[dpdk-dev] [PATCH v2 4/4] net/mlx5: add L2 and L3 decap to Direct Verbs flow
Dekel Peled
dekelp at mellanox.com
Tue Oct 9 18:56:26 CEST 2018
Thanks, PSB.
> -----Original Message-----
> From: Yongseok Koh
> Sent: Tuesday, October 9, 2018 12:19 AM
> To: Dekel Peled <dekelp at mellanox.com>
> Cc: Shahaf Shuler <shahafs at mellanox.com>; dev at dpdk.org; Ori Kam
> <orika at mellanox.com>
> Subject: Re: [PATCH v2 4/4] net/mlx5: add L2 and L3 decap to Direct Verbs
> flow
>
> On Sun, Oct 07, 2018 at 05:25:08PM +0300, Dekel Peled wrote:
> > This patch adds support for Direct Verbs decap operations, L2 and L3.
> >
> > Signed-off-by: Dekel Peled <dekelp at mellanox.com>
>
> Same comment for the order of 'dev' arg.
Done.
>
> > Conflicts:
> > drivers/net/mlx5/mlx5_flow_dv.c
>
> What is this? Conflicts?
My bad, fixed.
>
> > ---
> > drivers/net/mlx5/mlx5_flow_dv.c | 224
> > +++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 219 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> > b/drivers/net/mlx5/mlx5_flow_dv.c index 221c76a..5b44f5b 100644
> > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > @@ -120,11 +120,18 @@
> > RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > "can't have 2 encap actions in same"
> > " flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> > + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't encap and decap in same"
> > + " flow");
> > if (attr->ingress)
> > return rte_flow_error_set(error, ENOTSUP,
> > -
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, NULL,
> > - "encap action not supported for "
> > - "ingress");
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> > + NULL,
> > + "encap action not supported for "
> > + "ingress");
>
> It seems to be mistakenly included in this patch when you rebase the
> previous patch. Please fix it in [4/4] and [3/4].
Done.
>
> > return 0;
> > }
> >
> > @@ -166,6 +173,12 @@
> > RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > "can't have 2 encap actions in same"
> > " flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> > + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't encap and decap in same"
> > + " flow");
> > if (attr->ingress)
> > return rte_flow_error_set(error, ENOTSUP,
> >
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, @@ -176,6 +189,100 @@ }
> >
> > /**
> > + * Validate the tunnel decap action
> > + *
> > + * @param[in] action_flags
> > + * holds the actions detected until now.
> > + * @param[in] attr
> > + * Pointer to flow attributes
> > + * @param[out] error
> > + * Pointer to error structure.
> > + *
> > + * @return
> > + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_tunnel_decap(uint64_t action_flags,
> > + const struct rte_flow_attr *attr,
> > + struct rte_flow_error *error) {
> > + if (action_flags & MLX5_FLOW_ACTION_DROP)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't drop and decap in same
> flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> > + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't have 2 decap actions in same"
> > + " flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> > + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't encap and decap in same"
> > + " flow");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
> > + "decap action not supported for "
> > + "egress");
> > + return 0;
> > +}
> > +
> > +/**
> > + * Validate the tunnel decap L3 action
> > + *
> > + * @param[in] action_flags
> > + * holds the actions detected until now.
> > + * @param[in] action
> > + * Pointer to the decap action.
> > + * @param[in] attr
> > + * Pointer to flow attributes
> > + * @param[out] error
> > + * Pointer to error structure.
> > + *
> > + * @return
> > + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_tunnel_decap_l3(uint64_t action_flags,
> > + const struct rte_flow_action *action,
> > + const struct rte_flow_attr *attr,
> > + struct rte_flow_error *error)
> > +{
> > + const struct rte_flow_action_tunnel_decap_l3 *tunnel_decap_l3 =
> > + action->conf;
> > +
> > + if (!tunnel_decap_l3 || !(tunnel_decap_l3->buf))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> action,
> > + "configuration cannot be null");
> > + if (action_flags & MLX5_FLOW_ACTION_DROP)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't drop and decap in same
> flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> > + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't have 2 decap actions in same"
> > + " flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> > + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't encap and decap in same"
> > + " flow");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
> > + "decap action not supported for "
> > + "egress");
> > + return 0;
> > +}
> > +
> > +/**
> > * Convert encap action to DV specification.
> > *
> > * @param[in] action
> > @@ -245,6 +352,72 @@
> > }
> >
> > /**
> > + * Convert decap action to DV specification.
> > + *
> > + * @param[in] action
> > + * Pointer to action structure.
> > + * @param[in] dev
> > + * Pointer to rte_eth_dev structure.
> > + * @param[out] error
> > + * Pointer to the error structure.
> > + *
> > + * @return
> > + * Pointer to action on success, NULL otherwise and rte_errno is set.
> > + */
> > +static struct ibv_flow_action *
> > +flow_dv_create_decap(const struct rte_flow_action *action
> __rte_unused,
> > + struct rte_eth_dev *dev,
> > + struct rte_flow_error *error)
> > +{
> > + struct ibv_flow_action *decap_verb = NULL;
> > + struct priv *priv = dev->data->dev_private;
> > +
> > + decap_verb = mlx5_glue->dv_create_flow_action_packet_reformat
> > + (priv->ctx, 0, NULL,
> > +
> MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
> > + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> > + if (!decap_verb)
> > + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> > + NULL, "cannot create decap action");
> > + return decap_verb;
> > +}
> > +
> > +/**
> > + * Convert decap L3 action to DV specification.
> > + *
> > + * @param[in] action
> > + * Pointer to action structure.
> > + * @param[in] dev
> > + * Pointer to rte_eth_dev structure.
> > + * @param[out] error
> > + * Pointer to the error structure.
> > + *
> > + * @return
> > + * Pointer to action on success, NULL otherwise and rte_errno is set.
> > + */
> > +static struct ibv_flow_action *
> > +flow_dv_create_decap_l3(const struct rte_flow_action *action,
> > + struct rte_eth_dev *dev,
> > + struct rte_flow_error *error)
> > +{
> > + struct ibv_flow_action *decap_l3_verb = NULL;
> > + const struct rte_flow_action_tunnel_decap_l3 *decap_l3_data;
> > + struct priv *priv = dev->data->dev_private;
> > +
> > + decap_l3_data =
> > + (const struct rte_flow_action_tunnel_decap_l3 *)action-
> >conf;
> > + decap_l3_verb = mlx5_glue-
> >dv_create_flow_action_packet_reformat
> > + (priv->ctx, decap_l3_data->size,
> > + decap_l3_data->size ? decap_l3_data->buf : NULL,
> > +
> MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_TO_L2,
> > + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> > + if (!decap_l3_verb)
> > + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> > + NULL, "cannot create decap L3 action");
> > + return decap_l3_verb;
> > +}
> > +
> > +/**
> > * Verify the @p attributes will be correctly understood by the NIC and
> store
> > * them in the @p flow if everything is correct.
> > *
> > @@ -505,6 +678,20 @@
> > return ret;
> > action_flags |=
> MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> > break;
> > + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
> > + ret = flow_dv_validate_action_tunnel_decap
> > + (action_flags, attr, error);
> > + if (ret < 0)
> > + return ret;
> > + action_flags |=
> MLX5_FLOW_ACTION_TUNNEL_DECAP;
> > + break;
> > + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
> > + ret = flow_dv_validate_action_tunnel_decap_l3
> > + (action_flags, actions, attr, error);
> > + if (ret < 0)
> > + return ret;
> > + action_flags |=
> MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
> > + break;
> > default:
> > return rte_flow_error_set(error, ENOTSUP,
> >
> RTE_FLOW_ERROR_TYPE_ACTION,
> > @@ -1300,6 +1487,30 @@
> > flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> > actions_n++;
> > break;
> > + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
> > + dev_flow->dv.actions[actions_n].type =
> > + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> > + dev_flow->dv.actions[actions_n].action =
> > + flow_dv_create_decap(action, dev, error);
> > + if (!(dev_flow->dv.actions[actions_n].action))
> > + return -rte_errno;
> > + dev_flow->dv.decap_verb =
> > + dev_flow->dv.actions[actions_n].action;
> > + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP;
> > + actions_n++;
> > + break;
> > + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
> > + dev_flow->dv.actions[actions_n].type =
> > + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> > + dev_flow->dv.actions[actions_n].action =
> > + flow_dv_create_decap_l3(action, dev, error);
> > + if (!(dev_flow->dv.actions[actions_n].action))
> > + return -rte_errno;
> > + dev_flow->dv.decap_verb =
> > + dev_flow->dv.actions[actions_n].action;
> > + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
> > + actions_n++;
> > + break;
> > default:
> > break;
> > }
> > @@ -1655,13 +1866,16 @@
> > LIST_REMOVE(dev_flow, next);
> > if (dev_flow->dv.matcher)
> > flow_dv_matcher_release(dev, dev_flow-
> >dv.matcher);
> > -
>
> It seems to be mistakenly included in this patch when you rebase the
> previous patch. Please fix it in [4/4] and [3/4].
Done.
>
> > if (dev_flow->dv.encap_verb) {
> > claim_zero(mlx5_glue->destroy_flow_action
> > (dev_flow->dv.encap_verb));
> > dev_flow->dv.encap_verb = NULL;
> > }
> > -
>
> Same here.
Done.
>
> > + if (dev_flow->dv.decap_verb) {
> > + claim_zero(mlx5_glue->destroy_flow_action
> > + (dev_flow->dv.decap_verb));
> > + dev_flow->dv.decap_verb = NULL;
> > + }
> > rte_free(dev_flow);
> > }
> > }
> > --
> > 1.8.3.1
> >
More information about the dev
mailing list