[dpdk-dev] [PATCH 3/3] net/mlx5: eswitch-modify TTL actions

Xiaoyu Min jackmin at mellanox.com
Mon Oct 8 08:57:55 CEST 2018


On 18-10-04 04:07:02, Yongseok Koh wrote:
> On Tue, Sep 25, 2018 at 09:47:18PM +0800, Xiaoyu Min wrote:
> > Offload following modify TTL actions to E-Swtich via
> > TC-Flower driver
> > 
> > - RTE_FLOW_ACTION_TYPE_SET_TTL
> > - RTE_FLOW_ACTION_TYPE_DEC_TTL
> > 
> > The corresponding IP protocol rte_flow_item_ipv[4|6]
> > must be present in rte_flow pattern otherwith PMD
> > return error
> > 
> > Signed-off-by: Xiaoyu Min <jackmin at mellanox.com>
> > ---
> 
> As it is quite similar to the other patch of IP addr and UDP/TCP port, I have
> the same comments on this patch too.
> 
> Two more things.
> 
> 1) commit title.
> 'eswitch' isn't allowed. Like you mentioned in the commit message, it is
> officially E-Switch. And I'm curious why '-' is needed for the title.
> 
Yes you are right I should use officially one.
'-' is wrongly used, I will remove it.
> 2) MLX5_ACTION_*
> As there are a few more pending patches which add new actions - encap/decap and
> multi-table, we may have to have final rebasing in order at the last moment.
> 
Definitely we need.
> 
> Thanks,
> Yongseok
> 
> >  drivers/net/mlx5/mlx5_flow.h     |  2 +
> >  drivers/net/mlx5/mlx5_flow_tcf.c | 74 +++++++++++++++++++++++++++++++-
> >  2 files changed, 74 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> > index be182a643..5237e31dd 100644
> > --- a/drivers/net/mlx5/mlx5_flow.h
> > +++ b/drivers/net/mlx5/mlx5_flow.h
> > @@ -93,6 +93,8 @@
> >  #define MLX5_ACTION_SET_IPV6_DST (1u << 14)
> >  #define MLX5_ACTION_SET_TP_SRC (1u << 15)
> >  #define MLX5_ACTION_SET_TP_DST (1u << 16)
> > +#define MLX5_ACTION_SET_TTL (1u << 17)
> > +#define MLX5_ACTION_DEC_TTL (1u << 18)
> >  
> >  /* possible L3 layers protocols filtering. */
> >  #define MLX5_IP_PROTOCOL_TCP 6
> > diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
> > index 85c92f369..af88c4a0d 100644
> > --- a/drivers/net/mlx5/mlx5_flow_tcf.c
> > +++ b/drivers/net/mlx5/mlx5_flow_tcf.c
> > @@ -217,6 +217,10 @@ struct tc_pedit_sel {
> >  #define TP_PORT_LEN 2 /* Transport Port (UDP/TCP) Length */
> >  #endif
> >  
> > +#ifndef TTL_LEN
> > +#define TTL_LEN 1
> > +#endif
> > +
> >  /** Empty masks for known item types. */
> >  static const union {
> >  	struct rte_flow_item_port_id port_id;
> > @@ -297,7 +301,9 @@ struct flow_tcf_ptoi {
> >  		(act) == RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC  || \
> >  		(act) == RTE_FLOW_ACTION_TYPE_SET_IPV6_DST  || \
> >  		(act) == RTE_FLOW_ACTION_TYPE_SET_TP_SRC    || \
> > -		(act) == RTE_FLOW_ACTION_TYPE_SET_TP_DST) ?    \
> > +		(act) == RTE_FLOW_ACTION_TYPE_SET_TP_DST    || \
> > +		(act) == RTE_FLOW_ACTION_TYPE_SET_TTL       || \
> > +		(act) == RTE_FLOW_ACTION_TYPE_DEC_TTL) ?       \
> >  		1 : 0; })
> >  #define MAX_PEDIT_KEYS (128)
> >  #define SZ_PEDIT_KEY_VAL (4)
> > @@ -321,6 +327,34 @@ flow_tcf_calc_pedit_keys(const uint64_t size)
> >  	return keys;
> >  }
> >  
> > +static void
> > +flow_tcf_pedit_key_set_dec_ttl(const struct rte_flow_action *actions,
> > +				struct pedit_parser *p_parser,
> > +				uint64_t item_flags)
> > +{
> > +	int idx = p_parser->sel.nkeys;
> > +
> > +	p_parser->keys[idx].mask = 0xFFFFFF00;
> > +	if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4) {
> > +		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP4;
> > +		p_parser->keys[idx].off = 8; /* IPv4 TTL Offset */
> > +	}
> > +	if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV6) {
> > +		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP6;
> > +		p_parser->keys[idx].off = 7; /* IPv6 HopLimit Offset */
> > +	}
> > +	if (actions->type == RTE_FLOW_ACTION_TYPE_DEC_TTL) {
> > +		p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_ADD;
> > +		p_parser->keys[idx].val = 0xFF;
> > +	} else {
> > +		p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
> > +		p_parser->keys[idx].val =
> > +			((const struct rte_flow_action_set_ttl *)
> > +			 actions->conf)->ttl_value;
> > +	}
> > +	p_parser->sel.nkeys = (++idx);
> > +}
> > +
> >  static void
> >  flow_tcf_pedit_key_set_tp_port(const struct rte_flow_action *actions,
> >  				struct pedit_parser *p_parser,
> > @@ -408,6 +442,11 @@ flow_tcf_create_pedit_mnl_msg(struct nlmsghdr *nl,
> >  			flow_tcf_pedit_key_set_tp_port(*actions,
> >  							&p_parser, item_flags);
> >  			break;
> > +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> > +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> > +			flow_tcf_pedit_key_set_dec_ttl(*actions,
> > +							&p_parser, item_flags);
> > +			break;
> >  		default:
> >  			goto pedit_mnl_msg_done;
> >  		}
> > @@ -488,6 +527,14 @@ flow_tcf_get_pedit_actions_size(const struct rte_flow_action **actions,
> >  			keys += flow_tcf_calc_pedit_keys(TP_PORT_LEN);
> >  			flags |= MLX5_ACTION_SET_TP_DST;
> >  			break;
> > +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> > +			keys += flow_tcf_calc_pedit_keys(TTL_LEN);
> > +			flags |= MLX5_ACTION_SET_TTL;
> > +			break;
> > +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> > +			keys += flow_tcf_calc_pedit_keys(TTL_LEN);
> > +			flags |= MLX5_ACTION_DEC_TTL;
> > +			break;
> >  		default:
> >  			goto get_pedit_action_size_done;
> >  		}
> > @@ -988,13 +1035,20 @@ flow_tcf_validate(struct rte_eth_dev *dev,
> >  		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> >  			action_flags |= MLX5_ACTION_SET_TP_DST;
> >  			break;
> > +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> > +			action_flags |= MLX5_ACTION_SET_TTL;
> > +			break;
> > +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> > +			action_flags |= MLX5_ACTION_DEC_TTL;
> > +			break;
> >  		default:
> >  			return rte_flow_error_set(error, ENOTSUP,
> >  						  RTE_FLOW_ERROR_TYPE_ACTION,
> >  						  actions,
> >  						  "action not supported");
> >  		}
> > -		if (IS_MODIFY_ACTION(actions->type)) {
> > +		if (IS_MODIFY_ACTION(actions->type) &&
> > +		    actions->type != RTE_FLOW_ACTION_TYPE_DEC_TTL) {
> >  			if (!actions->conf)
> >  				return rte_flow_error_set(error, ENOTSUP,
> >  						RTE_FLOW_ERROR_TYPE_ACTION_CONF,
> > @@ -1029,6 +1083,16 @@ flow_tcf_validate(struct rte_eth_dev *dev,
> >  						"no TCP/UDP item found in"
> >  						" pattern");
> >  	}
> > +	if (action_flags &
> > +	   (MLX5_ACTION_SET_TTL | MLX5_ACTION_DEC_TTL)) {
> > +		if (!(item_flags &
> > +		     (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
> > +		      MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
> > +			return rte_flow_error_set(error, ENOTSUP,
> > +						  RTE_FLOW_ERROR_TYPE_ACTION,
> > +						  actions,
> > +						  "no IP found in pattern");
> > +	}
> >  	return 0;
> >  }
> >  
> > @@ -1178,6 +1242,8 @@ flow_tcf_get_actions_and_size(const struct rte_flow_action actions[],
> >  		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> >  		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> >  		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> > +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> > +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> >  			size += flow_tcf_get_pedit_actions_size(&actions,
> >  								&flags);
> >  			break;
> > @@ -1451,6 +1517,7 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
> >  						  RTE_BE16(0x0fff)));
> >  			break;
> >  		case RTE_FLOW_ITEM_TYPE_IPV4:
> > +			item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
> >  			mask.ipv4 = flow_tcf_item_mask
> >  				(items, &rte_flow_item_ipv4_mask,
> >  				 &flow_tcf_mask_supported.ipv4,
> > @@ -1490,6 +1557,7 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
> >  			}
> >  			break;
> >  		case RTE_FLOW_ITEM_TYPE_IPV6:
> > +			item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
> >  			mask.ipv6 = flow_tcf_item_mask
> >  				(items, &rte_flow_item_ipv6_mask,
> >  				 &flow_tcf_mask_supported.ipv6,
> > @@ -1718,6 +1786,8 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
> >  		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> >  		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> >  		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> > +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> > +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> >  			na_act_index =
> >  				mnl_attr_nest_start(nlh, na_act_index_cur++);
> >  			flow_tcf_create_pedit_mnl_msg(nlh,
> > -- 
> > 2.17.1
> > 


More information about the dev mailing list