[dpdk-dev] [PATCH v3 3/3] net/cxgbe: add flow actions to modify IP and TCP/UDP port address
Rahul Lakkireddy
rahul.lakkireddy at chelsio.com
Tue Oct 9 14:39:17 CEST 2018
On Tuesday, October 10/09/18, 2018 at 17:55:09 +0530, Ferruh Yigit wrote:
> On 10/9/2018 9:44 AM, Rahul Lakkireddy wrote:
> > Query firmware for the new filter work request to offload flows with
> > actions to modify IP and TCP/UDP port addresses. When available,
> > translate IP and TCP/UDP port address modify actions to internal
> > hardware specification and offload the flow to hardware.
> >
> > Original work by Shagun Agrawal
> >
> > Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy at chelsio.com>
>
> <...>
>
> > @@ -458,6 +611,16 @@ cxgbe_rtef_parse_actions(struct rte_flow *flow,
> > case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
> > case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
> > case RTE_FLOW_ACTION_TYPE_PHY_PORT:
> > + case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
> > + case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
> > + nat_ipv4++;
> > + goto action_switch;
> > + case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
> > + case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> > + nat_ipv6++;
> > + case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> > + case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
>
> This is causing build error [1], fall through seems OK/intended, I will add [2]
> while merging to clarify it. Please shout if you prefer another fix.
>
Yes, fall through is intended here. I'm fine with [2]. Thanks for fixing
it.
> [1]
> .../drivers/net/cxgbe/cxgbe_flow.c: In function ‘cxgbe_rtef_parse_actions’:
> .../drivers/net/cxgbe/cxgbe_flow.c:620:12: error: this statement may fall
> through [-Werror=implicit-fallthrough=]
> nat_ipv6++;
> ~~~~~~~~^~
> .../drivers/net/cxgbe/cxgbe_flow.c:621:3: note: here
> case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> ^~~~
>
>
> [2]
> diff --git a/drivers/net/cxgbe/cxgbe_flow.c b/drivers/net/cxgbe/cxgbe_flow.c
> index 52cb3bdf4..3e4acf333 100644
> --- a/drivers/net/cxgbe/cxgbe_flow.c
> +++ b/drivers/net/cxgbe/cxgbe_flow.c
> @@ -618,6 +618,7 @@ cxgbe_rtef_parse_actions(struct rte_flow *flow,
> case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
> case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
> nat_ipv6++;
> + goto action_switch;
> case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
> case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> action_switch:
Thanks,
Rahul
More information about the dev
mailing list