[dpdk-dev] [PATCH v3 05/32] crypto/octeontx: add hardware init routine
Anoob Joseph
anoob.joseph at caviumnetworks.com
Fri Oct 5 14:58:56 CEST 2018
Adding hardware init routine for OCTEON TX crypto device. A place holder
is added for misc polling routine. That will be added in the further
patches.
Signed-off-by: Ankur Dwivedi <ankur.dwivedi at caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph at caviumnetworks.com>
Signed-off-by: Murthy NSSR <nidadavolu.murthy at caviumnetworks.com>
Signed-off-by: Nithin Dabilpuram <nithin.dabilpuram at caviumnetworks.com>
Signed-off-by: Ragothaman Jayaraman <rjayaraman at caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan at caviumnetworks.com>
Signed-off-by: Tejasree Kondoj <kondoj.tejasree at caviumnetworks.com>
---
drivers/crypto/octeontx/Makefile | 1 +
drivers/crypto/octeontx/meson.build | 1 +
drivers/crypto/octeontx/otx_cryptodev_hw_access.c | 48 ++++++++++++
drivers/crypto/octeontx/otx_cryptodev_hw_access.h | 87 +++++++++++++++++++++
drivers/crypto/octeontx/otx_cryptodev_ops.c | 92 ++++++++++++++++++++++-
5 files changed, 228 insertions(+), 1 deletion(-)
create mode 100644 drivers/crypto/octeontx/otx_cryptodev_hw_access.c
diff --git a/drivers/crypto/octeontx/Makefile b/drivers/crypto/octeontx/Makefile
index 12fec75..4582540 100644
--- a/drivers/crypto/octeontx/Makefile
+++ b/drivers/crypto/octeontx/Makefile
@@ -24,6 +24,7 @@ CFLAGS += -I$(RTE_SDK)/drivers/common/cpt
# PMD code
SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev_hw_access.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev_ops.c
# export include files
diff --git a/drivers/crypto/octeontx/meson.build b/drivers/crypto/octeontx/meson.build
index 6564090..eca1cf1 100644
--- a/drivers/crypto/octeontx/meson.build
+++ b/drivers/crypto/octeontx/meson.build
@@ -8,6 +8,7 @@ deps += ['bus_pci']
name = 'octeontx_crypto'
sources = files('otx_cryptodev.c',
+ 'otx_cryptodev_hw_access.c',
'otx_cryptodev_ops.c')
cflags += '-DCPT_MODEL=CRYPTO_OCTEONTX'
diff --git a/drivers/crypto/octeontx/otx_cryptodev_hw_access.c b/drivers/crypto/octeontx/otx_cryptodev_hw_access.c
new file mode 100644
index 0000000..99fe3cf
--- /dev/null
+++ b/drivers/crypto/octeontx/otx_cryptodev_hw_access.c
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Cavium, Inc
+ */
+#include <string.h>
+
+#include <rte_common.h>
+
+#include "otx_cryptodev_hw_access.h"
+
+#include "cpt_pmd_logs.h"
+
+static int
+otx_cpt_vf_init(struct cpt_vf *cptvf)
+{
+ int ret = 0;
+
+ CPT_LOG_DP_DEBUG("%s: %s done", cptvf->dev_name, __func__);
+
+ return ret;
+}
+
+void
+otx_cpt_poll_misc(struct cpt_vf *cptvf)
+{
+ RTE_SET_USED(cptvf);
+}
+
+int
+otx_cpt_hw_init(struct cpt_vf *cptvf, void *pdev, void *reg_base, char *name)
+{
+ memset(cptvf, 0, sizeof(struct cpt_vf));
+
+ /* Bar0 base address */
+ cptvf->reg_base = reg_base;
+ strncpy(cptvf->dev_name, name, 32);
+
+ cptvf->pdev = pdev;
+
+ /* To clear if there are any pending mbox msgs */
+ otx_cpt_poll_misc(cptvf);
+
+ if (otx_cpt_vf_init(cptvf)) {
+ CPT_LOG_ERR("Failed to initialize CPT VF device");
+ return -1;
+ }
+
+ return 0;
+}
diff --git a/drivers/crypto/octeontx/otx_cryptodev_hw_access.h b/drivers/crypto/octeontx/otx_cryptodev_hw_access.h
index 288ee41..1e1877c 100644
--- a/drivers/crypto/octeontx/otx_cryptodev_hw_access.h
+++ b/drivers/crypto/octeontx/otx_cryptodev_hw_access.h
@@ -5,6 +5,85 @@
#ifndef _OTX_CRYPTODEV_HW_ACCESS_H_
#define _OTX_CRYPTODEV_HW_ACCESS_H_
+#include <stdbool.h>
+
+#include <rte_memory.h>
+
+#include "cpt_common.h"
+
+#define CPT_INTR_POLL_INTERVAL_MS (50)
+
+/* Default command queue length */
+#define DEFAULT_CMD_QCHUNKS 2
+
+/* cpt instance */
+struct cpt_instance {
+ uint32_t queue_id;
+ uintptr_t rsvd;
+};
+
+struct command_chunk {
+ /** 128-byte aligned real_vaddr */
+ uint8_t *head;
+ /** 128-byte aligned real_dma_addr */
+ phys_addr_t dma_addr;
+};
+
+/**
+ * Command queue structure
+ */
+struct command_queue {
+ /** Command queue host write idx */
+ uint32_t idx;
+ /** Command queue chunk */
+ uint32_t cchunk;
+ /** Command queue head; instructions are inserted here */
+ uint8_t *qhead;
+ /** Command chunk list head */
+ struct command_chunk chead[DEFAULT_CMD_QCHUNKS];
+};
+
+/**
+ * CPT VF device structure
+ */
+struct cpt_vf {
+ /** CPT instance */
+ struct cpt_instance instance;
+ /** Register start address */
+ uint8_t *reg_base;
+ /** Command queue information */
+ struct command_queue cqueue;
+ /** Pending queue information */
+ struct pending_queue pqueue;
+ /** Meta information per vf */
+ struct cptvf_meta_info meta_info;
+
+ /** Below fields are accessed only in control path */
+
+ /** Env specific pdev representing the pci dev */
+ void *pdev;
+ /** Calculated queue size */
+ uint32_t qsize;
+ /** Device index (0...CPT_MAX_VQ_NUM)*/
+ uint8_t vfid;
+ /** VF type of cpt_vf_type_t (SE_TYPE(2) or AE_TYPE(1) */
+ uint8_t vftype;
+ /** VF group (0 - 8) */
+ uint8_t vfgrp;
+ /** Operating node: Bits (46:44) in BAR0 address */
+ uint8_t node;
+
+ /** VF-PF mailbox communication */
+
+ /** Flag if acked */
+ bool pf_acked;
+ /** Flag if not acked */
+ bool pf_nacked;
+
+ /** Device name */
+ char dev_name[32];
+} __rte_cache_aligned;
+
/*
* CPT Registers map for 81xx
*/
@@ -44,4 +123,12 @@
((a) & 0x1) + 0x100000ll * (b) + \
8ll * ((c) & 0x1))
+/* VF HAL functions */
+
+void
+otx_cpt_poll_misc(struct cpt_vf *cptvf);
+
+int
+otx_cpt_hw_init(struct cpt_vf *cptvf, void *pdev, void *reg_base, char *name);
+
#endif /* _OTX_CRYPTODEV_HW_ACCESS_H_ */
diff --git a/drivers/crypto/octeontx/otx_cryptodev_ops.c b/drivers/crypto/octeontx/otx_cryptodev_ops.c
index 1b5f108..3bf6cd2 100644
--- a/drivers/crypto/octeontx/otx_cryptodev_ops.c
+++ b/drivers/crypto/octeontx/otx_cryptodev_ops.c
@@ -2,14 +2,104 @@
* Copyright(c) 2018 Cavium, Inc
*/
+#include <rte_alarm.h>
+#include <rte_bus_pci.h>
#include <rte_cryptodev.h>
+#include <rte_malloc.h>
+
+#include "cpt_pmd_logs.h"
#include "otx_cryptodev.h"
+#include "otx_cryptodev_hw_access.h"
#include "otx_cryptodev_ops.h"
+/* Alarm routines */
+
+static void
+otx_cpt_alarm_cb(void *arg)
+{
+ struct cpt_vf *cptvf = arg;
+ otx_cpt_poll_misc(cptvf);
+ rte_eal_alarm_set(CPT_INTR_POLL_INTERVAL_MS * 1000,
+ otx_cpt_alarm_cb, cptvf);
+}
+
+static int
+otx_cpt_periodic_alarm_start(void *arg)
+{
+ return rte_eal_alarm_set(CPT_INTR_POLL_INTERVAL_MS * 1000,
+ otx_cpt_alarm_cb, arg);
+}
+
int
otx_cpt_dev_create(struct rte_cryptodev *c_dev)
{
- RTE_SET_USED(c_dev);
+ struct rte_pci_device *pdev = RTE_DEV_TO_PCI(c_dev->device);
+ struct cpt_vf *cptvf = NULL;
+ void *reg_base;
+ char dev_name[32];
+ int ret;
+
+ if (pdev->mem_resource[0].phys_addr == 0ULL)
+ return -EIO;
+
+ /* for secondary processes, we don't initialise any further as primary
+ * has already done this work.
+ */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ cptvf = rte_zmalloc_socket("otx_cryptodev_private_mem",
+ sizeof(struct cpt_vf), RTE_CACHE_LINE_SIZE,
+ rte_socket_id());
+
+ if (cptvf == NULL) {
+ CPT_LOG_ERR("Cannot allocate memory for device private data");
+ return -ENOMEM;
+ }
+
+ snprintf(dev_name, 32, "%02x:%02x.%x",
+ pdev->addr.bus, pdev->addr.devid, pdev->addr.function);
+
+ reg_base = pdev->mem_resource[0].addr;
+ if (!reg_base) {
+ CPT_LOG_ERR("Failed to map BAR0 of %s", dev_name);
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ ret = otx_cpt_hw_init(cptvf, pdev, reg_base, dev_name);
+ if (ret) {
+ CPT_LOG_ERR("Failed to init cptvf %s", dev_name);
+ ret = -EIO;
+ goto fail;
+ }
+
+ /* Start off timer for mailbox interrupts */
+ otx_cpt_periodic_alarm_start(cptvf);
+
+ c_dev->dev_ops = NULL;
+
+ c_dev->enqueue_burst = NULL;
+ c_dev->dequeue_burst = NULL;
+
+ c_dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+ RTE_CRYPTODEV_FF_HW_ACCELERATED |
+ RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
+ RTE_CRYPTODEV_FF_IN_PLACE_SGL |
+ RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT |
+ RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT;
+
+ /* Save dev private data */
+ c_dev->data->dev_private = cptvf;
+
return 0;
+
+fail:
+ if (cptvf) {
+ /* Free private data allocated */
+ rte_free(cptvf);
+ }
+
+ return ret;
}
--
2.7.4
More information about the dev
mailing list