[dpdk-dev] [PATCH v2 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow

Dekel Peled dekelp at mellanox.com
Sun Oct 7 16:25:07 CEST 2018


This patch adds support for Direct Verbs encap operations, L2 and L3.

Signed-off-by: Dekel Peled <dekelp at mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_dv.c | 226 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 222 insertions(+), 4 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 80e7b24..221c76a 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -84,6 +84,167 @@
 }
 
 /**
+ * Validate the tunnel encap action.
+ *
+ * @param[in] action_flags
+ *   holds the actions detected until now.
+ * @param[in] action
+ *   Pointer to the encap action.
+ * @param[in] attr
+ *   Pointer to flow attributes
+ * @param[out] error
+ *   Pointer to error structure.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+flow_dv_validate_action_tunnel_encap(uint64_t action_flags,
+				     const struct rte_flow_action *action,
+				     const struct rte_flow_attr *attr,
+				     struct rte_flow_error *error)
+{
+	const struct rte_flow_action_tunnel_encap *tunnel_encap = action->conf;
+
+	if (!tunnel_encap || !(tunnel_encap->buf))
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ACTION, action,
+					  "configuration cannot be null");
+	if (action_flags & MLX5_FLOW_ACTION_DROP)
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+					  "can't drop and encap in same flow");
+	if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
+			    MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+					  "can't have 2 encap actions in same"
+					  " flow");
+	if (attr->ingress)
+		return rte_flow_error_set(error, ENOTSUP,
+					RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, NULL,
+					"encap action not supported for "
+					"ingress");
+	return 0;
+}
+
+/**
+ * Validate the tunnel encap L3 action
+ *
+ * @param[in] action_flags
+ *   holds the actions detected until now.
+ * @param[in] action
+ *   Pointer to the encap action.
+ * @param[in] attr
+ *   Pointer to flow attributes
+ * @param[out] error
+ *   Pointer to error structure.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+flow_dv_validate_action_tunnel_encap_l3(uint64_t action_flags,
+					const struct rte_flow_action *action,
+					const struct rte_flow_attr *attr,
+					struct rte_flow_error *error)
+{
+	const struct rte_flow_action_tunnel_encap_l3 *tunnel_encap_l3 =
+			action->conf;
+
+	if (!tunnel_encap_l3 || !(tunnel_encap_l3->buf))
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ACTION, action,
+					  "configuration cannot be null");
+	if (action_flags & MLX5_FLOW_ACTION_DROP)
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+					  "can't drop and encap in same flow");
+	if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
+			    MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+					  "can't have 2 encap actions in same"
+					  " flow");
+	if (attr->ingress)
+		return rte_flow_error_set(error, ENOTSUP,
+					  RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+					  NULL,
+					  "encap action not supported for "
+					  "ingress");
+	return 0;
+}
+
+/**
+ * Convert encap action to DV specification.
+ *
+ * @param[in] action
+ *   Pointer to action structure.
+ * @param[in] dev
+ *   Pointer to rte_eth_dev structure.
+ * @param[out] error
+ *   Pointer to the error structure.
+ *
+ * @return
+ *   Pointer to action on success, NULL otherwise and rte_errno is set.
+ */
+static struct ibv_flow_action *
+flow_dv_create_encap(const struct rte_flow_action *action,
+		     struct rte_eth_dev *dev,
+		     struct rte_flow_error *error)
+{
+	struct ibv_flow_action *encap_verb = NULL;
+	const struct rte_flow_action_tunnel_encap *encap_data;
+	struct priv *priv = dev->data->dev_private;
+
+	encap_data = (const struct rte_flow_action_tunnel_encap *)action->conf;
+	encap_verb = mlx5_glue->dv_create_flow_action_packet_reformat
+		(priv->ctx, encap_data->size,
+		 encap_data->size ? encap_data->buf : NULL,
+		 MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
+		 MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
+	if (!encap_verb)
+		rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+				   NULL, "cannot create encap action");
+	return encap_verb;
+}
+
+/**
+ * Convert encap L3 action to DV specification.
+ *
+ * @param[in] action
+ *   Pointer to action structure.
+ * @param[in] dev
+ *   Pointer to rte_eth_dev structure.
+ * @param[out] error
+ *   Pointer to the error structure.
+ *
+ * @return
+ *   Pointer to action on success, NULL otherwise and rte_errno is set.
+ */
+static struct ibv_flow_action *
+flow_dv_create_encap_l3(const struct rte_flow_action *action,
+			struct rte_eth_dev *dev,
+			struct rte_flow_error *error)
+{
+	struct ibv_flow_action *encap_l3_verb = NULL;
+	const struct rte_flow_action_tunnel_encap_l3 *encap_l3_data;
+	struct priv *priv = dev->data->dev_private;
+
+	encap_l3_data =
+		(const struct rte_flow_action_tunnel_encap_l3 *)action->conf;
+	encap_l3_verb = mlx5_glue->dv_create_flow_action_packet_reformat
+		(priv->ctx, encap_l3_data->size,
+		 encap_l3_data->size ? encap_l3_data->buf : NULL,
+		 MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L3_TUNNEL,
+		 MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
+	if (!encap_l3_verb)
+		rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+				   NULL, "cannot create encap L3 action");
+	return encap_l3_verb;
+}
+
+/**
  * Verify the @p attributes will be correctly understood by the NIC and store
  * them in the @p flow if everything is correct.
  *
@@ -330,6 +491,20 @@
 			action_flags |= MLX5_FLOW_ACTION_COUNT;
 			++actions_n;
 			break;
+		case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP:
+			ret = flow_dv_validate_action_tunnel_encap
+				(action_flags, actions, attr, error);
+			if (ret < 0)
+				return ret;
+			action_flags |= MLX5_FLOW_ACTION_TUNNEL_ENCAP;
+			break;
+		case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP_L3:
+			ret = flow_dv_validate_action_tunnel_encap_l3
+				(action_flags, actions, attr, error);
+			if (ret < 0)
+				return ret;
+			action_flags |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
+			break;
 		default:
 			return rte_flow_error_set(error, ENOTSUP,
 						  RTE_FLOW_ERROR_TYPE_ACTION,
@@ -1042,10 +1217,19 @@
  *   Flow action to translate.
  * @param[in, out] dev_flow
  *   Pointer to the mlx5_flow.
+ * @param[in] dev
+ *   Pointer to rte_eth_dev structure.
+ * @param[out] error
+ *   Pointer to the error structure.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_ernno is set.
  */
-static void
+static int
 flow_dv_create_action(const struct rte_flow_action *action,
-		      struct mlx5_flow *dev_flow)
+		      struct mlx5_flow *dev_flow,
+		      struct rte_eth_dev *dev,
+		      struct rte_flow_error *error)
 {
 	const struct rte_flow_action_queue *queue;
 	const struct rte_flow_action_rss *rss;
@@ -1092,10 +1276,35 @@
 		/* Added to array only in apply since we need the QP */
 		flow->actions |= MLX5_FLOW_ACTION_RSS;
 		break;
+	case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP:
+		dev_flow->dv.actions[actions_n].type =
+			MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+		dev_flow->dv.actions[actions_n].action =
+			flow_dv_create_encap(action, dev, error);
+		if (!(dev_flow->dv.actions[actions_n].action))
+			return -rte_errno;
+		dev_flow->dv.encap_verb =
+			dev_flow->dv.actions[actions_n].action;
+		flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP;
+		actions_n++;
+		break;
+	case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP_L3:
+		dev_flow->dv.actions[actions_n].type =
+			MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+		dev_flow->dv.actions[actions_n].action =
+			flow_dv_create_encap_l3(action, dev, error);
+		if (!(dev_flow->dv.actions[actions_n].action))
+			return -rte_errno;
+		dev_flow->dv.encap_verb =
+			dev_flow->dv.actions[actions_n].action;
+		flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
+		actions_n++;
+		break;
 	default:
 		break;
 	}
 	dev_flow->dv.actions_n = actions_n;
+	return 0;
 }
 
 static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
@@ -1259,8 +1468,10 @@
 	matcher.egress = attr->egress;
 	if (flow_dv_matcher_register(dev, &matcher, dev_flow, error))
 		return -rte_errno;
-	for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
-		flow_dv_create_action(actions, dev_flow);
+	for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+		if (flow_dv_create_action(actions, dev_flow, dev, error))
+			return -rte_errno;
+	}
 	return 0;
 }
 
@@ -1444,6 +1655,13 @@
 		LIST_REMOVE(dev_flow, next);
 		if (dev_flow->dv.matcher)
 			flow_dv_matcher_release(dev, dev_flow->dv.matcher);
+
+		if (dev_flow->dv.encap_verb) {
+			claim_zero(mlx5_glue->destroy_flow_action
+						(dev_flow->dv.encap_verb));
+			dev_flow->dv.encap_verb = NULL;
+		}
+
 		rte_free(dev_flow);
 	}
 }
-- 
1.8.3.1



More information about the dev mailing list