[dpdk-dev] [PATCH v3 30/32] crypto/octeontx: add dequeue burst op

Anoob Joseph anoob.joseph at caviumnetworks.com
Fri Oct 5 14:59:21 CEST 2018


From: Tejasree Kondoj <kondoj.tejasree at caviumnetworks.com>

Signed-off-by: Ankur Dwivedi <ankur.dwivedi at caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph at caviumnetworks.com>
Signed-off-by: Murthy NSSR <nidadavolu.murthy at caviumnetworks.com>
Signed-off-by: Nithin Dabilpuram <nithin.dabilpuram at caviumnetworks.com>
Signed-off-by: Ragothaman Jayaraman <rjayaraman at caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan at caviumnetworks.com>
Signed-off-by: Tejasree Kondoj <kondoj.tejasree at caviumnetworks.com>
---
 drivers/crypto/octeontx/otx_cryptodev_hw_access.h | 69 +++++++++++++++++++++--
 drivers/crypto/octeontx/otx_cryptodev_ops.c       | 47 ++++++++++++++-
 2 files changed, 110 insertions(+), 6 deletions(-)

diff --git a/drivers/crypto/octeontx/otx_cryptodev_hw_access.h b/drivers/crypto/octeontx/otx_cryptodev_hw_access.h
index 6f4d6e1..82b15ee 100644
--- a/drivers/crypto/octeontx/otx_cryptodev_hw_access.h
+++ b/drivers/crypto/octeontx/otx_cryptodev_hw_access.h
@@ -1,19 +1,20 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  * Copyright(c) 2018 Cavium, Inc
  */
-
 #ifndef _OTX_CRYPTODEV_HW_ACCESS_H_
 #define _OTX_CRYPTODEV_HW_ACCESS_H_
 
 #include <stdbool.h>
 
 #include <rte_branch_prediction.h>
+#include <rte_cycles.h>
 #include <rte_io.h>
 #include <rte_memory.h>
 #include <rte_prefetch.h>
 
 #include "cpt_common.h"
 #include "cpt_hw_types.h"
+#include "cpt_mcode_defines.h"
 #include "cpt_pmd_logs.h"
 
 #define CPT_INTR_POLL_INTERVAL_MS	(50)
@@ -252,10 +253,68 @@ static __rte_always_inline uint8_t
 check_nb_command_id(struct cpt_request_info *user_req,
 		struct cpt_instance *instance)
 {
-	/* Required for dequeue operation. Adding a dummy routine for now */
-	RTE_SET_USED(user_req);
-	RTE_SET_USED(instance);
-	return 0;
+	uint8_t ret = ERR_REQ_PENDING;
+	struct cpt_vf *cptvf = (struct cpt_vf *)instance;
+	volatile cpt_res_s_t *cptres;
+
+	cptres = (volatile cpt_res_s_t *)user_req->completion_addr;
+
+	if (unlikely(cptres->s8x.compcode == CPT_8X_COMP_E_NOTDONE)) {
+		/*
+		 * Wait for some time for this command to get completed
+		 * before timing out
+		 */
+		if (rte_get_timer_cycles() < user_req->time_out)
+			return ret;
+		/*
+		 * TODO: See if alternate caddr can be used to not loop
+		 * longer than needed.
+		 */
+		if ((cptres->s8x.compcode == CPT_8X_COMP_E_NOTDONE) &&
+		    (user_req->extra_time < TIME_IN_RESET_COUNT)) {
+			user_req->extra_time++;
+			return ret;
+		}
+
+		if (cptres->s8x.compcode != CPT_8X_COMP_E_NOTDONE)
+			goto complete;
+
+		ret = ERR_REQ_TIMEOUT;
+		CPT_LOG_DP_ERR("Request %p timedout", user_req);
+		otx_cpt_poll_misc(cptvf);
+		goto exit;
+	}
+
+complete:
+	if (likely(cptres->s8x.compcode == CPT_8X_COMP_E_GOOD)) {
+		ret = 0; /* success */
+		if (unlikely((uint8_t)*user_req->alternate_caddr)) {
+			ret = (uint8_t)*user_req->alternate_caddr;
+			CPT_LOG_DP_ERR("Request %p : failed with microcode"
+				" error, MC completion code : 0x%x", user_req,
+				ret);
+		}
+		CPT_LOG_DP_DEBUG("MC status %.8x\n",
+			   *((volatile uint32_t *)user_req->alternate_caddr));
+		CPT_LOG_DP_DEBUG("HW status %.8x\n",
+			   *((volatile uint32_t *)user_req->completion_addr));
+	} else if ((cptres->s8x.compcode == CPT_8X_COMP_E_SWERR) ||
+		   (cptres->s8x.compcode == CPT_8X_COMP_E_FAULT)) {
+		ret = (uint8_t)*user_req->alternate_caddr;
+		if (!ret)
+			ret = ERR_BAD_ALT_CCODE;
+		CPT_LOG_DP_DEBUG("Request %p : failed with %s : err code :%x",
+			   user_req,
+			   (cptres->s8x.compcode == CPT_8X_COMP_E_FAULT) ?
+			   "DMA Fault" : "Software error", ret);
+	} else {
+		CPT_LOG_DP_ERR("Request %p : unexpected completion code %d",
+			   user_req, cptres->s8x.compcode);
+		ret = (uint8_t)*user_req->alternate_caddr;
+	}
+
+exit:
+	return ret;
 }
 
 #endif /* _OTX_CRYPTODEV_HW_ACCESS_H_ */
diff --git a/drivers/crypto/octeontx/otx_cryptodev_ops.c b/drivers/crypto/octeontx/otx_cryptodev_ops.c
index 4240051..23f9659 100644
--- a/drivers/crypto/octeontx/otx_cryptodev_ops.c
+++ b/drivers/crypto/octeontx/otx_cryptodev_ops.c
@@ -366,6 +366,51 @@ otx_cpt_pkt_enqueue(void *qptr, struct rte_crypto_op **ops, uint16_t nb_ops)
 	return count;
 }
 
+static uint16_t
+otx_cpt_pkt_dequeue(void *qptr, struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+	struct cpt_instance *instance = (struct cpt_instance *)qptr;
+	struct cpt_vf *cptvf = (struct cpt_vf *)instance;
+	struct pending_queue *pqueue = &cptvf->pqueue;
+	uint16_t nb_completed, i = 0;
+	uint8_t compcode[nb_ops];
+
+	nb_completed = cpt_dequeue_burst(instance, nb_ops,
+					 (void **)ops, compcode, pqueue);
+	while (likely(i < nb_completed)) {
+		struct rte_crypto_op *cop;
+		void *metabuf;
+		uintptr_t *rsp;
+		uint8_t status;
+
+		rsp = (void *)ops[i];
+		status = compcode[i];
+		if (likely((i + 1) < nb_completed))
+			rte_prefetch0(ops[i+1]);
+		metabuf = (void *)rsp[0];
+		cop = (void *)rsp[1];
+
+		ops[i] = cop;
+
+		if (likely(status == 0)) {
+			if (likely(!rsp[2]))
+				cop->status =
+					RTE_CRYPTO_OP_STATUS_SUCCESS;
+			else
+				compl_auth_verify(cop, (uint8_t *)rsp[2],
+						  rsp[3]);
+		} else if (status == ERR_GC_ICV_MISCOMPARE) {
+			/*auth data mismatch */
+			cop->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+		} else {
+			cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
+		}
+		free_op_meta(metabuf, cptvf->meta_info.cptvf_meta_pool);
+		i++;
+	}
+	return nb_completed;
+}
+
 static struct rte_cryptodev_ops cptvf_ops = {
 	/* Device related operations */
 	.dev_configure = otx_cpt_dev_config,
@@ -458,7 +503,7 @@ otx_cpt_dev_create(struct rte_cryptodev *c_dev)
 	c_dev->dev_ops = &cptvf_ops;
 
 	c_dev->enqueue_burst = otx_cpt_pkt_enqueue;
-	c_dev->dequeue_burst = NULL;
+	c_dev->dequeue_burst = otx_cpt_pkt_dequeue;
 
 	c_dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
 			RTE_CRYPTODEV_FF_HW_ACCELERATED |
-- 
2.7.4



More information about the dev mailing list