[dpdk-dev] [PATCH 2/3] ethdev: add flow api actions to modify TCP/UDP port numbers

Ori Kam orika at mellanox.com
Thu Oct 4 15:55:13 CEST 2018



> -----Original Message-----
> From: dev <dev-bounces at dpdk.org> On Behalf Of Rahul Lakkireddy
> Sent: Monday, September 24, 2018 11:28 AM
> To: dev at dpdk.org
> Cc: indranil at chelsio.com; nirranjan at chelsio.com
> Subject: [dpdk-dev] [PATCH 2/3] ethdev: add flow api actions to modify
> TCP/UDP port numbers
> 
> Add actions:
> - SET_TP_SRC - set a new TCP/UDP source port number.
> - SET_TP_DST - set a new TCP/UDP destination port number.
> 
> Original work by Shagun Agrawal
> 
> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy at chelsio.com>
> ---
> Changes since RFC v2:
> - Updated comments, help messages, and doc to indicate that IP/TCP/UDP
>   of the outermost headers are modified.
> - Updated comments and doc to indicate that a corresponding valid flow
>   pattern item must be specified to offload corresponding header rewrite
>   action.
> - Updated release notes.
> 
>  app/test-pmd/cmdline_flow.c                 | 52 +++++++++++++++++++++
>  app/test-pmd/config.c                       |  4 ++
>  doc/guides/prog_guide/rte_flow.rst          | 36 ++++++++++++++
>  doc/guides/rel_notes/release_18_11.rst      |  2 +
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst | 10 ++++
>  lib/librte_ethdev/rte_flow.c                |  4 ++
>  lib/librte_ethdev/rte_flow.h                | 37 +++++++++++++++
>  7 files changed, 145 insertions(+)
> 
> diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
> index 1432498a3..a9888cacf 100644
> --- a/app/test-pmd/cmdline_flow.c
> +++ b/app/test-pmd/cmdline_flow.c
> @@ -251,6 +251,10 @@ enum index {
>  	ACTION_SET_IPV6_SRC_IPV6_SRC,
>  	ACTION_SET_IPV6_DST,
>  	ACTION_SET_IPV6_DST_IPV6_DST,
> +	ACTION_SET_TP_SRC,
> +	ACTION_SET_TP_SRC_TP_SRC,
> +	ACTION_SET_TP_DST,
> +	ACTION_SET_TP_DST_TP_DST,
>  };
> 
>  /** Maximum size for pattern in struct rte_flow_item_raw. */
> @@ -828,6 +832,8 @@ static const enum index next_action[] = {
>  	ACTION_SET_IPV4_DST,
>  	ACTION_SET_IPV6_SRC,
>  	ACTION_SET_IPV6_DST,
> +	ACTION_SET_TP_SRC,
> +	ACTION_SET_TP_DST,
>  	ZERO,
>  };
> 
> @@ -954,6 +960,18 @@ static const enum index action_set_ipv6_dst[] = {
>  	ZERO,
>  };
> 
> +static const enum index action_set_tp_src[] = {
> +	ACTION_SET_TP_SRC_TP_SRC,
> +	ACTION_NEXT,
> +	ZERO,
> +};
> +
> +static const enum index action_set_tp_dst[] = {
> +	ACTION_SET_TP_DST_TP_DST,
> +	ACTION_NEXT,
> +	ZERO,
> +};
> +
>  static const enum index action_jump[] = {
>  	ACTION_JUMP_GROUP,
>  	ACTION_NEXT,
> @@ -2574,6 +2592,40 @@ static const struct token token_list[] = {
>  			(struct rte_flow_action_set_ipv6, ipv6_addr)),
>  		.call = parse_vc_conf,
>  	},
> +	[ACTION_SET_TP_SRC] = {
> +		.name = "set_tp_src",
> +		.help = "set a new source port number in the outermost"
> +			" TCP/UDP header",
> +		.priv = PRIV_ACTION(SET_TP_SRC,
> +			sizeof(struct rte_flow_action_set_tp)),
> +		.next = NEXT(action_set_tp_src),
> +		.call = parse_vc,
> +	},
> +	[ACTION_SET_TP_SRC_TP_SRC] = {
> +		.name = "port",
> +		.help = "new source port number to set",
> +		.next = NEXT(action_set_tp_src, NEXT_ENTRY(UNSIGNED)),
> +		.args = ARGS(ARGS_ENTRY_HTON
> +			     (struct rte_flow_action_set_tp, port)),
> +		.call = parse_vc_conf,
> +	},
> +	[ACTION_SET_TP_DST] = {
> +		.name = "set_tp_dst",
> +		.help = "set a new destination port number in the outermost"
> +			" TCP/UDP header",
> +		.priv = PRIV_ACTION(SET_TP_DST,
> +			sizeof(struct rte_flow_action_set_tp)),
> +		.next = NEXT(action_set_tp_dst),
> +		.call = parse_vc,
> +	},
> +	[ACTION_SET_TP_DST_TP_DST] = {
> +		.name = "port",
> +		.help = "new destination port number to set",
> +		.next = NEXT(action_set_tp_dst, NEXT_ENTRY(UNSIGNED)),
> +		.args = ARGS(ARGS_ENTRY_HTON
> +			     (struct rte_flow_action_set_tp, port)),
> +		.call = parse_vc_conf,
> +	},
>  };
> 
>  /** Remove and return last entry from argument stack. */
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index 14dbdf7a3..1629a6d7a 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -1180,6 +1180,10 @@ static const struct {
>  		       sizeof(struct rte_flow_action_set_ipv6)),
>  	MK_FLOW_ACTION(SET_IPV6_DST,
>  		       sizeof(struct rte_flow_action_set_ipv6)),
> +	MK_FLOW_ACTION(SET_TP_SRC,
> +		       sizeof(struct rte_flow_action_set_tp)),
> +	MK_FLOW_ACTION(SET_TP_DST,
> +		       sizeof(struct rte_flow_action_set_tp)),
>  };
> 
>  /** Compute storage space needed by action configuration and copy it. */
> diff --git a/doc/guides/prog_guide/rte_flow.rst
> b/doc/guides/prog_guide/rte_flow.rst
> index b9bcaa3d1..4be160209 100644
> --- a/doc/guides/prog_guide/rte_flow.rst
> +++ b/doc/guides/prog_guide/rte_flow.rst
> @@ -2148,6 +2148,42 @@ Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error
> will be returned.
>     | ``ipv6_addr`` | new IPv6 destination address |
>     +---------------+------------------------------+
> 
> +Action: ``SET_TP_SRC``
> +^^^^^^^^^^^^^^^^^^^^^^^^^
> +
> +Set a new source port number in the outermost TCP/UDP header.
> +
> +It must be used with a valid RTE_FLOW_ITEM_TYPE_TCP or
> RTE_FLOW_ITEM_TYPE_UDP
> +flow pattern item. Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be
> returned.
> +
> +.. _table_rte_flow_action_set_tp_src:
> +
> +.. table:: SET_TP_SRC
> +
> +   +----------+-------------------------+
> +   | Field    | Value                   |
> +   +==========+=========================+
> +   | ``port`` | new TCP/UDP source port |
> +   +---------------+--------------------+
> +
> +Action: ``SET_TP_DST``
> +^^^^^^^^^^^^^^^^^^^^^^^^^
> +
> +Set a new destination port number in the outermost TCP/UDP header.
> +
> +It must be used with a valid RTE_FLOW_ITEM_TYPE_TCP or
> RTE_FLOW_ITEM_TYPE_UDP
> +flow pattern item. Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be
> returned.
> +
> +.. _table_rte_flow_action_set_tp_dst:
> +
> +.. table:: SET_TP_DST
> +
> +   +----------+------------------------------+
> +   | Field    | Value                        |
> +   +==========+==============================+
> +   | ``port`` | new TCP/UDP destination port |
> +   +---------------+-------------------------+
> +
>  Negative types
>  ~~~~~~~~~~~~~~
> 
> diff --git a/doc/guides/rel_notes/release_18_11.rst
> b/doc/guides/rel_notes/release_18_11.rst
> index 782722318..84b0a6a4b 100644
> --- a/doc/guides/rel_notes/release_18_11.rst
> +++ b/doc/guides/rel_notes/release_18_11.rst
> @@ -93,6 +93,8 @@ New Features
> 
>    * Modify source and destination IP addresses in the outermost IPv4/IPv6
>      headers.
> +  * Modify source and destination port numbers in the outermost TCP/UDP
> +    headers.
> 
>  API Changes
>  -----------
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 97d91f066..ffec7013b 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -3722,6 +3722,16 @@ This section lists supported actions and their
> attributes, if any.
> 
>    - ``ipv6_addr``: New IPv6 destination address.
> 
> +- ``of_set_tp_src``: Set a new source port number in the outermost TCP/UDP
> +  header.
> +
> +  - ``port``: New TCP/UDP source port number.
> +
> +- ``of_set_tp_dst``: Set a new destination port number in the outermost
> TCP/UDP
> +  header.
> +
> +  - ``port``: New TCP/UDP destination port number.
> +
>  Destroying flow rules
>  ~~~~~~~~~~~~~~~~~~~~~
> 
> diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
> index d4f1b9a05..409c79741 100644
> --- a/lib/librte_ethdev/rte_flow.c
> +++ b/lib/librte_ethdev/rte_flow.c
> @@ -117,6 +117,10 @@ static const struct rte_flow_desc_data
> rte_flow_desc_action[] = {
>  		       sizeof(struct rte_flow_action_set_ipv6)),
>  	MK_FLOW_ACTION(SET_IPV6_DST,
>  		       sizeof(struct rte_flow_action_set_ipv6)),
> +	MK_FLOW_ACTION(SET_TP_SRC,
> +		       sizeof(struct rte_flow_action_set_tp)),
> +	MK_FLOW_ACTION(SET_TP_DST,
> +		       sizeof(struct rte_flow_action_set_tp)),
>  };
> 
>  static int
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index 0fe91ae89..cf5cecf42 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -1545,6 +1545,28 @@ enum rte_flow_action_type {
>  	 * See struct rte_flow_action_set_ipv6.
>  	 */
>  	RTE_FLOW_ACTION_TYPE_SET_IPV6_DST,
> +
> +	/**
> +	 * Modify source port number in the outermost TCP/UDP header.
> +	 *
> +	 * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_TCP
> +	 * or RTE_FLOW_ITEM_TYPE_UDP, then the PMD should return a
> +	 * RTE_FLOW_ERROR_TYPE_ACTION error.
> +	 *
> +	 * See struct rte_flow_action_set_tp.
> +	 */
> +	RTE_FLOW_ACTION_TYPE_SET_TP_SRC,
> +
> +	/**
> +	 * Modify destination port number in the outermost TCP/UDP header.
> +	 *
> +	 * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_TCP
> +	 * or RTE_FLOW_ITEM_TYPE_UDP, then the PMD should return a
> +	 * RTE_FLOW_ERROR_TYPE_ACTION error.
> +	 *
> +	 * See struct rte_flow_action_set_tp.
> +	 */
> +	RTE_FLOW_ACTION_TYPE_SET_TP_DST,
>  };
> 
>  /**
> @@ -1938,6 +1960,21 @@ struct rte_flow_action_set_ipv6 {
>  	uint8_t ipv6_addr[16];
>  };
> 
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this structure may change without prior notice
> + *
> + * RTE_FLOW_ACTION_TYPE_SET_TP_SRC
> + * RTE_FLOW_ACTION_TYPE_SET_TP_DST
> + *
> + * Allows modification of source (RTE_FLOW_ACTION_TYPE_SET_TP_SRC)
> + * and destination (RTE_FLOW_ACTION_TYPE_SET_TP_DST) port numbers
> + * in the specified outermost TCP/UDP header.
> + */
> +struct rte_flow_action_set_tp {
> +	uint16_t port;
> +};
> +
>  /*
>   * Definition of a single action.
>   *
> --
> 2.18.0

Acked-by: Ori Kam <orika at mellanox.com>


More information about the dev mailing list