[dpdk-dev] [PATCH 2/4] net/mlx5: add definitions for DV encap and decap

Dekel Peled dekelp at mellanox.com
Wed Oct 3 09:27:42 CEST 2018


Thanks, PSB.

> -----Original Message-----
> From: Yongseok Koh
> Sent: Wednesday, October 3, 2018 5:59 AM
> To: Dekel Peled <dekelp at mellanox.com>
> Cc: dev at dpdk.org; Shahaf Shuler <shahafs at mellanox.com>; Ori Kam
> <orika at mellanox.com>
> Subject: Re: [PATCH 2/4] net/mlx5: add definitions for DV encap and decap
> 
> On Thu, Sep 27, 2018 at 05:50:43PM +0300, Dekel Peled wrote:
> > This patch add the required definitions for DV encap/decap actions.
> > It also adds usage of the new actions definition in validation
> > function of existing drop operation.
> >
> > Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> > ---
> >  drivers/net/mlx5/mlx5_flow.c | 10 ++++++++++
> > drivers/net/mlx5/mlx5_flow.h |  7 +++++++
> >  2 files changed, 17 insertions(+)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow.c
> > b/drivers/net/mlx5/mlx5_flow.c index 79a06df..fed0d29 100644
> > --- a/drivers/net/mlx5/mlx5_flow.c
> > +++ b/drivers/net/mlx5/mlx5_flow.c
> > @@ -768,6 +768,16 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> >  					  RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> >  					  "can't have 2 fate actions in"
> >  					  " same flow");
> > +	if (action_flags & (MLX5_ACTION_TUNNEL_DECAP |
> > +			    MLX5_ACTION_TUNNEL_DECAP_L3 |
> > +			    MLX5_ACTION_TUNNEL_ENCAP |
> > +			    MLX5_ACTION_TUNNEL_ENCAP_L3))
> > +		return rte_flow_error_set(error,
> > +					  ENOTSUP,
> 
> Shouldn't it be EINVAL?

OK.

> 
> > +					  RTE_FLOW_ERROR_TYPE_ACTION,
> > +					  NULL,
> > +					  "can't encap or decap and drop in"
> > +					  " same flow");
> >  	if (attr->egress)
> >  		return rte_flow_error_set(error, ENOTSUP,
> >
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, diff --git
> > a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h index
> > a353d07..4a4f923 100644
> > --- a/drivers/net/mlx5/mlx5_flow.h
> > +++ b/drivers/net/mlx5/mlx5_flow.h
> > @@ -90,6 +90,10 @@
> >  #define MLX5_ACTION_OF_PUSH_VLAN (1u << 8)  #define
> > MLX5_ACTION_OF_SET_VLAN_VID (1u << 9)  #define
> > MLX5_ACTION_OF_SET_VLAN_PCP (1u << 10)
> > +#define MLX5_ACTION_TUNNEL_ENCAP (1u << 11) #define
> > +MLX5_ACTION_TUNNEL_DECAP (1u << 12) #define
> > +MLX5_ACTION_TUNNEL_ENCAP_L3 (1u << 13) #define
> > +MLX5_ACTION_TUNNEL_DECAP_L3 (1u << 14)
> 
> Please rebase it on top of my multi-table patchset, which is PR #878 because
> it also adds new actions.

Will do.

> >
> >  /* possible L3 layers protocols filtering. */  #define
> > MLX5_IP_PROTOCOL_TCP 6 @@ -175,6 +179,9 @@ struct mlx5_flow_dv {
> > #ifdef HAVE_IBV_FLOW_DV_SUPPORT
> >  	struct mlx5dv_flow_action_attr
> actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS];
> >  	/**< Action list. */
> > +
> 
> No blank line.

OK.

> 
> > +	struct ibv_flow_action *encap_verb; /**< Verbs object of encap. */
> > +	struct ibv_flow_action *decap_verb; /**< Verbs object of decap. */
> >  #endif
> >  	int actions_n; /**< number of actions. */  };
> > --
> > 1.8.3.1
> >


More information about the dev mailing list