_MIN(remaining_ops,
+						   test_data->burst_sz);
+			uint16_t ops_needed = num_ops - ops_unused;
+
+			/*
+			 * Move the unused operations from the previous
+			 * enqueue_burst call to the front, to maintain order
+			 */
+			if ((ops_unused > 0) && (num_enq > 0)) {
+				size_t nb_b_to_mov =
+				      ops_unused * sizeof(struct rte_comp_op *);
+
+				memmove(ops, &ops[num_enq], nb_b_to_mov);
+			}
+
+			/* Allocate compression operations */
+			if (ops_needed && !rte_comp_op_bulk_alloc(
+						test_data->op_pool,
+						&ops[ops_unused],
+						ops_needed)) {
+				RTE_LOG(ERR, USER1,
+				      "Could not allocate enough operations\n");
+				res = -1;
+				goto end;
+			}
+			allocated += ops_needed;
+
+			for (i = 0; i < ops_needed; i++) {
+				/*
+				 * Calculate next buffer to attach to operation
+				 */
+				uint32_t buf_id = total_enq_ops + i +
+						ops_unused;
+				uint16_t op_id = ops_unused + i;
+				/* Reset all data in output buffers */
+				struct rte_mbuf *m = output_bufs[buf_id];
+
+				m->pkt_len = test_data->seg_sz * m->nb_segs;
+				while (m) {
+					m->data_len = m->buf_len - m->data_off;
+					m = m->next;
+				}
+				ops[op_id]->m_src = input_bufs[buf_id];
+				ops[op_id]->m_dst = output_bufs[buf_id];
+				ops[op_id]->src.offset = 0;
+				ops[op_id]->src.length =
+					rte_pktmbuf_pkt_len(input_bufs[buf_id]);
+				ops[op_id]->dst.offset = 0;
+				ops[op_id]->flush_flag = RTE_COMP_FLUSH_FINAL;
+				ops[op_id]->input_chksum = buf_id;
+				ops[op_id]->private_xform = priv_xform;
+			}
+
+			num_enq = rte_compressdev_enqueue_burst(dev_id, 0, ops,
+								num_ops);
+			ops_unused = num_ops - num_enq;
+			remaining_ops -= num_enq;
+			total_enq_ops += num_enq;
+
+			num_deq = rte_compressdev_dequeue_burst(dev_id, 0,
+							   deq_ops,
+							   test_data->burst_sz);
+			total_deq_ops += num_deq;
+			if (benchmarking == 0) {
+				for (i = 0; i < num_deq; i++) {
+					struct rte_comp_op *op = deq_ops[i];
+					const void *read_data_addr =
+						rte_pktmbuf_read(op->m_dst, 0,
+						op->produced, output_data_ptr);
+					if (read_data_addr == NULL) {
+						RTE_LOG(ERR, USER1,
+				      "Could not copy buffer in destination\n");
+						res = -1;
+						goto end;
+					}
+
+					if (read_data_addr != output_data_ptr)
+						rte_memcpy(output_data_ptr,
+							rte_pktmbuf_mtod(
+							  op->m_dst, uint8_t *),
+							op->produced);
+					output_data_ptr += op->produced;
+					output_size += op->produced;
+
+				}
+			}
+
+			if (iter == num_iter - 1) {
+				for (i = 0; i < num_deq; i++) {
+					struct rte_comp_op *op = deq_ops[i];
+					struct rte_mbuf *m = op->m_dst;
+
+					m->pkt_len = op->produced;
+					uint32_t remaining_data = op->produced;
+					uint16_t data_to_append;
+
+					while (remaining_data > 0) {
+						data_to_append =
+							RTE_MIN(remaining_data,
+							     test_data->seg_sz);
+						m->data_len = data_to_append;
+						remaining_data -=
+								data_to_append;
+						m = m->next;
+					}
+				}
+			}
+			rte_mempool_put_bulk(test_data->op_pool,
+					     (void **)deq_ops, num_deq);
+			allocated -= num_deq;
+		}
+
+		/* Dequeue the last operations */
+		while (total_deq_ops < total_ops) {
+			num_deq = rte_compressdev_dequeue_burst(dev_id, 0,
+						deq_ops, test_data->burst_sz);
+			total_deq_ops += num_deq;
+			if (benchmarking == 0) {
+				for (i = 0; i < num_deq; i++) {
+					struct rte_comp_op *op = deq_ops[i];
+					const void *read_data_addr =
+						rte_pktmbuf_read(op->m_dst, 0,
+						op->produced, output_data_ptr);
+					if (read_data_addr == NULL) {
+						RTE_LOG(ERR, USER1,
+				      "Could not copy buffer in destination\n");
+						res = -1;
+						goto end;
+					}
+
+					if (read_data_addr != output_data_ptr)
+						rte_memcpy(output_data_ptr,
+							rte_pktmbuf_mtod(
+							op->m_dst, uint8_t *),
+							op->produced);
+					output_data_ptr += op->produced;
+					output_size += op->produced;
+
+				}
+			}
+
+			if (iter == num_iter - 1) {
+				for (i = 0; i < num_deq; i++) {
+					struct rte_comp_op *op = deq_ops[i];
+					struct rte_mbuf *m = op->m_dst;
+
+					m->pkt_len = op->produced;
+					uint32_t remaining_data = op->produced;
+					uint16_t data_to_append;
+
+					while (remaining_data > 0) {
+						data_to_append =
+						RTE_MIN(remaining_data,
+							test_data->seg_sz);
+						m->data_len = data_to_append;
+						remaining_data -=
+								data_to_append;
+						m = m->next;
+					}
+				}
+			}
+			rte_mempool_put_bulk(test_data->op_pool,
+					     (void **)deq_ops, num_deq);
+			allocated -= num_deq;
+		}
+	}
+
+	if (benchmarking) {
+		tsc_end = rte_rdtsc();
+		tsc_duration = tsc_end - tsc_start;
+
+		if (type == RTE_COMP_COMPRESS)
+			test_data->comp_tsc_duration[level] =
+					tsc_duration / num_iter;
+		else
+			test_data->decomp_tsc_duration[level] =
+					tsc_duration / num_iter;
+	}
+
+	if (benchmarking == 0 && output_data_sz)
+		*output_data_sz = output_size;
+end:
+	rte_mempool_put_bulk(test_data->op_pool, (void **)ops, allocated);
+	rte_compressdev_private_xform_free(dev_id, priv_xform);
+	rte_free(ops);
+	return res;
+}
+
 int
 main(int argc, char **argv)
 {
+	uint8_t level, level_idx = 0;
+	uint8_t i;
 	int ret;
 	struct comp_test_data *test_data;
 
@@ -43,9 +751,145 @@ main(int argc, char **argv)
 		goto err;
 	}
 
+	if (comp_perf_initialize_compressdev(test_data) < 0) {
+		ret = EXIT_FAILURE;
+		goto err;
+	}
+
+	if (comp_perf_dump_input_data(test_data) < 0) {
+		ret = EXIT_FAILURE;
+		goto err;
+	}
+
+	if (comp_perf_allocate_memory(test_data) < 0) {
+		ret = EXIT_FAILURE;
+		goto err;
+	}
+
+	if (prepare_bufs(test_data) < 0) {
+		ret = EXIT_FAILURE;
+		goto err;
+	}
+
+	if (test_data->level.inc != 0)
+		level = test_data->level.min;
+	else
+		level = test_data->level.list[0];
+
+	size_t comp_data_sz;
+	size_t decomp_data_sz;
+
+	printf("Burst size = %u\n", test_data->burst_sz);
+	printf("File size = %zu\n", test_data->input_data_sz);
+
+	printf("%6s%12s%17s%19s%21s%15s%21s%23s%16s\n",
+		"Level", "Comp size", "Comp ratio [%]",
+		"Comp [Cycles/it]", "Comp [Cycles/Byte]", "Comp [Gbps]",
+		"Decomp [Cycles/it]", "Decomp [Cycles/Byte]", "Decomp [Gbps]");
+
+	while (level <= test_data->level.max) {
+		/*
+		 * Run a first iteration, to verify compression and
+		 * get the compression ratio for the level
+		 */
+		if (main_loop(test_data, level, RTE_COMP_COMPRESS,
+			      test_data->compressed_data,
+			      &comp_data_sz, 0) < 0) {
+			ret = EXIT_FAILURE;
+			goto err;
+		}
+
+		if (main_loop(test_data, level, RTE_COMP_DECOMPRESS,
+			      test_data->decompressed_data,
+			      &decomp_data_sz, 0) < 0) {
+			ret = EXIT_FAILURE;
+			goto err;
+		}
+
+		if (decomp_data_sz != test_data->input_data_sz) {
+			RTE_LOG(ERR, USER1,
+		   "Decompressed data length not equal to input data length\n");
+			RTE_LOG(ERR, USER1,
+				"Decompressed size = %zu, expected = %zu\n",
+				decomp_data_sz, test_data->input_data_sz);
+			ret = EXIT_FAILURE;
+			goto err;
+		} else {
+			if (memcmp(test_data->decompressed_data,
+					test_data->input_data,
+					test_data->input_data_sz) != 0) {
+				RTE_LOG(ERR, USER1,
+			    "Decompressed data is not the same as file data\n");
+				ret = EXIT_FAILURE;
+				goto err;
+			}
+		}
+
+		double ratio = (double) comp_data_sz /
+						test_data->input_data_sz * 100;
+
+		/*
+		 * Run the tests twice, discarding the first performance
+		 * results, before the cache is warmed up
+		 */
+		for (i = 0; i < 2; i++) {
+			if (main_loop(test_data, level, RTE_COMP_COMPRESS,
+					NULL, NULL, 1) < 0) {
+				ret = EXIT_FAILURE;
+				goto err;
+			}
+		}
+
+		for (i = 0; i < 2; i++) {
+			if (main_loop(test_data, level, RTE_COMP_DECOMPRESS,
+					NULL, NULL, 1) < 0) {
+				ret = EXIT_FAILURE;
+				goto err;
+			}
+		}
+
+		uint64_t comp_tsc_duration =
+				test_data->comp_tsc_duration[level];
+		double comp_tsc_byte = (double)comp_tsc_duration /
+						test_data->input_data_sz;
+		double comp_gbps = rte_get_tsc_hz() / comp_tsc_byte * 8 /
+				1000000000;
+		uint64_t decomp_tsc_duration =
+				test_data->decomp_tsc_duration[level];
+		double decomp_tsc_byte = (double)decomp_tsc_duration /
+						test_data->input_data_sz;
+		double decomp_gbps = rte_get_tsc_hz() / decomp_tsc_byte * 8 /
+				1000000000;
+
+		printf("%6u%12zu%17.2f%19"PRIu64"%21.2f"
+					"%15.2f%21"PRIu64"%23.2f%16.2f\n",
+		       level, comp_data_sz, ratio, comp_tsc_duration,
+		       comp_tsc_byte, comp_gbps, decomp_tsc_duration,
+		       decomp_tsc_byte, decomp_gbps);
+
+		if (test_data->level.inc != 0)
+			level += test_data->level.inc;
+		else {
+			if (++level_idx == test_data->level.count)
+				break;
+			level = test_data->level.list[level_idx];
+		}
+	}
+
 	ret = EXIT_SUCCESS;
 
 err:
+	if (test_data->cdev_id != -1)
+		rte_compressdev_stop(test_data->cdev_id);
+
+	free_bufs(test_data);
+	rte_free(test_data->compressed_data);
+	rte_free(test_data->decompressed_data);
+	rte_free(test_data->input_data);
+	rte_mempool_free(test_data->comp_buf_pool);
+	rte_mempool_free(test_data->decomp_buf_pool);
+	rte_mempool_free(test_data->op_pool);
+
 	rte_free(test_data);
 
 	return ret;
-- 
2.7.4



More information about the dev mailing list